Liu User

How to Repair Broken Car Keys

When your car key breaks you'll need urgent help. You can either wait for the dealership to give you a replacement which can be a hassle or you can find other options to travel, such as taking public transportation or relying on friends to take you around.

If you've got the right tools, you can perform some DIY fixes. You can make use of penetrating oils and needle-nosed pliers.

Damage Assessment

There's nothing more annoying than getting ready to get in your car to go somewhere only to realize that your keys have broken in the ignition. It's a common problem that can happen to anyone and it can be a major stressor when you're in a hurry to get to where you want to be.

Take a deep breath and don't get stressed. Being calm will allow you to make rational decisions and prevent further harm.

Then, you should examine the broken key to see what remains of the key and what percentage of the crack is inside the lock or the ignition cylinder. If the broken piece is inside the lock, you can apply a lubricant, such as WD-40 to loosen it up and make it easier to remove. If the broken part is located in the ignition, you will need to remove it with the special tool called a key extractor.

If the key is in the ring, you may try to bend the key back by using pliers. This can be a challenge particularly if the break is near one of the connectors. If you're unable to get it bent back into position then you can use a paperclip to grab the end of the key and pull straight outward.

Trying to force the key into the ignition is likely to result in more damage and make it impossible to take it out. If you are unable to remove a damaged key contact a locksmith or visit the dealership for your car.

Many different hacks are available online which claim to fix broken keys to cars, but some of them can actually make the situation worse. If you attempt to remove a damaged car key with the help of a screwdriver, it could push the key further into the ignition. It may even harm the lock. To avoid this, don't insert anything other than a tool specifically made for removing keys from the keyhole.

Removing the Broken Part

Car keys are fragile and even a small impact or use can cause them to break inside the ignition. It can be difficult to fix this issue without the help of a professional. You could cause further damage by trying to fix the damaged key. Super glue and other methods are not recommended because they can be hard to remove and might cause further damage to the ignition cylinder.

Utilizing a magnet to take out the broken key is an unwise idea. Magnets can harm the electrical components of the ignition cylinder and make it more difficult to pull the damaged key out. Using excessive force or sudden movements while trying to turn the key is another common mistake that can result in a broken car key.

If the key fragment is visible and exposed, pliers and tongs can be used. If the key is not visible and is stuck in the ignition, a small hacksaw or other thin-profiled tool can be wedged to catch the edge and then remove it.

It is also possible to use penetrating oils to lubricate and reduce friction in the keyhole. Applying the oil and allowing it to sit for a couple of minutes could make it easier to remove the broken key fragment. If the oil isn't working it is possible to use a key extractor that can be used to extract the damaged car key from the ignition.

A locksmith will have to replace the key in the event that it is completely damaged in the ignition. A professional locksmith will reassemble all the components and use them as a model to create an entirely new key that is as close as possible to the original. This ensures that the key functions correctly and reduces the risk of misalignment inside the lock or ignition. This could lead to more issues that require costly and lengthy repairs. It is recommended to regularly inspect and replace the keys on your car to avoid them becoming damaged or worn to the point of breaking.

Removing the Broken Blade from the Ignition

You may cause more damage if you push the key into the ignition. You can use any tools you have at home to take it out it safely.

In this situation Tweezers can be a lifesaver. automotive key repair can grasp onto the broken key from a car and help remove it. You can also find dental picks, which are thin pointed tools that could be useful. You can also use a coat hanger made of wire that fits inside the lock. You might tap the metal against an unfinished surface to release the broken key.

You can also make use of the mini hacksaw, which is available at most hardware stores. This is thinner than a screwdriver, and can be inserted into the lock to latch onto the damaged car key. This may be enough to remove it without damaging the ignition. You can also use thin needle-nosed pliers that will connect to the broken car key. If you're attempting a tool such as this, be sure to keep acetone and cotton swabs handy to get any glue that is on the tip of the pliers once you've removed it.

It's not a good idea to use magnets in the removal of a damaged car key. Magnets aren't made to be used near the ignition and can cause further damage to the electrical components within. They also can push the broken pieces of the key deeper into the ignition, making it difficult to remove them.


After you have removed the key, you should check the ignition for any visible signs of damage. If you do notice any cracks or bending, it's best to call a professional locksmith. They can repair your keys without damaging the ignition of your vehicle. They can also offer tips on how to avoid further damage. Keeping both pieces of your damaged car key will help them better understand the original shape of the key, and they can create a precise duplicate for you.

How to get a new key

If your car key is damaged there are a few things that you can do. The most important thing to keep in mind is not to force your broken key into the ignition or lock since this could cause more damage and lead to costly repairs in the future. Instead, it is best to call an locksmith immediately to get a professional solution.

The cap of the plastic on your key with clear tape will give support and prevent further damage. Super glue is another option. To do this, wash the broken pieces and apply a tiny dab of super glue to each. After the glue is dry it is possible to attempt to press the pieces together to try again and hopefully get your key to work.

You can also call the dealer to obtain an alternative key. This could be a good option because it will ensure that you get an exact match for your car and that the key is linked to the vehicle. remote key fob repair is usually more expensive than a locksmith, however it could be the fastest and easiest solution to your issue.

A professional locksmith will be able to provide you with a spare key which can be useful in case of future emergencies. You can also lower the chance of your key breaking in the future by taking care of it with the key protector and having a backup plan in case of emergency.

A broken car key can be painful, particularly when you attempt to start your car only to discover that it isn't turning over. It is tempting to take the situation to your own, but DIY fixes often backfire and can lead to problems with locks and ignition systems. If you push your key into the ignition, it may harm the battery in the keyfob, or cause problems that require expensive repairs. It is recommended to speak with an expert in these circumstances. A professional locksmith for cars will be able to quickly and easily solve the issue without damaging your vehicle or causing further issues.

Member since: Wednesday, October 2, 2024

Website: https://botdb.win/wiki/10_Basics_About_Car_Key_Repair_Near_Me_You_Didnt_Learn_In_School