Daley User

How to Replace a UPVC Door Replacement Lock

If your door lock jams or doesn't work as it should, you may need to replace it. The procedure may seem complex but it's actually quite easy and doesn't require the help of the services of a locksmith.

A few tools of the trade along with a bit of patience and a lot of care will do the trick. Here's what you need to do:

Take a measurement of the door

If you're having trouble locking your uPVC door or it isn't closing, then it could be the time to replace it. If you've recently moved into a new home, a tenant left without returning keys, or your multipoint gearbox is showing signs of wear and tear, replacing the barrel of your lock to an alternative one will give you an extra layer security.

It is necessary to take measurements prior to buying a new lock. This will ensure that the new lock will fit properly and not interfere with your home's security. The backset is the most crucial. This is the distance between the centre of your keyhole bore hole and the edge of your door. It's typically 2 3/8 or 2 3/4 inches. Take the length of the measurement using a measuring tape and write down the results.

You'll also need to know the faceplate's width. This is the thickness of the part that covers the mechanism of the lock. If possible, purchase a replacement lock made by the same manufacturer since they'll be made according to the same dimensions. If you cannot find the manufacturer's name or mark on the lock, you can measure the width of the cylinder. You can also determine the width of the existing cylinder by placing a pencil on the keyhole.

Once you have the dimensions you can begin the process of removing the old cylinder. Begin by loosening the screw that holds the handle together using the Phillips-head screwdriver. Then, loosen the screws that hold the handles on the exterior and interior together. After these screws have been removed, you can remove the barrel screw on the handle's exterior and remove the cylinder.

If the cylinder becomes stuck in the lock, you could try using WD-40, or another lubricant. It is important to not force it out. Forcing it out can cause damage to your lock's internal gearbox. Consider upgrading to a lock that comes with anti-snap, antibump and anti-snap protection. This will help to make it more resistant to attacks from thieves.

Source the Lock

If you're replacing an old lock following a burglary or upgrading for greater security There are a few points to keep in mind when sourcing your new door lock. To ensure quality and fit, make sure you buy the right size cylinder and from an established manufacturer. You'll also require some essential tools to complete the job, including tape measure, screwdriver and rubber mallet.

There are many signs that your upvc lock is wearing out and requires to be replaced. Common problems are visible damage to the lock or a handle that's loose and not fitting correctly. If the lock starts jamming or doesn't lock at all, it's time to consider replacing it.

Once you've selected the perfect lock, you must install it correctly to ensure that it operates properly and locks securely. Follow the manufacturer's instructions to install the new multipoint lock mechanism into the door's upvc panel and attach the correct faceplates and handles. Test the mechanism by locking the door and then unlocking it from both the inside and outside. If everything looks good you're ready to celebrate your achievement.

It may seem difficult to change the lock on a upvc however, you can do it yourself with the help of locksmith. By recognizing the indicators that your lock is in need for replacement and having all the tools needed it's an easy task.


Be aware that a lock made of upvc can benefit from lubrication, as with any other moving component. A few sprays or a little graphite powder can help prolong their lifespan by reducing excessive friction. Regular cleaning of your door lock mechanisms with WD-40 and a damp cloth can help to keep them in good condition.

Take out the Cylinder

It may be time to replace the barrel of your lock If you're having issues with your door made of upvc. This is a straightforward DIY project and can be completed in only few minutes, and is an effective method of maintaining home security. The most important thing to remember is identifying the brand of your existing lock to ensure that you find an appropriate replacement.

A faulty door lock can be a major pain, not to mention a significant security risk. Locks on uPVC doors are more prone to malfunction, which is why it is crucial to check them on a regular basis. In fact, experts recommend that you change your locks every seven years. If your lock is severely damaged or you aren't satisfied with its performance, a professional's assistance might be worthwhile.

For uPVC, a simple pin system called the euro cylinder will be utilized in the majority of cases. They are easy to use and seldom break down, but are still vulnerable. As a result, it's worth replacing the lock's cylinder by one that is more modern and has anti-snap and anti-bump protection to guard against burglary.

The first step to changing your uPVC locks is to take off the handle. This will expose the old cylinder. This can be difficult as there are typically some screws hidden underneath the handles, so make sure you have a screwdriver handy. The next step is to gently pull and wiggle the cylinder until you loosen it. When it does then, you can take it from its socket.

Once you've found a suitable replacement, it's just the matter of screwing it into place and then reverse the removal procedure. Do not tighten the lock too much as this can cause the cylinder in the door to become stuck and stop working as it should. Once everything is in place you can test the uPVC door lock by opening and closing it from both sides. It should be able to lock and unlock the door with your key. If not, make sure the screws are tightened and try again.

Install the Lock

You'll need to conduct a bit of research first to make sure that the lock you choose is appropriate for your door. You'll have to know the backset and faceplate measurements - that's the distance from the edge of the door to the center of the handle or cylinder - and the type of lock to ensure that the lock is properly fitted without any compromise in security.

After you've completed this, it's time to install the new lock. It is best to prop the door open or lock it so that it doesn't shut during the installation process. To begin, use a Phillips head driver to loosen the screws holding the handle in place. After the screws are removed then you can slide the inside handle and outer handle apart.

You can now remove the old cylinder using a screwdriver. it. After removing the cylinder install the replacement lock. Make sure to adhere to the guidelines that are specific to your particular model. Once the lock is in place you can test the new lock by opening and closing the door from both the outside and inside, locking and unlocking it from the inside and testing it again.

There are a variety of reasons why you might need to change the locks on your uPVC door. You may have just moved in and not had an entry key. The previous tenant may not have returned the key. You might also want to upgrade your lock to one that is more secure. It shouldn't take more than five minutes to replace the lock's cylinder.

No matter if your uPVC doors are equipped with multipoint or single-point locks, they all have the same basic mechanism. This means that they can be prone to problems occasionally like not being able to close or becoming stuck. upvc door locks replacement hammersmith repairmywindowsanddoors are caused by weather conditions, wear and tear, or just the normal use. The majority of these issues can be easily corrected with a little maintenance or by contacting a locksmith.

Member since: Thursday, November 28, 2024

https://www.repairmywindowsanddoors.co.uk/hammersmith-door-locks-replacement-near-me/