Armstrong User

UPVC Door Lock Replacement

UPVC doors are a fantastic security measure against burglaries. They do have some limitations, but these can be overcome with the installation of deadlocks.

If your uPVC front door lock is loose or sloppy, it could be time to replace the lock's barrel. This easy DIY project will enhance the security of your home and improve its appearance.

Take out the lock cylinder from the old lock.

If you're finding that your front door is fragile when you lock it or that the key is struggling to turn, you may have a damaged lock cylinder. Replacing it will ensure smooth operation and reinforce security. The procedure is fairly easy and should take about 30 minutes. You'll only need a screwdriver. Open your door and check the door's edge near the lock the cylinder. There should be a screw that is roughly parallel to the bottom part of the cylinder. Remove it using a screwdriver, and store it safely.

You'll have to know the dimensions of the cylinder you have in place so you can find an appropriate replacement. The sizes generally vary from 60mm up to 110mm. To determine the size of the lock, you will need to remove the screw from the faceplate. You can also turn the lock handle while the cylinder is in place to measure the amount it is moving.

The next step is to determine the cylinder's diameter and length of the cylinder cam. These measurements are crucial to making sure that the lock you choose will fit the existing door. Depending on the type of uPVC door, these dimensions will differ. You'll need to select an alternative that is similar or slightly larger than the existing cylinder.

Once you have the measurements and measurements, it's time for you to remove the old cylinder from the door. It's a simple task but you need to perform it properly to avoid damaging your door or frame. Make sure that the door is secured or propped up so that it won't shut between steps.

A professional locksmith is a good choice if you aren't sure how to do it yourself. They can provide expert advice, flawless execution, and peace of mind. They can also help you choose a safe and secure locking system. However, DIY has its perks, including saving cash and learning new skills. You only need a little patience and the right tools, such as a Phillips Screwdriver. front door locks replacement andover repairmywindowsanddoors 's not as difficult as you think to change the locks on your uPVC locks.

Installing the new lock cylinder

It is essential to follow the correct procedure and make sure you use the correct measurements when replacing locks at your front door. This will not only help you avoid problems in the future but it will keep your home safe and allow you to use keys for both sides of the door. When replacing your uPVC lock, you must take measurements of the length overall and the backset as well as the cylinder's diameter. These measurements will ensure that the new lock cylinder fits into the uPVC frame and functions correctly without gaps or security issues.


The first step is to remove the handle from the door by loosening it with an screwdriver. The next step is to take off the barrel screw holding the lock cylinder. Next, you can remove the old lock cylinder by inserting a lock key into the cylinder and turning it both to the left and right. It is possible to remove the cylinder when the key is in one of these positions.

Installing the new cylinder on the front of the door is straightforward. You can follow the same steps you used to remove the old one. However, you must be aware that the new cylinder won't fit in the area where the old one was. The cylinder must be aligned correctly in order to be locked and shut using keys. It is important to ensure that the cylinder is in the center and has an elongated keyway.

It isn't difficult to install the latest uPVC door lock, but you must be cautious not to harm the door's frames or handles. If you are unsure about your ability to finish this project, hire an expert who is Checkatrade approved and has experience with these kinds of doors. A locksmith can save you time and money by completing the task quickly.

Reattaching the door handle

You may decide to upgrade your lock on your front entrance for several reasons. You might have lost the lock key, the previous tenant has not returned keys, or you would like to upgrade to a more secure lock. Changing the lock barrel on a uPVC door is an easy job that can be done in just five minutes. You'll need an Phillips head screwdriver, a new lock cylinder and a spare key for the barrel (if you're planning to use one). Make sure the door is opened or secured in a secure way so that it doesn't close during the process.

There could be some issues with changing the uPVC front door lock mechanism, but they are not as difficult to resolve as you think. It is important to begin by determining the type of lock you have installed on your front door and the size you'll need for your replacement. For older doors, there are strip locks and multipoint lock options. It's much easier to replace your uPVC door lock if you know the brand and model it's.

After replacing the cylinder you will need to connect the handle. First, you'll need loosen the set screw on the shaft of the handle using the help of a screwdriver or an Allen key. This will permit you to remove the handle and expose the shaft of the spindle. If the shaft is threaded you'll need to loosen it a little and back it up with a screwdriver in order to ensure a proper fit.

After you've tightened the screws on the new handle and the lock cylinder, it's time to test the lock. Check that the key fits and turns easily, and that the lock mechanism is functioning properly. If you don't feel comfortable doing this yourself, a locksmith can do the job for you.

It's also important to note that uPVC door handles and lock mechanisms require regular oiling to keep their functionality. This is particularly true in areas with high wear and tears like those that are often used, or shut and locked. A little bit of lubricant will go a long ways towards ensuring that they function properly and prolong their life.

Testing the new lock

A lock made of upvc is an essential element in the security of your home. However, like every other device it will wear out over time or be compromised. The key to a functional uPVC lock is regular maintenance. This will prevent malfunctions from occurring and can compromise your home's security. The best method to accomplish this is by lubricating the internal mechanisms using an approved lubricant every six months. This will stop the lock from rusting and causing damage.

You can use a silicon spray in addition to regular lubricant to loosen the keyway. This makes it easier to insert keys. This is a simple DIY solution that will save you money in the long in the long. Make sure you don't apply WD-40 as it can leave a residue of oil behind that could damage the lock.

It is important to test the new cylinder after installation before you can be sure that it will function correctly. This can be done by testing the handle from both the inside and outside of the door. You can now put the handles back in place and then re-insert the spindle screws to ensure everything is in place. Replace all the screws that were holding the handles in place. Give yourself a pat on the back for a good job!

A locksmith can add additional features to improve the security of your home, for example door chains or sash jammers. They can help you select the most appropriate locks for your house. A professional can also help you determine the ideal size of cylinder for your doors. This is crucial because a wrong lock can compromise security.

The costs associated with replacing a uPVC door lock can vary depending on the kind of lock you select and the number of doors in need of replacement. The cost for a professional locksmith will vary from PS75 to PS100 per hour, but the price will vary based on the location you live in and the kind of lock you require. Check out locksmith prices before selecting a company.

Member since: Wednesday, November 27, 2024

https://www.repairmywindowsanddoors.co.uk/andover-door-locks-replacement-near-me/