Drew User

How to Do a Broken Car Key Repair

You're in a rush to get to work and jam your keys into the ignition. You try turning the key, but it snaps in the lock.

Luckily, there are a few ways you can attempt to fix it before calling a locksmith. Here are some quick fixes:: 1. Super Glue.

1. Call a Locksmith

A broken key in the lock is among the most frustrating things a car owner could face. This is especially frustrating if it occurs while the driver is hurrying to get to work or to drop off the child. In this situation it is essential to act swiftly and try to release the stuck key.

It is recommended to contact an experienced locksmith for this job as they will be able to use the appropriate tools to remove the broken key without cause damage to the lock. Many people are looking for something thin and stiff such as a toothpick or paperclip. However it is not the best solution as they are too heavy to fit inside the lock.

A much better solution is to look for a pair of tweezers because they are thin and can easily get into the key hole inside the lock. They should also be sturdy enough to grasp the broken part of the key and remove it. If you don't own tweezers then you might consider trying to locate a set of key extractors that are often found in auto parts stores. They are thin, flat and have small hooks. They can be inserted through the keyhole to grab the broken part of the key.

Another possible solution is to find an magnetic key hook that can be affixed to the metal inside the lock and pull it out. This is not always the best option, as it can sometimes be caught in the lock and cause further damage to it. In such a situation it is recommended to contact a locksmith.

Some people try to join the two pieces of a broken car key with superglue in order to get it out of the lock. However, this can be very risky as the bits of metal could stick to one another and break apart later. It is also essential not to turn the key, because this could cause damage to the lock or ignition cylinder. It is best to contact a professional locksmith who will be able to remove the broken key and create an immediate replacement.

2. Drill a hole

Sometimes a key breaks inside the lock, and even if you have an extra key, you may not be able to gain access to your vehicle. Visit Homepage may be the best option in these situations.


It is important to make sure that the keyhole is set for a basic tumbler key. If it's not there, you won't be able to drill out the pins and damage the door or internal lock mechanism.

It is also important to be aware that you will be drilling through the outer layer of plastic and the inner metal layer. You can drill through these layers with tiny drill bits, but you should not go deeper. If you drill too deeply, it could damage the internal wiring harness or cause the drill bit to stick inside the hole.

It is also recommended to wear a mask and protective equipment when working with drills. This will stop dust and dirt from getting into your lungs.

In broken car key repair , it's recommended to have two pairs of pliers and tweezers available in case the damaged piece of the key is sticking out of the lock. If the key is protruding enough to be able to be grasped with pliers and tweezers this is enough to pull it out. If not, you'll need to use a tool like this to wedge it into the lock and then turn it towards the key to grab and pull it out.

3. Drill a nail

If you break your car key in half, it can cause you to be trapped. Luckily, there are a few methods to fix it without paying for a locksmith. The first method is to make use of a screw or nail. You can find these in your house or at the hardware store. It is best to choose nails that are as thin and long as you can. You can then insert it into the hole, and then use epoxy glue to join the two pieces together. It is also good to ensure that the nail's back is flat. This will allow it to fit into the slot in the key. This will prevent it from moving and potentially breaking again in the future.

4. Super Glue

A lot of motorists make use of DIY hacks such as using super glue to attempt to fix a damaged car key, but this is a risky option to make. You could cause damage to the lock, and then have to pay more money to get a new one.

You need to check the keys that have been damaged first and make sure they are the same size. This is crucial to ensure that all the pieces of the glue are aligned properly and that the key will fit in the lock after they've been put in place. Then, use a piece of sandpaper with fine-grit or a metal file to smooth the edges on the damaged pieces of the key. This will make the glue stick better and lessen the risk of a loose key in the future.

After you have polished the edges of the damaged key and polished them, apply a small amount of super glue to one of the ends. Be careful not to apply too much, as this could cause the key to become too heavy and it will be difficult to fit into the lock. Then, carefully align the two broken pieces of the key and press them together. After a few seconds, the glue will start to set and bond the key fragments together.

Another household item that can be used to help to remove a damaged car key is a bobby pin, which can be shaped into a pick-like tool and put into the lock. This method is particularly useful if the break is near or inside the keyway or ignition lock hole.

A car key that has been damaged with electronic components will require an entirely new key from the dealer or a professional locksmith. The key must be reprogrammed using a new code, and the chip inside the key will need to be changed. If only the shell or metal part of the key breaks, you will need to get a new cut. It is not necessary to reprogramme or replace the electronics.

Member since: Monday, October 28, 2024

Website: https://bennett-mcconnell-2.blogbright.net/10-easy-steps-to-start-your-own-car-key-button-repair-business