Burris User

UPVC Door Handles Replacement Guide

Once you have the right measurements, replacing the upvc door handles is a straightforward DIY project. These measurements include the distance between the handle's backplate fixing centres (sometimes referred to as PZ) and the center of the key hole.

The most popular uPVC handle is two inline levers. One inside and one external, joined with a spindle. They operate the multipoint lock that is found on uPVC and aluminium doors and also on some wooden ones.

Brands & finishes

A damaged uPVC handle is more than just a minor inconvenience. It can also leave your home vulnerable to burglars who could force the lock open and gain entry to your property. It is imperative to act when you notice your uPVC handles are breaking down.


Fortunately, it is quite simple to replace your uPVC door handles. You will only need some tools and a few accurate measurements. In the majority of cases, you'll simply put in your new uPVC handle and you're good to go. However, it's recommended to search for the top quality locks and handles that are up to the highest security standards.

You can select from a wide range of uPVC handles. There are many different types of handles, including lever/lever handles pad handles, offset handles and snib handles. Lever/lever handles are very popular with homeowners and consist of two movable inline handles. Pad uPVC handles are smaller and come with an offset design. This allows you to secure the outside of your home after entry.

A uPVC offset handle is made up of two pads that are fixed, and the other moveable. This type handle is generally used on sliding patio doors. Snib handles are like offset handles but can be used on uPVC french doors.

It's important to consider the style of your existing windows and doors when selecting a replacement uPVC handle. The handle must match your doors' existing ones in terms of colour and style. Certain handles are available with a variety of finishes such as black and white and others are available with more fashionable options such as gold or chrome.

It is important to make sure that you get your screw-to-screw as well as PZ measurements correct when taking your measurements. The PZ measurement is the distance from the center of the hole in the spindle to the centre of the keyhole. The screw-to-screw dimension represents the distance from the screw hole of your existing handle to the closest screw in your door frame. It is essential to measure it accurately to locate an appropriate replacement.

Measurement and Fitting

The uPVC handle is fitted with two levers, one on each side of the lock mechanism that make it easy to operate both from inside and out. Providing a comfortable grip and easy-to-use functionality, the handles are also an important part of the door's security mechanisms. With the right uPVC handles, you'll be able to keep your door secure and look stunning at the same.

It can be difficult to choose the right uPVC handles because there are a variety of sizes, shapes and styles available. When selecting the right handle replacement for your uPVC door, you must be aware of three crucial dimensions. upvc door handle replacement bognor-regis fixing centre keyhole and lever dimensions, as well as the spindle's diameter are all important measurements. By taking into account these aspects, you will ensure that the new handle is perfectly matched to your uPVC doors and ensures an ideal fit.

It's easy to measure these points but you need to be as precise as you can. If you're not careful you might end with an unfit handle that doesn't fit the existing one and can cause problems when opening your uPVC door. The top screw located at the center of the backplate is the most crucial measurement. This is commonly known as the PZ dimension. This is measured from the pivot point of the keyhole or lever for the handle to the centre of the screw. Generally speaking it is an measurement of 92mm however it may vary.

You should also check that your uPVC door handles have the number of keyspindles required to operate your multi-point locking system. Idealy, they should be in line with the number of keys you use to lock or unlock your uPVC door. Some older doors may have a single spindle to operate the lock, but more modern doors will feature two spindles, allowing for independent operation from inside and out.

You shouldn't have a sliding uPVC handle, as this can put an excessive strain on the locking mechanism. This could result in broken parts. Try to find uPVC handles with spring cassettes built in to prevent this. These aren't just aesthetically pleasing but they reduce the operating pressure on the door locking mechanism and can prolong its lifespan.

Broken Spring Cassettes

When a door handle becomes stiff, it could be caused by a problem within the tubular latch itself. This is usually a straightforward fix that can be solved by repositioning the fixing plates of the replacement handle. First take the door off and ensure that there are no obvious obstructions to the latch plate such as loose screws or indications of internal parts peeking through. If this isn't the situation, it's likely to be one of the spring cassettes in your uPVC handle which may need to be relocated.

The simplest way to do this is to buy a door handle repair kit. It will include all the tools needed to remove the handles and then move their cassettes. Follow the instructions to do this and you'll soon have a sagging or sliding uPVC door handle that's again fully operational.

A floppy uPVC handle could be caused by thermal contraction but it is more common to signify that the gearbox is damaged. This isn't an issue that you can fix yourself. You'll require the assistance of a locksmith.

It is essential to choose a genuine replacement gearbox to your uPVC doors. This will ensure that everything is properly installed. Using a cheaper aftermarket part may lead to problems such as a faulty multipoint lock and reduced security for your home.

You can also replace the entire uPVC lock and handle mechanism. This will not only fix the issue of sagging, but also ensure that your handle is fully functional and secure. This is not a cheap or quick solution. It requires the removal of your old uPVC handles and replacing them with a brand new one. It's also worth mentioning that this is only suitable for those with an sprung-handled double glazing door as the door will have to be repaired. You can also buy a set of handles with springs that are built in. This will save you time and money.

Can I put a uPVC Door Handle to an Aluminium or Timber Door?

When you are choosing doors for your home there are many factors to consider. Doors made of aluminum are modern and stylish while uPVC is durable, energy efficiency, and security. Regarding the design of the door you're planning to install the appropriate handle is crucial. Whether you want to replace your old handles or add new ones, it is important that you choose the appropriate one for your property. Our uPVC door handle replacement guide will help you make the best decision and install them with confidence.

The process of changing a uPVC handle is fairly simple and only requires basic tools. First, you'll have to take off the old handle. This can be done by removing the screws that hold it in place using the screwdriver. Once the screws have been removed, you can simply pull the handle away from the door.

The next step is to determine the size of the door handle. You'll need to determine the centre of the fixing holes on the backplate. This is often called PZ measurement. It is used to determine the size of the handle spindle. If you are aware of this information, you will be able to buy an alternative door handle that is of the correct size.

There are several different types of uPVC door handle available to satisfy your individual needs. Some of these are designed to provide extra security features such as anti-drill, cylinder guards and mole grips. These uPVC handle designs are able to be installed on uPVC, aluminium and wooden doors, and are perfect for homeowners who want to increase security for their home.

If you are seeking a more traditional uPVC handle There are other options to suit your taste. These are available in a variety of finishes, including black, gold, and chrome. These handles are typically a little bit more expensive than the standard ones, but they will provide a beautiful appearance to your door.

It is essential to verify the dimensions of your selected uPVC handle prior to placing an order. You will need to take the measurements above including the key hole and lever dimension, and backplate fixing centers to ensure that the new handle is a suitable fit for your door.

Member since: Sunday, November 24, 2024

Website: https://www.repairmywindowsanddoors.co.uk/bognor-regis-door-handle-repairs-near-me/