The email you entered is already receiving Daily Bits Emails!
Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser The revolutionary Ghost immobiliser shields your pride and joy from key-long and relay theft. Your car won't start in the event that someone doesn't have your PIN code. Transport Mode allows you to temporarily disable the device, which is perfect for vehicle transport and servicing. It then reactivates by entering a pin code again. No Key Fobs or Led Indicators The Ghost 2 immobiliser is a technological breakthrough in the field of automotive security and provides a solid defense against the latest techniques of car theft. Its unrecognizable installation and engine start blocking will reduce the risk of your vehicle being stolen, which can give you peace of mind, and may even reduce insurance premiums. It doesn't emit radio frequency signals, making it inaccessible to traditional scanners. It is also not hacked using common methods such as key cloning and signal jamming. The device makes use of buttons in your vehicle, such as those on the steering wheel or door panels, to create an unique PIN number which can be changed. The sequence can be as long as 20 presses. Only the owner of the vehicle will be able to start the engine when the correct sequence or a beacon or mobile app is utilized. This provides an extra layer of protection against thieves. You can also turn on an easy service mode for situations such as valet parking or maintenance that require you to temporarily disable the system. The mobile app makes it easy to do this, and ensures that your vehicle is protected when it is being serviced. Once the job is completed, it is easy to switch back to secure mode. This will ensure that your vehicle is protected at all time. The Ghost 2 is far more convenient to use than other systems that require a fob. The app also functions as a spare key for emergencies, allowing you to drive with the security turned off without having to enter your PIN code. No Radio Frequency Signals The Ghost 2 immobiliser is not like traditional security systems, which require an additional remote control. It can be controlled using the existing buttons on the console or steering wheel. The device is unnoticeable by thieves using the RF scanning technology or code grabbing, so your car will not start for them in the event that they get your key. The device employs an exclusive 'password' sequence of buttons that locks the engine. This PIN code is entered either on the app, or by using the buttons on the steering column or the center console. This lets you lock the gear-box too, meaning your car cannot be driven away unless you have a key in your possession or are capable of entering your pin code. The device can be set to transport mode, allowing you to drive your vehicle without entering the pin code. This provides your vehicle with extra protection when it's used to valet or service parking. The Ghost 2 immobiliser was designed to be as subtle as possible, making it a great theft deterrent. This is a great choice for those who have invested a lot on customising their vehicles or own expensive or rare cars. Many people have testified that this is a great method to safeguard their vehicles from being stolen and some have even shared stories of attempted thefts that were stopped by the device. The Ghost 2 is also very versatile. Users have reported that it can be used with regular keys and with the emergency button on their car, giving them peace-of-mind when they're away from their car. No Radio Frequency Scanners Secure your vehicle from key cloning, hacking and theft by installing the Ghost immobiliser. The system makes use of the buttons inside your vehicle, for example those on the dashboard and your steering wheel, to create a unique, programmable button sequence that only you can identify. Without this sequence, your car cannot start. The combination of a distinct disarm sequence and the absence of radio frequency signals makes it extremely hard to attack or evade. The Ghost CAN Immobiliser is a better alternative to devices that are approved by Thatcham that rely on radio frequencies scanning. It works completely silently and without external signals and doesn't depend on any external signals. It's a safer option and is insured if installed by a TASSA-approved installer (we are one of them!) ). It is highly recommended that you hire a professional installer install the Ghost immobiliser. This is due to the way it is integrated into the vehicle. This ensures that it's integrated seamlessly with the vehicle's systems, resulting in maximum performance and a considerably less chance of failure. Professional installation is often with warranties and support to increase the value of your purchase. This is a significant deterrent for would-be thieves, who are less likely to make any attempts at bypassing the device because of its security features and expert installation. The Ghost is not only an effective deterrent to thieves, but it's designed to be simple to use. It is able to automatically re-arm after a certain amount of time, so you don't have to remember your PIN code each time you park your vehicle. It also has a Service/Valet mode for those who want to take your car for valet parking or for servicing. It can be activated and deactivated by a simple indicator sequence. No Wire Cutting The Ghost 2 does not require cutting any wires from your car in order to install it, ensuring a the non-invasive integration of the original systems of your vehicle. It connects to your vehicle's CAN data network and is programmed with a unique PIN which prevents other people from starting your engine if they do not have a unique PIN sequence or app authorisation. It's also silent, as it does not emit radio signals like some other immobilisers. It's weatherproof, sealed and tiny enough to be hidden anywhere in the vehicle, making it nearly impossible to spot. The Ghost II also has the capability to be put into 'transport mode, which allows it to be used for short periods of time without the requirement of a personal PIN. This is great for situations like loaning the car to someone in the family or a friend or in emergencies which allows you to start your car and leave quickly and safely. It's important that you work in a well lit area when installing the Ghost II. You should also wear safety gear while working with electrical components and tools. A basic set will allow you make precise connections. A multimeter will allow you to determine electrical values and make sure that your wiring is safe. Cable tie and insulation tape can be used to cover any exposed or cut wires or to join them during the installation. It is essential to disconnect the battery of your vehicle before beginning any wiring work. This will stop any airbag deployments that happen accidentally or electrical shocks from occurring if the battery is disconnected while the Ghost II is still connected to the vehicle's system. Easy to Install The Ghost immobiliser is an exclusive next-generation device that operates by connecting directly to the vehicles CAN Data Network and using an individual PIN Code to stop your car from starting. This makes it more difficult to crack than traditional alarm systems, or aftermarket key fobs, and provides superior security against key cloning hacking as well as relay attacks. The device can be hidden in your vehicle, and it uses the buttons on your dashboard and steering wheel to create a unique sequence that you are the only one to know. This prevents thieves from being able make use of a duplicate key to start your vehicle. It also prevents them from using a diagnostic tool that thrives on hacking into the OBD. Installation is simple and requires no cutting of wires. The unit is connected to the vehicle's CAN bus through an unchanging 12V supply as well as a grounding connection. Hand tools are all you need for installation, and a multimeter will help with pinpointing the correct wires. To protect the connections from damage, insulation tape or heat shrink tubes are recommended. Cable ties can also be used to keep the wiring neat. Once installed the unit is in a learning mode, and records your specific sequences and buttons to create your unique pin code. The information is stored in the CAN data network, making it nearly impossible for anyone else to duplicate the sequence and start your vehicle. Should you ever forget your PIN Code, sell your car or the button becomes inoperative, there is an emergency override feature known as Transport Mode. This will shut down the Ghost System completely, however it will reactivate itself automatically when you exceed 31mph for longer than 15 minutes or enter your PIN Code. This is ideal for those who rent their vehicles out regularly on services like Turo or ZipCar.
Member since: Thursday, December 5, 2024
https://morphomics.science/wiki/20_Trailblazers_Setting_The_Standard_In_Ghost_2_Immobiliser_Fitting_Near_Me
