Davidson User

How to Replace a UPVC Door Replacement Lock

If the lock on your door is jammed or isn't functioning in the way it should, you might want to replace it. It may seem like a complicated process but it is actually quite straightforward and doesn't require an expert locksmith.

A few tools of the trade along with a bit of patience and a lot of care will be enough to get the job done. Here's how you do it:

Measure the Door

If you're struggling to lock your uPVC door or it isn't closing or lock properly, it may be time for a replacement. If you've just moved into a new home, a tenant left without returning keys, or if your multipoint gearbox is showing signs wear and tear, switching the barrel of your lock to an alternative one will give you an extra layer of security.

Before purchasing a new lock, you'll need to take key measurements to ensure the new cylinder is properly fitted and won't affect your security at home. The backset is the most crucial. It is the distance between the middle of your keyhole bore hole to the edge of your door. It's usually around 2 3/8 or 2 3/4 inches. Use a measuring tape or ruler to measure this and record the results on a piece of paper or notepad.

You will also need to know what the faceplate thickness is. This is the size at which is used to cover the lock mechanism. If you can, purchase a replacement lock from the same manufacturer, as these will be manufactured to the same dimensions. If you are unable to locate the manufacturers name or mark, simply determine the width of your existing cylinder. You can also determine the width of the existing cylinder by putting a pencil in the keyhole.

Once you have the dimensions you can begin to remove the old cylinder. Start by loosening the screw holding the handle in place using the Phillips-head driver, and then loosen the screws that connect the handles on the exterior and interior to each other. After you have removed these screws, you can take off the barrel screw on the handle's exterior to remove the cylinder.

If upvc door locks replacement is stuck inside the lock, try using WD-40 or other lubricant to help you pull it out. It is essential not to push it out. Forceful turns can damage your lock's internal gearbox. You may also want to think about upgrading to a lock that has anti-snap and anti bump protection, which is much more secure against attacks by thieves.

Source the Lock

When buying the latest door lock, you need to consider a few aspects. Make sure you've got the proper size of cylinder that will fit your door and that you're buying from a reputable brand to ensure a perfect fit and quality. You'll need some basic tools to complete the task, including an screwdriver as well as a mallet made of rubber.

There are a variety of signs that your lock made of upvc is worn out and needs to be replaced. The lock could have visible damage or the handle may be loose and not fit correctly. If the lock starts jamming or isn't locking at all it's time to think about a replacement.

Making sure the lock is installed correctly is essential once you've selected the correct one. This will ensure that it locks and operates properly. Follow the manufacturer's directions when installing the multipoint lock mechanism into the upvc panel. Install the correct faceplates, handles and other parts. Test the mechanism by locking the door and unlocking it from the inside and outside. If everything looks good you're ready to celebrate your accomplishment.

It may seem difficult to change the lock on a upvc but you can do it yourself with the assistance of a locksmith. By recognizing the indications that your lock is ready to be replaced and having the right tools to hand it's relatively easy to complete.

Keep in mind that just like any other moving part that a door lock made of upvc will benefit from some lubrication to ensure it runs smoothly. A few sprays of graphite powder can extend their lifespan by reducing excessive friction. Regular cleaning of your door lock mechanisms with WD-40 and a damp cloth can help to keep them in great condition.

Take out the Cylinder

If you're having difficulty with your doors made of upvc and windows, it could be time to change the barrel of your lock. This is a straightforward DIY project and can be completed in only several minutes. It's an effective method to ensure the security of your home. This requires you to identify the manufacturer of the lock to find a suitable replacement.

A faulty door lock can be a real pain, not to mention a significant security risk. Locks on uPVC door are prone to malfunction, and it's important that you maintain them on a regular basis. Experts recommend replacing your lock every seven to eight years. If your lock is seriously damaged or you aren't satisfied with its performance, expert assistance might be worthwhile.

For uPVC it is a pin system, referred to as a euro cylinder will be employed in most instances. They are simple to use and are not likely to fail, but they can be vulnerable. It's therefore worth replacing your lock with a modern model that has anti-snap and anti-bump security to stop burglaries.

The first step in changing your uPVC locks is to take off the handle. This will expose the old cylinder. This can be difficult as there are typically several screws concealed beneath the handles, so make sure you have a screwdriver in your bag. You'll then want to gently pull and wiggle the cylinder until it loosens. Once it does, you can remove it from its socket.

If you find the right replacement you can simply screw it in and reverse the removal process. It is important not to overtighten the lock as this can cause the cylinder in the door to get stuck and stop functioning as it should. Test the uPVC replacement lock by opening and closing it from inside and outside. You should now be capable of locking and unlocking it using your key! If not, ensure that the screws are tight and try again.

Install the Lock

You'll need to conduct some research first to ensure that the lock you select is the right one for your door. You'll be required to be aware of your faceplate and backset dimensions which is the distance between the edge of the front door and the centre of the handle/cylinder - along with the lock type to ensure that the lock fits correctly without compromising security.

Once you've done that, you can begin installing the new lock. It is recommended to prop the door open or secure it to ensure that it doesn't shut during the process. To begin, use a Phillips head driver to loosen the screws holding the handle in place. Once the screws are removed then you can slide the inside handle and the outside handle apart.


You can now take out the old cylinder using a screwdriver. it. After you've removed the cylinder then you'll be able to install the new lock, ensuring that you follow the instructions for your specific model. After the lock has been installed you can test it by opening and shutting the door from both the inside as well as the outside, and locking and unlocking it from the inside, and then testing it again.

There are a number of reasons to consider to change the locks on your uPVC door. You may have just moved in and not had keys. The previous tenant might not have returned it. You might also need to upgrade your lock to one that is more secure. Whatever the reason, changing the lock cylinder is straightforward and should only take about five minutes.

Whether you have a multipoint lock or a single-point lock, they both operate with the same basic mechanism. They may have issues with the lock, for instance, a failure to close or jam. These issues are caused by weather conditions, wear and tear, or simply the use of everyday. The majority of these issues can be easily solved with a bit of maintenance or hiring a locksmith.

Member since: Saturday, November 30, 2024

Website: https://www.repairmywindowsanddoors.co.uk/greenwich-door-locks-replacement-near-me/