Choate User

Choosing the Right UPVC Door Handle Replacement

It's easy to replace your upvc handles, but choosing the right handle can be a challenge. Most modern double glazed handles have spring cassettes built into them but older ones don't.

If the handle made of upvc on the multipoint lock is loose and floppy, it could be an internal issue. This article will cover the various possible issues & their causes.

Handles that slide or loosen

uPVC handles are susceptible to wear and tear. This is especially true in older properties. The most common reason that a handle becomes floppy is because of a broken spring cassette inside the door lever. This is usually due to an excessive force and the square spindle which holds the cassette can become displaced or rounded off.

The good news is that a uPVC door handle replacement is a relatively simple job and can be completed within a couple of minutes. The first step is to remove the handle unit that was previously installed by removing the fixing screws visible on the side of the lever plate. After the handles have been removed, you can take them off and replace the cassette.

Online you can choose from a range of uPVC handles, many of which come with different finishes. Choosing the right finish will determine how long your handle will last and how it is easy to keep clean. Finishes such as PVD, Stainless Steel or Resista are designed to withstand corrosion and will last up to 25 years.

Once you've selected the color or style, you can then choose the type of handle you need. The most popular are pad and lever arrangements. Lever pads are commonly used to stop access from unauthorised people. They are equipped with both a lever inside and a paddle outside.

Next, measure and note the dimensions of the handle you currently have. You will need to know the PZ dimension (the distance from the screw hole to the center of the lever) and the length of the handle and the size of the keyhole. Once you have the measurements you can compare them to the handle size matrix to find the correct replacement.

Broken springs

Over time, the handles of uPVC doors can get loose or wobbly and occasionally the spring cassette inside could break. These springs help make sure that the lever of the handle is in a horizontal direction. Without them your doors will not lock properly.

Modern uPVC handles are designed with these cassettes integrated directly into the backplate. These springs are typically installed into older uPVC doors mechanisms. It is not something you can do yourself, but it's worthwhile to have your locksmith take a look as this could be the cause of the loosening of uPVC handles.

One of the most frequent issues with uPVC door handles is that they become loose or wobbly with time. This is usually due to worn out springs, which is an easy fix. This is usually caused by excessive handling of the handle. The square spindle of the handle will wear down and cause the springs to move.

To fix this, you will need to open the door towards the handle plate, then unwind all screws. This can be done using a Philips screwdriver. Once the screws have been removed the handle can be removed. The handle plates are then able to be gently removed. Then, you can remove the springs from the old ones and replace them with new ones.

This is a crucial point to remember when purchasing a replacement handle. This measurement is called the PZ and it is important to use a measuring tape that is calibrated for an accurate reading.

After reinstalling the springs, you will be able to operate the handle with no issues. However, it's always important to grease the internal mechanism to make sure that everything is working as it should do. This will not only ensure that your uPVC doors are as secure as possible but also makes them more comfortable to use for a long time.

Handles that slide around

Handles that slide around can be caused by a number of things, one of the most common causes is when the levers on the handle aren't aligned properly with lock. This is a problem that can occur with both uPVC and composite doors, but it is usually more noticeable on older doors since they are often made from less durable materials that don't stand up well to the elements.

A professional can fix this issue by re-aligning the handles to ensure that they are aligned with the lock. They will also look at the lock itself to determine what needs fixing. In many cases, a small adjustment to the handle springs is all that's needed to resolve this issue.

upvc door handle replacement leatherhead www.repairmywindowsanddoors.co.uk of your uPVC door handle is easy enough, but it's crucial to take the measurements of the handles you have in place to make sure you have the right size replacement. You'll need to determine the distance between the two screws, as well as the dimensions of the keyhole and lever, as well as the distance between them. You can then make use of this uPVC handles size guide to find the right replacement for your home.

Once you have the measurements, the next step is to eliminate the current uPVC handles. It is usually a simple procedure and requires only an screwdriver. Once the screws are removed, you are able to remove the handle and then move onto installing the new one.

It is important to secure the door using an appropriate wedge prior to beginning. This will prevent it from closing during your work. After you have removed the handle, you can now get to the inside of the door to fix the issues that cause it to sag.

A handyman from Fantastic Services will be able assist if you don't want to do the work yourself or lack the nerves. They will use specialist locksmith techniques to open the door without causing damage, and then replace the handle that is damaged, ensuring that everything is in place and functioning as it should be.

Damaged gearbox

A damaged gearbox may cause the door handle made of upvc to become stiff or lose its functionality. This could prevent the lock from being able to be opened using the use of a key. This is extremely dangerous and should be dealt with as soon as possible. It is essential to contact a locksmith if you cannot solve the issue yourself. They have the equipment and knowledge to complete the task correctly.

The first step is to remove the handle from the cover plate. This can be done using the help of a screwdriver with an angled tip. After you have removed the handle, you need to remove the middle screw that is holding the barrel. After you have removed the middle screw, you can then loosen the two screws that secure the barrel. Then you can pull the barrel from the door. You'll have to prop the door open to accomplish this, so make sure you have someone on hand to help.

After removing the cylinder, you can replace with a new cylinder. Make sure that the new cylinder is the exact size as your old one. Otherwise, you could end up with a handle that isn't aligned properly. This could cause numerous issues, including leaks and drips.


A lot of door handles made of upvc have slots for adjustment. These slots can be used to tighten or loosen the handle. The slots are typically located on the inside of the doors, close to the point where the handle joins the cylinder. The adjustment slots can be tightened by using an allen wrench. After you have made your adjustments then you can put the handle back in place and screw it in. Then, you can test the handle and ensure it works correctly.

The upvc door handle becoming floppy when closed is usually an indication that the gearbox or internal spring components have failed. This could cause the upvc multipoint lock to fail and leave your door open to intrusion. If this occurs, it is required to replace the upvc gearbox. The cost will range from PS145 to PS280, including labour.

Member since: Friday, November 22, 2024

https://www.repairmywindowsanddoors.co.uk/leatherhead-door-handle-repairs-near-me/