Ohlsen User

How to Do Your Own Door Lock Replacement

There are a variety of door locks and handles to fit the needs of every home. Some come with smart features that help you open the door, for example keyless entry or biometric recognition.

It's crucial to know the kind of lock you currently have before you install a new one. Check the back of your door's lock faceplate and note the brand.

How do you replace the lock on a door made of plastic

If you're constantly jamming the UPVC door handle, it may be the time to replace it. A floppy handle is frustrating and, more importantly, it can pose security risk.

The first thing you have to do is grab a screwdriver and remove the screw from underneath the barrel of your lock. It's usually longer than the other screws and aligned to the inner lock. If your lock cylinder has a fault you can fix it by inserting a lock key into the hole.

After removing the old cylinder, you are able to simply insert the new one. It is recommended to purchase locks from the same manufacturer as your old one. This will make it easier to replace it with a exact match. You can also lubricate the lock using a dry lubricant like graphite powder or PTFE, or lubricant once every six months to stop it from stiffening.

Tools required

Whether you need to replace a door lock made of plastic because of a damaged key or to make a simple repair that you need to make, you can do it yourself using the right tools. It is important to inspect the entire locking system to ensure that it's functioning properly and there's no stripped or loose screws. If you spot any, tighten them with a screwdriver, but be careful not to overtighten, as this can damage the mechanism.

Lubricating the lock mechanisms an excellent idea to prevent them from becoming stiff or unwieldy. This will help keep them in working condition for a longer time and improve their performance. It is essential to verify the power supply in the event that it is present. This will allow you to ensure that it is in good working order and that there aren't any electrical issues causing the lock to fail.

When replacing a door lock made of uPVC, it is essential to have the right tools available to complete the job quickly and effectively. These tools include a screwdriver and a pencil. Masking tape can be used to mark precise distances and measurements. This lets you accurately place the new lock. This is vital to ensure that the new lock is in alignment with the strike plate and that it functions smoothly.

It is also recommended that you use a pair of small pliers or tweezers to take off the lock. This will allow you to remove the pins without causing damage. If you can't remove the pins with the screwdriver, tweezers or graphite lubricant try a graphite based lubricant.

When installing the brand new uPVC lock it is crucial to follow all of the instructions provided by the manufacturer. It is recommended to talk to the manufacturer or dealer should you have any questions. It is also a good idea when you purchase replacement parts to bring any documentation. This will ensure that you have the correct parts for your specific lock. This will eliminate the burden of returning or replace damaged parts.

Measure the door

First, you must take measurements of the frame and door before you decide on a replacement. This will ensure that the new door is sized perfectly. You can measure both the height and width of the frame, either from outside or inside the home. A tape measure is the ideal tool for this job however, you can also use a ruler or a framing square. You will also need an eraser and a piece of paper to record the measurements. Also, you should have a photograph of the door to help you determine its features and measurements.

The process of measuring the door frame is like measuring windows. You'll need to measure the width and width three times, and then take the smallest of those measurements as the final measurement. To get the best measurements, remove hinges and handles from the door prior to you start taking measurements. Additionally, you should remove any brickmould or casing that overlaps the frame to avoid any incorrect measurements.

Once you have your measurements, you are able to start to take measurements of the door itself. Find what do you think of the door jamb from the floor. This will give you the height of the door, and you can use this number to determine whether your current hardware will fit in the new door.

It is also important to take measurements of the width of the door jamb that is the distance between the interior edge to the outside edge of the wall. This will provide you with the measurement of the thickness of the frame and should include any trim pieces or siding.

It is also important to take a measurement of the length of the door from the hinges to the top of the frame, and then from the hinges to the bottom of the frame. This will provide you with the width of the doors as well as the depth of the frame. Once you have these dimensions, you can then select the size of the door you want to install. In addition to the previous steps, you must also determine the distance between the frame and the wall, and this will give you the thickness of the frame.

Take off the lock that was previously used.

It is simple and fast to improve your home's security by replacing your door locks. Replace an old or damaged uPVC door lock to improve your home's security and provide you with peace of mind. This project can be completed with just a few tools and doesn't require any expertise.


The first step is to take off the old lock from the uPVC door. Unlock the door and take off the handle by loosening the screws with the help of a screwdriver. After the handle is removed, you can access the cylinder through a small hole on the edge of the door. If the lock's cylinder gets stuck spray it with WD-40 to loosen it.

Once the cylinder has been removed the handle can be replaced. Install the new handle and check it to make sure it is functioning properly. It is also recommended to replace the cylinder screws which could be damaged or lost during the removal. You can buy a new screw at your local hardware store.

You should take measurements of the key when replacing a cylinder, to make sure it fits in your door. These measurements include the length of the lock, the backset and the distance between the handle and the cylinder. Once you know the measurements, you can select the right cylinder for your door.

Installing the new cylinder lock is simple once you have the measurements. The process is easy and should not take longer than 30 minutes. If you experience any difficulties it is recommended to consult the lock manufacturer's instructions or consult an expert locksmith. This will ensure the installation is completed correctly and ensure that your uPVC is safe.

Member since: Thursday, November 28, 2024

https://www.repairmywindowsanddoors.co.uk/rayleigh-door-locks-replacement-near-me/