The email you entered is already receiving Daily Bits Emails!
Electric Fireplace Wall Hanging Ideas The wall-mount electric fireplaces are available to use right from the box. These fireplaces can be an excellent way to add the ambience of your home without the need for renovations or venting. However, they usually require care in installation due to the fact that they're typically heavy. Follow these steps to set up your new electric fireplace correctly. 1. Connect the Brackets A wall-mounted electric fireplace or recessed fire instantly transforms any space. This is an excellent option for those who don't have a fireplace or live in apartments. First, decide where you'll put your new electric fire. It's crucial to select an area that isn't susceptible to moisture and at least a few inches away from furniture, drapes, and other areas with a lot of traffic. Mark the wall with layout marks to indicate the top and bottom plates for the fireplace frame. Use a tool, such as an electric drill to drill exploratory holes into the wall, looking for studs using a stud detector and marking on the drywall for the locations of the fireplace mounting brackets. Then patch and paint the drywall or create a wall to prepare it for the fireplace installation. Depending on the fireplace mounted to the wall you select, you might require the installation of both the firebox and screen as one piece or separate them by using a wall bracket. If you are unsure of your ability to finish this project you can hire a general contractor or a seasoned carpenter. Most electric fireplaces come with an installation template to aid in the process, but you should also have a spirit level and a pencil handy to help you precisely mark the area where you'll attach the wall brackets. Utilize the template to ensure that the power cable of the fireplace is able to connect to an outlet nearby to connect it. Once the studs and the fireplace frame are in place, you can then install a drywall that is as seamless and flush as is possible to give a neat appearance. Install trim along the bottom edge, and then paint, sand and finish the frame. Most wall-mounted electric fires come with hooks or slots on the back of the unit, which you will insert into the slots or hooks on the mounting brackets. Make sure you make sure that the slots or hooks are aligned prior to connecting the fire brackets. Once the fire is set you can then add additional elements such as driftwood logs, crystal embers or decorative rocks. 2. Check the Bottom Bracket The space above the mantel, fireplace, or chimney breast is ideal to hang artwork. However, there's a line of distinction between an artistic arrangement and one that is distracting from the overall appearance of the fireplace design. A common rule of thumb is that a picture should not exceed at least 80% of the size of the mantel or fireplace it's placed on. This will help it remain proportionate and look aesthetically pleasing on the wall. Other decorative and ornamental items placed on the mantel can affect the size and proportional guidelines. If you're going to hang a photo above your electric fireplace, it's crucial that the frame is made of glass or other material that is able to withstand high temperatures. If you are unsure about the frame, you can test it frame with a heat sensitive cloth to determine if it is suitable for this application. The possibility of destroying artwork due to smoke or scattered heat is a common concern when you display artworks on a fireplace. This is not a problem with gas or wood-powered fireplace. However when you are planning to use an electric wall fireplace, it's important to check the instructions of the manufacturer. Most electrical fires have an attached bracket that can be fixed to the wall with either hanging screws or a wall-mounted fixing system. If the latter, it's recommended that you drill exploratory holes into an isolated area of the wall prior to you attempt to mount your electric fire. Then you can utilize an instrument to locate cables and pipes to check that there aren't any pipes or cables near the position you've chosen for mounting. If there are there are, you may choose to mount your fire over the electrical socket or move it to a different location. If you decide to move it, be sure that the power cable is able to reach the electrical socket. This is essential especially for older homes and those with walls that are solid. If you don't do this, the electric fireplace won't function properly. Certain models include a template that shows you where to drill holes for this purpose Some require a spirit level and pencil to mark the appropriate places on your wall. 3. Connect the Power Cord If you've installed a recessed electrical fireplace, you might need to move the plug socket from the wall to behind the fireplace. This can create a more elegant appearance. First test the fireplace to ensure it functions properly. The third way to mount an electric fireplace is by framing the space and constructing it into the wall. This gives it a finished, traditional look and allows you to include an additional mantel. The owner's manual for your particular model will give specifics on framing, wiring, and securing the fire place. The location of your electric fireplace on the wall with either a pencil or marker. Use a carpenter's level to make sure that the installation area is flat and level. You can use a studfinder mark the location so that you know that you're drilling in a safe area. Use the electric drill after having marked the installation location to create holes for the bracket screws or hanging screws. Follow the directions in the owner's manual for this step. This is especially important if you are installing the fireplace into the drywall. If you are unsure how to do it, you can ask an expert for assistance. A cable organizer kit can be used to conceal power cords. These kits typically include sleeves, clips, or boxes that can be used to bundle cables. You can use fish tape or wire snakes to guide the cords. If you don't want to cut into the drywall, a Powerbridge kit will provide a cleaner and more secure connection. Additionally, you can disguise the wires by painting them with paintable covers or by adhering them to the wall and skirting board. Make sure to keep the cover or tacks away from the heat source, however. This will protect the cord from damage and prevent accidental contact. 4. Connect the Adapter A wall-mounted electric fireplace is a great option for home renovations or for those who don't have the space or the money to build a gas fireplace. They are easy to hang and ready to use straight out of the box. They are an ideal choice to those looking for an elegant, modern design or warmth from a fireplace. These units can be put up on any wall, just like art, and are electric with fan-powered heat. It's a good idea create an inventory of all the equipment and tools you will require prior to starting the installation process. Read the user's manual to find specific details on how to mount your electric fire. Some models will require you to screw the brackets directly to the wall, while others may feature an adjustable mounting plate that slides into slots or hooks attached to the mounting brackets. If you are installing a recessed unit, it's important to make sure that all combustible materials are removed from around the installation area. In general the materials should be kept 3 feet from the front side of the fireplace and 1.5 feet from its sides. After you've checked all the parts, you should connect your electric fireplace and ensure that it is working correctly. white wall mounted electric fireplace is an important step to ensure that the flame effect screen and heater function in the way you intended. This will give you an idea of the final product's final state. Cover the cord once you are confident that it is working properly. This will keep the finished product neat. It is possible to achieve this by installing a new outlet that has an outlet cord that can be placed behind the unit. This will provide an elegant finish to your fireplace.
Member since: Tuesday, November 19, 2024
https://timeoftheworld.date/wiki/10_Things_You_Learned_In_Kindergarden_Thatll_Help_You_With_Wall_Mounted_Electric_Fires
