Vind User

Replacing Lock on uPVC Door

To replace the lock, you need to first take off the handle and screw holes. This is generally simple to do.

Then, find the screw that holds in the barrel of the lock. The screw is typically a different colour to the other screws, and is located on the edges of the lock faceplate.

Remove the Cylinder

To change the lock on your doors made of upvc first, you need to remove the existing cylinder. It is a straightforward process that can take about 30 minutes. All you need is an ordinary screwdriver. The Euro Cylinder screw is normally located on the inside edge of the door, right next to the lock cylinder. The screw should be easily identifiable since it's usually a different colour to the other screws. Remove the screw and store it in a safe place.

After the cylinder has been removed, you can start taking the handle off. To do this, open the door to allow full access to the inside edge of the door as well as the side of the lock faceplate.

Start by using a screwdriver to remove the screw fastening the handle to the door. Once the screw has been removed, you can pull the handle towards you and the rest out of the door.

If you have trouble removing the handle then you'll need to take off the screw that is holding it to the stud in the door frame. You can make use of a screwdriver to remove the handle. Be cautious not to pull or cross-thread it.

When you're ready for replacing the cylinder, make sure it is the right size for your door. Cylinders are measured based on two measurement points: (a) the distance from the center of the Fixing Screw hole to the bottom of the cylinder and (b) the distance between the keyhole and the edge of the lock plate.

Take the handle off

The good news is, the moment your upvc handle starts to become stiff, floppy, or loose, it's an easy repair. The cause is usually due to wear and tear on the cylinder or internal components of the multipoint lock which are inside the door between the handle and its frame. The weather, the heavy use or ageing can cause upvc locks to wear. This can cause issues with the locking and closing mechanisms of the door.

If the cylinder has worn, it will often be difficult to turn the key, and the lock can become stiff, causing the handle to loosen. The cylinder can be replaced, and it is a simple process. It is possible to do it yourself, although some knowledge of how the mechanism operates will be required. The first step is to unhook the handle that will allow you to access the cylindrical and replace it with a brand new one.

To accomplish this, you'll require a screwdriver and a tape measure. It is essential to know the exact measurements of the cylinder you have in place to ensure that you purchase a replacement that is suitable for. The cylinder is what permits you to lock the door of your upvc. It is important that you order an alternative that is identical in size.

To remove the old cylinder, you'll have to remove the screws that secure it. Be careful not to remove the screws, as this could make it difficult to remove them again in the future. After the screws have been removed, the cylinder should come out easily.

Take out the Lock Barrel

Upvc is a very durable material, designed to keep you and your family secure. They are available in a variety of styles and colors that will fit any style. They are also thermally efficient and maintenance-free. They do not come without a few disadvantages. Over time the locking point or barrel lock may become damaged and need to replaced. It's a simple procedure however there are some things you should know before you start.

To access the screw holding the lock cylinder, you'll have to take off your door handle. The screw is usually a different color from the other screws and can be located near the keyhole at the door's edge. Remove the screw and place it in a safe location. Slide the handles off both sides of the door. Do not hurry to do upvc window locks repair , as it could harm the uPVC.

After taking the handles off then, you can use a screwdriver to remove the screws that hold the handles to the door frame. This will allow you to gain access to the pins that hold the cylinder in place. You can then move the cylinder in order to see if this helps loosen it. When it does, pull it towards you, then pull it out of the socket.

After taking out the old lock cylinder it is essential to replace it with a brand new one that includes anti-snap protection as well as anti-bump. You can do this yourself if you have the right tools, or you can engage a professional locksmith to do it for you. It's a relatively simple task that will take about five minutes to complete.

Install the New Cylinder

A upvc door lock can be broken or damaged in a variety of ways. For instance, a tenant might have moved out and not returned the key, or the cylinder might be damaged and no longer works as it should. It is essential to select the right size replacement for your upvc door lock. If the wrong one is installed, your doors could be more vulnerable to the 'lock snapping technique that is responsible for 25% of burglaries.

It is important to install the right cylinder. The process is straightforward and takes just five minutes. To swap the cylinder and handle faceplate it is necessary to remove the screws attached to them.

Before you begin be sure that the handle is open and you have full access to the inside edging of the door and the side of the handle faceplate which holds the lock cylinder. This will enable you to easily remove the lock cylinder from the handle without having to move it, and expose the inside of the frame.

Then, remove the old cylinder and determine its measurements. It is important to know the length of the cylinder and the measurement of the cylinder which is used to lock or unlock the door. This will help you find a new cylinder that is the same or smaller. This is the most crucial part of the whole process. A cylinder must be flush with the backplate of the handle and have no more than 5mm from it.

Install the Handle

A upvc lock may jam if something breaks inside the case that controls the bolts which retract into the keep plate or strike. This is usually resolved by adjusting the Allan key under the hinges. However, this can occasionally cause excessive stress on the parts within the central casing, and it is best to contact an expert.


When changing the handle, it is crucial to have quick and easy access to both sides of the handle and having the proper tools. It is also a good idea to prop the door open so that it doesn't close during this procedure.

First, loosen the screws that hold the handle in position with the help of a screwdriver. After the screws are loose then you can remove the handle. After the handle and cylinder are removed, it's now time to put in the new handle. Make sure the new handle fits the existing cylinder center and cylinder. Check the length of the spindle on the lever that you have to determine this. Also, ensure that the screw fixing centres on the handle match the screw fixing centres on your current hole centre and cylinder.

The replacement handles offered by Fab and Fixed are available in a variety of styles and are built to last. They are ideal for those who want to upgrade their Upvc handles and increase their home security. Having the right handle will ensure that your home is secure and safe and will not be a target for thieves to break into.

Member since: Saturday, September 21, 2024

Website: https://www.repairmywindowsanddoors.co.uk/cheltenham-window-lock-repairs-near-me/