Dowling User

How to Choose a Smart Lock For Double Glazed Door

It's important to select the right lock that meets high standards of security when shopping for double door locks. This includes being SS312 diamond approved or at the very minimum Kitemarked TS007 3-Star which stops locking snapping.

Before you decide on a smartlock, make sure your doors are pre-drilled with boreholes. In the event that you don't, you might need to install an additional security measure such as hinge bolts.

uPVC Door Locks

The euro cylinder lock is typically found in the handles of uPVC door frames. It is connected to a multi-locking system. The issue with a lot of older or cheap uPVC doors is that the lock can be easily 'snapped which renders the multi-lock system ineffective and allowing intruders to gain entry to your home. The best quality uPVC doors should be fitted with an euro cylinder that is resistant to snapping and is more difficult to manipulate.

A multipoint lock is a popular choice for uPVC doors as it provides more security than a single lock with a cylinder. They typically have a longer appearance and lock at several points along the door and frame to stop burglars from gaining access through the unlocked side of your door.

If you are looking for a multipoint locking system for your uPVC doors, be sure to select a lock that has been approved in accordance with the highest standards of security. The most secure locks will be certified to SS312 Diamond or at the very least Kitemarked to TS007 3 Star and both of these standards require tests to guard against lock snapping.

WD40 can extend the life of your uPVC locks and prevent them from becoming stiff. It also stops the handle from slipping when you use it. This could be an indication of an issue with the internal springs that will need to be repaired or you're applying too much force when locking the doors.

It is recommended that if you need to replace uPVC locks, you call locksmiths who specialize in uPVC replacement locks. They will be able to advise you on the best lock for your door, and give you a competitive quote. They can also change your handles and repair any damaged panels, if needed.


A professional uPVC locksmith typically charges between PS35 and PS50 for the replacement of your uPVC door locks. They'll provide a full service that is fast efficient, and completed to the highest standard. If they have to rekey locks or board up any windows that have been damaged, it will be an additional cost.

uPVC Euro Cylinder Locks

The multi-point locking mechanism is located within the door frame and is connected to the cylinder locks (also known as door barrels). They are also used in internal glazed doors as well as conservatories. These locks provide an excellent level of security, but can be vulnerable to attacks like bumping and snapping locks. It is therefore crucial to secure your uPVC doors before going to bed or leaving your property.

Before buying, it's important to choose which cylinder lock best suits your needs. Take into consideration, for instance the frequency you lock the uPVC doors and whether you require a keyed-alike lock that allows all your doors to be opened utilizing the same key.

The most popular type of cylinder lock is the euro cylinder that is found in the majority of uPVC doors. They are typically made of brass and are available in various sizes to fit the majority of doors. The largest models are generally used for the front and back door on larger homes.

It is important that you choose a euro cylinder that has been tested according to the kitemark standards - SS312 Diamond-approved or TS007 3 star and offers protection against Picking Drilling Bumping and Snapping.

Cylinder locks come in different lengths and some have offset. This means that they can only lock from the inside if they have been closed by turning the handle up. You should also consider the amount you'd like to spend on an uPVC lock. Prices will differ based on what level of security you need and the features you wish to include.

When replacing a cylinder lock it is important to measure the door to ensure that the new lock will fit correctly. To do this, locate the cylinder screw, which is usually a large-headed screw that is located close to the lower end of the cylinder and then remove it. Then find the cylinder on the door and take a measurement from the edge of the lock face to the centre of the screw hole. This is your measurement A. Measure from the edge of your door to the middle, including any furniture. This is your measurement B. Make sure you compare A and B to be sure that you have measured correctly.

uPVC Multipoint Locks

The most secure lock for your uPVC or composite door is a multipoint locking system, which are long strip locks which run the length of the door and feature multiple bolts and hooks that lock when the handle is turned. These locks provide greater security for your home and are available in a variety of styles to suit any door style or design. uPVC multipoint locks are the kind of lock you will find on the majority of brand new uPVC doors and most wood and composite doors.

The multipoint lock fends off this attack unlike Euro Cylinder locks that are prone to "lock snapping". The locking points of a multipoint lock are linked by a bar made of steel, which blocks the hooks from moving, without taking the key out.

The majority of new uPVC and composite doors have an anti-snap multipoint lock included as standard, however if you're concerned yours may not be, it's worth having it checked by your local locksmith. You can identify the lock by opening the door and then looking at the metallic strip that runs along the length of the doors. The most commonly used manufacturers are ERA, Avocet Fuhr, or Mila.

You'll have to use a lever lever on the lock or turn the key several times to engage the locking points. This is known as winding up the lock. After double glazing window locks replace locking points have been engaged, you can utilize the handle to open and close the doors and the key deadlocks it. This will release the deadbolt that is located in the central gearbox.

When it comes time to replace your uPVC or composite front door lock, it's always best to buy from an established company that specializes in windows and doors because the locks that are used on these products play a significant function in securing your home and family. If the security and locks of your new doors do not meet the requirements buying a low-cost multipoint lock is a risky economic choice. This could not only put your family at risk but could also affect the cost of insurance.

uPVC Rim Locks

There are several types of uPVC the rim locks. The most basic one is a slam shut lock, when you close the door, it will automatically lock, however you can also get one that requires you to lock manually using the key prior to leaving the home. These locks cannot be slipped open and are one of the more secure options that you can fit to your door. They are suitable for wooden/timber doors on domestic properties and glass panelled doors for commercial buildings. You can get these locks approved in accordance with the new British Standard BS3621. This means that your insurer will give you a reduction in your cost.

Multi-point locks are utilized on uPVC doors as well as composite doors. They are extremely secure and offer the highest level of security for your home. These locks are equipped with multiple locking points that ensure that if you attempt to open the handle it will not turn. The locks are also designed to make it difficult for burglars to break through the handles, so that they are unable to retract the latch from the outside.

These locks can be fitted with mortice locks to provide additional security against break-ins through the window. They are a great option for doors that lead to outbuildings and gardens as they offer extra security from those who climb through the window to gain access.

If you have a uPVC or composite door and are concerned about the possibility of the cylinder snapping then we can provide you with an anti-snap lock which will prevent this from occurring. We install these on our composite doors and are the only uPVC installers in Belvedere that can offer this.

If you'd like to have your locks changed out of hours, it's possible to have it done since we have a van on the move that can visit your property. The locksmith cost for this is slightly higher than when we work during the day, but it's worth the extra cost for peace of mind and convenience of having your uPVC door locks changed out of hours.

Member since: Saturday, September 21, 2024

Website: https://www.repairmywindowsanddoors.co.uk/gloucester-window-lock-repairs-near-me/