McCoy User

How to Replace a UPVC Window Handle

If your upvc window handle is broken, you may be thinking of replacing it. It's a simple process and typically costs between PS5-PS10.

To start you will need to open your window handle until it's in the unlocked/open position. Then, you need to take off the screw cap. The screw cap is typically located above the handle, but it can be located beneath.

Take a measurement of the Spindle Length

It is easy to change the handle on the window, but it is important to use the correct tools. Also, take your time. It is essential to know what type of uPVC handles you have and to measure the spindle to determine the right replacement.

Typically, uPVC handles comes with a screw that holds it to the frame of the window. You can remove this screw using a screwdriver, but you should be cautious not to damage the locking mechanism. To avoid this from happening, it is recommended to use an electrical screwdriver.

After removing the screw you will be able to take off the handle. You can then replace the handle, ensuring that it is aligned correctly with the wedge block. Check that the handle can close securely. This will help safeguard your home from burglars.

There are a variety of uPVC handles that are available, including inline Espagnolettes and tilt and turn handles. These handles are fitted to windows that can be opened by turning them or tilting them open to allow for ventilation. If you are replacing the tilt and turn handle, you need to determine the spindle's length before purchasing one as various handles have different sizes of spindle.


The most efficient way to determine what kind of handle you own is to look at the bottom of it. There is a snap-in cover over an anchor screw that holds the base of the handle in place. If you remove this cover, you'll be able to see the screw holding the cockspur handle in place.

If you know the type of handle you have, it is easy to find a replacement. You can find the exact handle in the local hardware store or on the internet. However, it is important to keep in mind that the handle might not be the same color as your current one. You must also be aware of the spindle's length on the replacement handle so that it can fit into your window.

Remove the old Handle

If you've noticed that the handles on your windows are beginning to lose grip or that they're becoming stiff to turn, then it might be time to replace them. It's a simple process that can be accomplished in a few minutes. No matter if your windows are uPVC or a traditional style, you can easily install replacement handles. There are a range of different types of handle and lock mechanisms, making it crucial to select the appropriate one for your home.

The first step is to eliminate the handle that was previously in your window. This can be accomplished by locating and taking off the screws that cover the base of the handle, and then using a screwdriver to take out the screws holding the handle in position. Be careful not to damage the handle or break the frame when removing it from the window.

Next, you'll need to remove the spindle bar from the handle's back. It is usually fixed by two screws that can be removed using either a screwdriver or pair of pliers. Once the screws have been removed, you can take the handle from the window frame as well as the locking mechanism.

After removing the handle, you'll need to find a new one that has the same spindle length. The correct handle will fit your windows and ensure they are secure. If you are not sure what size handle to buy, look at the type of handle that is currently on your window. There are several different types of uPVC window handles, such as inline espagnolette handles as well as cranked espagnolette handles and tilt and turn uPVC handles.

If you have inline espagnolette handles that are equipped with a square 7mm spindle, which can be opened in either the left or right hand position. The same fixing centre is used for both tilt and turn uPVC handles, but the blade's design differs - either angled or flat. Cockspur handles have long noses that latch onto either the frame's outer or the transom bar cross member. They can be replaced with cockspag wedge blocks that are available in the same dimensions as regular uPVC handle screws.

Install the new Handle

Over time, uPVC handles can become fragile and weak from constant use and exposure to the weather. The handle could be damaged by slamming it, or closing it by force. There are a few simple solutions that can restore function to the handle.

To resolve the issue, tighten the screws that hold the handle. To tighten the screws, you can use a screwdriver. Be careful not to overtighten as this could damage the handle. If the screws are damaged or stripped, it may be necessary to replace them.

In many instances, the handle will break because it is not properly fixed or aligned with the window frame. If this is the case, then it is possible to put it back in place. This procedure is quite easy and will take only about a minute to complete.

First, make sure the window is in an open position. Then, locate any screws that keep the handle in place. They are usually located below or above the handle, and are protected by plastic caps. Remove these caps and use a screwdriver to loosen the screws at the top and bottom that hold the handle in the position.

After the screws have been removed after which you will be in a position to pull the handle away from the window mechanism. The spindle will be exposed as a piece made of steel that slots into both the handle and the window lock mechanism. The spindle will need to be repaired if it is damaged.

The next step is to replace the handle. Start by placing the handle on the glass and then marking the location with pencil. Then, insert the new screws into the holes marked and tighten them manually at first. Then, tighten each screw slowly to ensure proper alignment without damaging the handle or window frame. Finally test the handle to make sure it functions smoothly and locks securely.

Test the Handle

It's crucial that the handle operates smoothly when you open or close your windows. If your window handles don't lock correctly or are loosened it could be time to replace them. Fortunately, the process of replacing upvc windows is relatively simple and straightforward.

There are several different types of window handles used on uPVC double-glazed windows. These include Espag handles, Cockspur handles tilt and turn handles and blade or spade handles. Each of these handles serves an individual purpose and function, but all are designed to provide high levels of security.

You'll need to determine the cause of the problem before you can purchase the handle. If the handle is loosened it could be due to several factors. In some instances, it may simply need to be tightened. In other instances the issue may be more severe and require expert assistance. If this is the case, you should seek expert assistance from an uPVC specialist.

The issue could be caused by a lack of maintenance, or just general wear and tear. If the handle seems slightly looser it could be due to the fact that it was shut and opened frequently. In window handle replacement can typically tighten the screws that secure the handle to the window mechanism by using the screwdriver.

If the issue is serious it could be due to an obstruction in the handle or an internal defect. The most common problems with uPVC window handles are internal cracks in the handle which prevent it from contacting the spindle of the locking mechanism. If this is the case, it's best to contact a uPVC window specialist or local handyman to make sure that your window is functioning and safe.

It's a great idea to test the handle after you've replaced it to make sure that it operates well and securely. You can do this by opening and closing the window a few times to ensure that it opens and locks easily. It's also an excellent idea to grease the handle and lock mechanism occasionally to keep it functioning smoothly.

Member since: Thursday, September 19, 2024

Website: https://www.repairmywindowsanddoors.co.uk/sutton-window-handle-replacement-near-me/