Weeks User

Tips For Replacing a Window Handle

It is simple to change your window handle in the convenience of your own home. Use these helpful tips to ensure smooth operation and a stunning appearance.

Begin by removing the screws to expose the screws inside your uPVC window handle. Measure the spindle to make sure you're getting the correct size replacement.

1. Determine the Spindle Length

When replacing a window handle it's important to get the size of the spindle correctly. It can affect the tightness or elasticity of the handle and whether the handle will lock correctly into the frame of the window. The spindle is the metal shaft that connects to the handle as well as the lock within the frame of the window. The spindle could be a standard 8mm cross-section in the industry or the earlier 9mm versions. Modern industry standards are 8mm, however it wasn't always this way. It is crucial to verify the measurements prior to purchasing a new handle.

The most efficient method to determine the length of the spindle is take off the handle you have already installed and this can be done by turning it to the open position, then unscrewing the two screws (which could be hidden behind plastic caps that will require removal) which hold the handle. Once the handle is removed, measure the distance from the base to the end. This will give you the measurement needed to buy a replacement.


There are a lot of choices when it comes to selecting a new window handle from sleek chrome that fits in with a modern home, to traditional brass that looks stunning in restored Georgian rooms, or even the more classic Tudor cottages with curled monkey tail locks! The options are endless but the most important thing is to select a style that is suitable for your home.

Espag handles are usually installed to uPVC windows and are always identical in size with 43mm centres (2 fixings). Cockspur handles are available in a variety of sizes, from 58mm up to 62mm. Window handles from Cadenza come in an entirely different dimension due to their angled blade which operates a multi-point lock mechanism inside the window.

When selecting a window handle take into consideration the hand you use to open your door. Inline window handles aren't hand-operated and can be used for left or right handed windows. Cranked window handles are hand-operated and are only used on windows that open in one direction.

2. Remove the Handle

A window handle that has fallen out can be frustrating, regardless of whether the handle is damaged or worn out. The good news is that you can repair a uPVC handle yourself. You'll need only a few basic hand tools and time to complete the task.

The first step is to need to open the window and make sure that it is in the unlocked position. door handle repairs is to remove the screw caps that hold the handle in place. After the screw caps are removed then you'll be able remove the handle.

The handle is connected to a spindle inside the window frame. This is either held in place by a pin or a screw dependent on the kind of handle. The most common handle types are inline Espagnolette handles and handles with cockspurs. Both of these kinds of handles are used on casement windows, including aluminium windows. They can be locked using keys to stop unauthorised opening of the window from the outside or you can lock them by turning the handle clockwise.

To take the handle off, you will require a flat-bladed screwdriver. Once the clip is released, the handle should be able to slide off the spindle. Once the handle that was previously used is removed, you'll need determine the length of the spindle and ensure that the new handle will fit.

Once you have determined the correct size for the handle, you can screw it into the correct position. You will need to ensure that the new handle is securely fixed and is turning in the correct way (clockwise for open or counterclockwise for closed). It is important to ensure that the handle hasn't been installed upside down.

Replace the screw caps. Once you have done this, you can test the handle to confirm that it is working properly. You can also test the locking system by moving the handle from an unlocked position to the locked one and then back.

3. Remove the Screws

A uPVC handle is a crucial element of any home and is the first thing that shows signs of wear or damage. This can be caused by natural causes or from regular use, or intentional damage caused by criminals who might seek to open a closed window and gain entry to your home. But, a simple fix will solve the issue and stop the problem from happening again.

UPVC handles can also be difficult to remove if the locking mechanisms are not working properly. Often, the problem can be solved by replacing the multipoint lock instead of the entire handle. It's definitely worth a look as it can save you money.

After you've removed the old handle, you will need to take off the screws that secured it. They're usually on the inside face of the base. You may need to use a screwdriver to accomplish this and it's crucial to not over tighten, as this could cause the handle to become loose.

Then, you'll need to find the pins or screws that secure the handle. They are typically located on the inside of the handle base. You'll need a screwdriver to remove them. After you have removed them, you'll be required to replace the screw caps if you wish to do so and test the new handle to make sure it's functioning properly.

When you're ready for installing the new handle, simply align the spindle with the cut-out in the window mechanism and screw in the right position. Make sure the handle is in the open position and that the screws are securely secured prior to replacing the screw covers in the event that you want to do this. Then you can enjoy the new window handle. Hopefully this will help you avoid the need for expensive replacement of your door and window in the future. Contact us if need more information about this or any aspect of your uPVC window.

4. Install the new handle

Whether you're replacing a broken handle or simply updating it the procedure is simple and can be completed in a matter of a few steps. Identifying the kind of window handle, measuring the length of its spindle and knowing the tools you'll require to complete the task are essential. Always prioritise security when working with windows and tools. Make sure you follow the steps and make sure that you have a handle that is safe for use.

The first step is to find the screws holding your existing window handle in place and remove these, whilst keeping an appropriate grip on the handle to prevent it from falling suddenly and causing injury. After the screws have been removed, you can put them in a secure location to be replaced in the future.

After you have removed the handle, you can begin to install your new one. The handle needs to be a perfect fit for it to function properly and keep the window in its closed position. Then, slide the square metal bar attached to the handle into the hole for the window mechanism.

Now that the new handle is in place, the last thing to do is replace the screw caps and check to see if it functions. If you're not happy with the results, or the window doesn't shut or open properly, call our experts for assistance.

Almost all UK homes are equipped with uPVC Windows. Therefore, a large number of windows will need to be changed at some point due to wear and tear or breakage. Anyone with some DIY expertise can complete the task. The most important factor in the success of the procedure is making sure you're using a handle which matches your window's dimensions and style. Contact us if you are unsure about the type of handle you need. They'll be able assist you with all of the choices.

Member since: Tuesday, November 26, 2024

Website: https://www.repairmywindowsanddoors.co.uk/st-albans-door-handle-repairs-near-me/