Rankin User

How to Do Your Own Door Lock Replacement

Door locks and handles come in a wide range of styles that will fit any house. Some come with advanced features to make it easier to unlock the door. These include biometric recognition and keyless entry.

Before you install an entirely new lock, you need to determine which type of lock you have currently. Note the brand on the faceplate of the lock on your door.

How to replace a door lock made of plastic

If you are finding yourself having trouble with your UPVC door handle mechanism regularly, that's a telltale sign it's time to replace it. A floppy door handle isn't just annoying but also a security risk.

The first thing you have to do is grab a screw driver and take off the screw that is underneath the barrel of your lock. It's typically a little longer than the other ones and is aligned with the inner lock. If the lock's cylinder is damaged a fault you can get it fixed by inserting a key in the hole.

Once you've removed the cylinder, all you have to do is fit the new lock, which should slide in easily. It's a good idea to buy an entirely new lock from the same manufacturer as the old one and this will make it much easier to find an exact replacement. It is also possible to lubricate the lock using a dry lubricant like graphite powder, PTFE or lubricant every six months to prevent it from stiffening.

Tools required

You can replace the lock made of plastic on a door yourself if you have damaged keys or need to make a simple repair. You should examine the entire locking system to ensure it's operating correctly and that there is no screws that are loose or damaged. If you notice any, tighten them with a screwdriver, but be cautious not to overtighten, as this can damage the mechanism.

It is also a good idea to lubricate the lock mechanisms to stop them from becoming stiff or difficult to use. This will ensure that they are in good working order and improve their performance. It is important to also examine the power supply, if it exists. This will allow you to ensure that the lock is in good shape and that there are no electrical issues that could cause it to malfunction.

When replacing a door lock made of uPVC, it is essential to have all the necessary tools on hand to complete the job swiftly and efficiently. These tools include a screwdriver and a pencil. Masking tape can be used to mark precise distances and measurements. This allows you to precisely place the new lock. This is crucial to ensure that the new lock is properly aligned with the strike plate and that it is operating smoothly.

In the end, it is recommended to use a small set of pliers or tweezers to remove the old lock cylinder. This will make it much easier to take the pins off without causing damage. If you aren't able to remove the pins with the screwdriver, tweezers or graphite lubricant, you can try using a lubricant made of graphite.

It is essential to read and follow the instructions provided by the manufacturer when installing the new uPVC door lock. If you have any questions, it is a good idea to speak with the manufacturer or dealer. Also, it's recommended to bring any documentation you have when you purchase replacement parts. This will ensure that you're purchasing the right parts for your lock. This will help you avoid the headache of returning or replacing damaged parts.

Measure the door

Before you can choose a new door to replace, you must know the measurements of the current door and frame. This will ensure that the new door is sized properly. You can measure both the width and height of the frame either from outside or inside the house. You can make use of a tape measure, but a ruler or framing square will also work. You will also need a pen and paper to record the measurements. Bring a picture of the door with you to help you determine its particulars and measurements.

The method of measuring the door frame is similar to measuring a window. You'll have to measure the height and width three times and then take the smallest measurement as the final measurement. In order to get the best results, remove any hinges or handles from the door prior to when you begin taking measurements. To ensure that you don't make mistakes, you should also remove any casings or brickmoulds that overlap the frame.

Once you have your measurements, you can begin to determine the door's dimensions. Measure the height of the door jamb from the floor. oxford upvc door locks replacement can determine the door's height to determine if your current hardware will fit.

It is also important to determine the width of the door jamb is which is the distance between the inside edge and the outside edge of a wall. This will provide you with a measure of the thickness and should include any siding or trim.

Measure the length of the door, beginning at the hinges and finishing at the bottom of the frame. This will reveal the width of the doors and the frame's depth. Once you have the measurements, you can select the appropriate size for your new door. It is also important to take measurements of the distance between the frame and the wall to determine the thickness of the door frame.

Take off the lock that was previously used.


Door lock replacement is a quick and easy way to upgrade your home's security. If you have a uPVC lock that is worn out or damaged, replacing it can increase the security of your home and give you peace of peace of. This project can be completed using a few tools and doesn't require any expert knowledge.

The first step is to take off the lock that was previously installed from the uPVC door. Remove the handle from the door by loosening screws using an screwdriver. After you have removed the handle, you can get to the lock cylinder by drilling a small hole on the edge of the front door. If the lock cylinder is stuck, you can try spraying it with a lubricant, like WD-40 to loosen it.

After the cylinder has been removed the handle can be replaced. Screw the handle into place and test it to ensure it is working correctly. It is recommended to replace the cylinder screw, as it may have been lost or damaged during the removal process. You can buy a new screw at your local hardware store.

It is important to measure the key when replacing a cylinder to make sure it fits inside your door. These measurements include the length of the lock, the backset and the distance between the handle and the cylinder. Once you know the measurements, you can select the cylinder that is best suited to your door.

Installing the new cylinder lock is simple once you have the measurements. The process is easy and shouldn't take longer than 30 minutes. If you have any issues, it is recommended to refer to the manufacturer's instructions or call an expert locksmith. This will ensure that the installation has been completed correctly and that your uPVC door is safe.

Member since: Sunday, December 1, 2024

Website: https://www.repairmywindowsanddoors.co.uk/oxford-door-locks-replacement-near-me/