Briggs User

Choosing the Right UPVC Door Handle Replacement

Replacing your upvc door handles is relatively easy but picking the right handle can be a challenge. Modern double-glazed handles include spring cassettes within the handles, but older ones don't.

If the handle made of upvc on the multipoint lock is loose and floppy, it could be an internal problem. This article will cover several possible problems and their causes.

Handles that slide or loosen

UPVC handles are prone to wear and tear, especially in older properties. A broken spring cassette in the door lever is the most frequent reason for a floppy handle. This is usually due to excessive force and the square spindle that holds the cassette can become displaced or round off.

The good news is that a uPVC door handle replacement is an easy task and can be completed within a couple of minutes. The first step is to disassemble the old handle by unscrewing the fixing screws visible on the side of the lever plate. Once the handles are removed, you can unscrew and replace the cassette.

You can find a wide range of uPVC door handles to pick from on the internet and a lot of them come in a variety of finishes. The finish you select will determine the longevity of your handle and how it will be easy to clean. Finishes like PVD, Stainless Steel or Resista are designed to resist corrosion and last up to 25 years.

Once you have selected the colour or style you can then select the type of handle you need. The most popular types are pad and lever arrangements. Lever pads feature a lever inside and a paddle on the outside which is typically employed as a security measure to block access by unauthorised persons.

Then, take a measurement and note the dimensions of the handle you have. You will need to know the PZ dimension (the distance from the screw hole to the centre of the lever) and the length of the handle and the dimension of the keyhole. Once you have these measurements, you can then compare them to the handle sizes matrix to determine the right replacement.

Broken springs

Over time, uPVC door handles may become wobbly or loose and at times the spring cassette inside could break. These springs help ensure that the lever is in a horizontal direction. Without them your doors will not lock properly.

Modern uPVC handles come with these cassettes built directly into the back plate. However, older uPVC doors usually have these springs built into the lock mechanism. This isn't something you can fix yourself, but it's worth having your locksmith examine the issue as it could be the reason for the loosening of uPVC handles.

The most frequent issue that is encountered with uPVC handles is that they loosen as time passes. This is usually due to worn out springs, which are simple to fix. The majority of the time it is due to excessive use of the handle and as a result of that the square spindle in the handle will wear away and the springs will shift out of position.

To fix this issue, you'll need open the door to the handle plate, then unwind all screws. This can be done using the help of a Philips screwdriver. After the screws have been removed the handle can be taken off. The handle plates are then able to be gently pulled apart. You can then remove the old springs and replace them with fresh ones.

It is crucial to keep this in mind when buying a replacement handle. This measurement is referred to as the PZ measure and it is recommended that this measurement is done using a calibrated tape measure to ensure accuracy.

After replacing the springs you should be able to operate the handle with no issues. However, it's always worth lubricating the mechanism inside to make sure that everything is working as it should do. This will not only ensure that your uPVC doors are as secure as they can be but also make them more comfortable to use over time too.

Handles that slide around

Handles that slide around could be caused by a number of reasons, but one of the most frequent causes is when the handle levers aren't aligned properly with the lock. This is a problem that can occur with both uPVC and composite doors, but it is typically more evident on older doors because they are typically made of cheaper materials that don't stand up well to the elements.

A professional can solve this issue by re-aligning the handles so that they are in line with the lock. They will also look at the lock to see whether there's anything that needs fixing. In many cases, a minor adjustment to the springs of the handle can solve the issue.

The replacement of your uPVC door handle is easy enough, but it's important to measure the handles that are in use to ensure that you have the correct size replacement. You'll need to take measurements of the distance between the two fixing screws, and the dimensions of the lever and key hole position. Then, you can utilize this uPVC handle size guide to locate the correct replacement for your home.

After you've taken the measurements, take off the current uPVC handle. It is usually quite easy and requires only a screwdriver to get to the screws on the interior of the door. Once the screws have been removed, you can take off the handle itself and then install the new handle.

Before starting making any changes, make sure that the door is secured open by a wedge to prevent it from closing in the middle of your work. After you have removed the handle, you can inspect the components underneath the door that cause the door to slide.

A handyman from Fantastic Services will be able assist if you don't want to tackle the task yourself or aren't confident enough. They will employ special locks to open the doors without damaging the door. Then, they'll replace the damaged handle and ensure that everything is working exactly as it should.

Gearbox damage

A damaged gearbox could cause the upvc door handle to become stiff or lose functionality. The lock could also not be able to be opened using keys. This is a risk and must be addressed as quickly as is possible. It is crucial to contact a locksmith if you are unable to solve the issue yourself. They have the tools and expertise to complete the task correctly.

The first step is to remove the handle from the cover plate. This can be done using a screwdriver that has flat heads. After you have removed your handle, you are able to remove the middle screw that holds the cylinder in place. After taking out the middle screw, you'll be able loosen the two screws that are holding the barrel. You can then remove the barrel from the door. To do this, you will require someone to prop the door wide open.


Once you have removed the cylinder from the handle you can replace it with a brand new one. It is crucial to ensure that the new cylinder is the same size as the old one. You could end up with an improperly aligned handle. This could cause various issues, including leaks and drafts.

A lot of door handles made of upvc have slots that allow for adjustment. These slots can be used to tighten or loosen the handle. These slots are usually located on the inside of the doors, near the place where the handle meets with the cylinder. The slots for adjustment can be tightened by using an allen wrench. After you have made your adjustments then you can put the handle back into place and screw it in. After that, you can test the handle to make sure it's working properly.

The door handle made of upvc that becomes loose when closed is usually an indication that the spring or gearbox components have failed. This could cause your multipoint locks made of upvc to fail and leave your door open to burglars. If this happens, it will be required to replace the upvc gearbox. epsom door handle replacement will cost between PS145-PS280 including labor.

Member since: Monday, November 25, 2024

https://www.repairmywindowsanddoors.co.uk/epsom-door-handle-repairs-near-me/