Levy User

Tips For Replacing a Window Handle

It is simple to change your window handle from the at-home comforts of your home. Use these helpful tips to ensure a smooth operation and great look.

Begin by removing the screw covers to reveal the screws within your uPVC window handle. Then measure the spindle length to ensure that you receive the right size replacement.

1. Take a measurement of the length of the Spindle.

It's important that you get the spindle size right when replacing windows handles. It can influence the tightness or looseness of the handle as well as whether the handle locks correctly into the window frame. The spindle is a metallic shaft that connects the handle to the lock in the frame of the window. The spindle is available in either the standard cross-section of 8mm for industry or the older versions that measure 9mm. The current industry standard is 8mm, but this wasn't always the case, so when buying a new handle it is important to check the dimensions.

The easiest way to measure the length of the spindle is to take off the handle you have already installed, this can be done by turning it to the open position and unscrewing the two screws (which might be hidden behind plastic caps that require removal) that retain the handle. Once removed measure from the base of the handle until the end of the spindle. This will provide you with the measurements required to buy a replacement.

There are plenty of options when it comes to selecting the right window handle from sleek chrome that blends into a contemporary home to traditional burnished brass that looks wonderful in restored Georgian rooms, or the more traditional Tudor cottages with curved monkey tail latches! There are a lot of options, but the most important is to choose a style that matches your home.

Espag handles are generally installed to uPVC windows and are identical in size with 43mm centres (2 fixings). Cockspur handles are available in a variety of sizes, ranging from 58mm to 62mm. Window handles from Cadenza are a different size again since they have an angled blade that functions with a multi-point locking mechanism within the window.

When selecting a window handle take into consideration the hand you use to open your door. Inline window handles aren't hand-operated and can be used on either left or right handed windows. Cranked window handles are hand-operated and can only be used on windows that open in one direction.

2. Remove the Handle

Whether the handle is damaged or simply worn out the handle of a window that falls off can be a real pain. The good news is that you can repair a uPVC handle yourself. All you need are a few basic tools and a bit of time to complete the job.

You must first open the window and then ensure that it's not locked. Then, remove the screw caps that hold the handle in place. Once the screw caps are removed, you will be able to take off the handle.

The handle is connected to a spindle inside the window frame. It is fixed by screws or pins according to the type of handle. The most common handle types are inline Espagnolette handles and cockspur handles. Both of these kinds of handles are utilized on casement windows, as well as aluminium windows. You can lock the handles with a key to block access by unauthorised persons from the outside. Or you can lock the handles by turning them clockwise.

To remove the handle you'll need a flat blade screwdriver to release the clip holding the handle. When this clip is released the handle will fall off the spindle. After the handle has been removed, you'll need to take a measurement of the length of the spindle to make sure that the new handle is a good fit.

Once you have determined the proper size for the handle, screw it in the correct position. It is crucial to make sure that the handle is securely attached and that it rotates in the correct direction (clockwise when the handle is open or counterclockwise if the handle is closed). It is also essential to ensure that it is not installed upside down.

Then, you must replace the screw cap caps. Once you have done this then you can test the handle to make sure that it works correctly. You can also test the locking mechanism by moving the handle from the unlocked position to the locked position and then back.

3. Take off the Screws

A uPVC window handle is an essential part of any home and is often the first item to begin to show signs of wear and wear and tear or damage. This can be caused by natural elements or by regular use, or deliberate damage by opportunistic criminals who may want to open a closed window and gain entry to your property. A simple repair can fix the issue and stop it from repeating itself.

UPVC handles can also be difficult to remove if the locking mechanisms aren't working correctly. It's usually possible to resolve the problem by replacing the multipoint locking mechanism rather than the whole handle. This can save you money.

Once you've removed the old handle, you'll have to remove the screws holding it in place. These are typically located on the inside face of the handle base. merton door handle repairs may require an screwdriver to do this, and it's crucial that you don't over tighten, as this could cause the handle to loosen.

You'll then have to find the fixing pins or screws that hold the new handle in place. They're usually on the inside of the handle base. You will need a screwdriver to remove them. If you wish to, you can replace the caps on the screws and check the handle to ensure it functions properly.

If you're ready to put in the new handle, simply line up the spindle with the cutout in the window mechanism and screw it into place. Make sure that the handle is in an open position and that the screws are secured before replacing the screws' covers should you wish to do this. Once you've completed this, you're all done and you are able to enjoy your new window handle. This should allow you to avoid expensive window and door replacements in the future. If you would like more help with this or any other aspect of your uPVC windows, don't hesitate to contact us.

4. Fit the New Handle

The replacement of a damaged window handle or updating it is simple and can be accomplished in a few easy steps. The most important thing is to identify the kind of handle, take measurements of its spindle, and determine what tools you will need to complete the task. Safety is always the primary priority when working with windows and tools. Make sure you follow the steps and ensure that you have a handle that is safe for use.

The first step is to locate the screws holding your existing window handle and remove these, whilst keeping a safe hold on the handle itself to stop it from falling and injuring yourself. Once the screws are removed, you can put them in a safe location to be replaced later.


After the handle that was used previously was removed, you can now begin to fit the new one. The handle must be fitted perfectly in order to function correctly and keep the window in its closed position. Then, slide the metal bar that is square on the handle into the window mechanism hole.

The final step is to replace the screws caps and test the handle to ensure that it is working. If you're not satisfied with the results or if the window does not open and close as it should then the next step is to contact our experts who will be able to assist.

Almost all homes in the UK have uPVC windows, and as they are, a lot of them will have to be replaced at some point due to wear or breakage. Anyone with a bit of DIY knowledge can complete the task. It is crucial that the handle you select matches the size and style of your window. If you're not sure what type of handle you need, feel free to reach out to our team, who will be able to help you navigate the various possibilities available.

Member since: Monday, November 25, 2024

https://www.repairmywindowsanddoors.co.uk/merton-door-handle-repairs-near-me/