Warren User

Double Glazing Window Repairs

Are your uPVC window or door mechanism faulty? Maybe the handles on your uPVC windows and doors aren't aligned correctly or are difficult to use.


You will lose energy when your double-glazed doors do not function properly. This increases the risk of burglary. Owen the Locksmith will be able to repair your door lock at a reasonable cost.

Snapped Key

It can be a hassle when a key snaps inside a lock. It also poses a security risk since the door may not lock and leave you vulnerable to intruders. Fortunately, there are quick fixes you can use to solve the problem and get your door working correctly.

Keep calm. If you panic and begin playing around with your keys you may end up pushing the broken piece of the key further into the lock, making the situation worse.

Next spray WD-40 or a different penetrating oil into the lock to make the broken piece slide out more easily. You can also use a screwdriver to help break up any pieces stuck that might be hindering the flow. If you're fortunate enough to have a bit of the key left visible it, you can use a paperclip or some other metal object with a thin surface to grab it and remove it. Both methods are effective, but you need to be careful not to push the damaged key piece further into the keyway.

Some paperclips have grooved edges, which can be used to extract hooks and Jigsaw blades also work for this use. If you don't have any of these then you can bend a hook using needle-nosed pliers. Finally, a pair of tweezers can be used to grip and pull out the remaining part of the broken key.

If you are unable to get the broken piece of key out, try using a lock de-icer. It's usually found in most hardware stores. It works by freezing any water or ice that could be inside the lock.

If none of these solutions work, it could be time to contact a locksmith. Fitlocks specialists are able to quickly resolve issues with uPVC door mechanisms and locks that have snapped keys as well as broken handles. They can also alter the double glazing door mechanisms so that they are easier to operate. Book a double glazing repair through us online or give us a phone call to discuss your requirements.

Broken Cylinder

A broken cylinder can pose a serious security risk. It's fortunately a simple repair for an expert locksmith to complete. To repair the cylinder, locksmiths will need to tap it. They can do this using a hammer or other tools, but the most effective method is to use a long match or piece of wire. Place the match or wire end near the keyway. After that, the locksmith will strike the lock and break it open. This is far better than using a hammer, which could cause damage to the lock.

Overheating is the most common reason behind cylinder heads cracking. This can occur when the block and the cylinder head are made of various metals like cast-iron and aluminum. When the different metals are heated and cool at different rates, it could cause localised hotspots that expand faster than the rest of the head of the cylinder, leading to cracks.

Corrosion is another possible cause of cracks in the cylinder. If the head and block of the cylinder are not maintained in a timely manner they may corrosion or rust and cause them to expand faster than they would normally. This can cause cracks as time passes.

If your uPVC door or window lock is stiff or requires an enormous amount of pressure to turn, this can be the result of a number of things. This issue could be caused by a faulty locking mechanism or misalignment, as well as a worn-out handle.

Fortunately, this is an easy and cost-effective fix for the majority of double glazing owners. A professional locksmith should be able to solve this issue within a matter of hours of arriving at your property. Depending on the needs of your home they will be able to replace the locking mechanism, change the window handles, or change the gearboxes. A skilled locksmith will always be able to provide you with a recommendation on the most cost-effective solutions for your home. They can recommend upgrading to 3 Star TS007 Euro Cylinders that provide an additional layer of protection against burglars. This is a small price to pay for the peace of mind that comes with knowing your uPVC doors are secure.

Broken Handle

Window handle locks have complex mechanisms that wear out as time passes and usage, so it's no surprise that they can break. It isn't easy to determine the reason behind the broken window handle lock and repair it correctly.

Fixing the broken handle, whether it's an internal latch or locking mechanism will increase the security of your uPVC door and reduce the risk of draughts. It could be costly to replace or repair your handle incorrectly and it could also harm the frame and the lock of your door.

With the window open, loosen the screw that secures the handle by using a screwdriver. This should be located on the inside face of the back plate, and is normally hidden by an attractive cover for the screw for aesthetic reasons. You should not be able to replace any internal parts of the handle, such as the levers and plates on either side. It is best to keep them in the same order so you can replace them again in the event of a need.

Then, with another screwdriver loosen the screw that connects the handle to the spindle in the back. Once the screw is loose, you can take the handle off and remove the broken spindle. Replace it with a new spindle, ensuring it's the same length (you can purchase them online or at hardware stores). Securely screw it into the frame. Don't over tighten the screw as this could harm the handle as well as the window frame.

Close the handle and try it. It should work smoothly and you'll be able to open your windows after a few times.

Make sure to check that your uPVC window is shut properly when you're using the handle. If they're not closing properly, you may experience damp or draughts in your home. You could also compromise the energy efficiency of your home. A local window company, like Core Sash Windows, will be able to adjust the hinges on your window frames to ensure they shut correctly.

Broken Spindle

It is more likely for the spindle to break rather than the handle. This is especially frequent in uPVC tilt and turn windows. These windows require a handle that operates an locking device within the frame of the window. The handle is attached to a central rod which in turn activates cams that look like mushrooms, they lock into window frame keeps. If the dead latch mechanism is not able to open when the handle has been turned, it's likely the spindle has been damaged. This can be a frustrating problem.

Fortunately, there are options to rectify this issue. A reputable locksmith can quickly and efficiently repair this issue. A professional locksmith can disassemble the handle of the window by using a tool to remove the wheel portion in which the spindle is. This can be done without damage to the handle or the window frame.

After the wheel has been removed, the technician can inspect the spindle to determine what has caused it to break. This involves disassembling the spindle and examining each component part, noting any wear or damage. This procedure is typically carried out by technicians in a clean and safe environment.

Then, clean the damaged spindle. This will remove any dirt or other debris that could be hindering it from operating normally. The spindle can be repaired or replaced. If the technician is replacing the spindle it is possible to use a dowel that is similar in size to the original. He will then drill matching holes into both pieces. This will ensure that the new spindle is precisely matched to the handle.

If the damaged spindle can't be repaired, it could require replacement completely. Home centers sell generic replacements however if your window style is rare then you'll have to speak with an expert in cabinet making or woodworking who can make the exact part. Once the new spindle is in place it can be fitted to the handle by line up the screw holes on the handle and the frame existing screws. Once the handle is securely seated, you can operate your uPVC windows.

Member since: Thursday, December 5, 2024

Website: https://www.repairmywindowsanddoors.co.uk/hatfield-double-glazing-repairs-near-me/