Vognsen User

Tips For Replacing a Window Handle

It is simple to change your window handle in the comfort of your home. Use these helpful tips to ensure smooth operation and a stunning looking finish.

Start by removing the screw covers to reveal the screws within your uPVC window handle. Then measure the spindle length to ensure you get the correct size replacement.

1. Determine the length of the Spindle.

It is essential to have the right size spindle when replacing windows handles. It can affect the tightness or looseness of the handle and whether the handle locks correctly into the window frame. The spindle is the steel shaft that connects to the handle and to the lock within the frame of the window. The spindle could be a standard 8mm cross-section in the industry or the older 9mm versions. The modern industry standard is 8mm however this wasn't always the case, so when purchasing a new handle, it is essential to verify the dimensions.

The easiest method of measuring the length of the spindle is take off the handle you have already installed This can be accomplished by turning it into an open position and then removing the two screws (which may be hidden behind plastic caps that need to be removed) that hold the handle. Once removed you can measure from the base of the handle until the end of the spindle. This will give you the measurement required to purchase a new one.

There are plenty of choices when it comes to choosing a new window handle, from sleek chrome that blends into modern homes to traditional brass with a burnished finish that looks great in restored Georgian rooms, or the more traditional Tudor cottages with curled monkey tail latches! The possibilities are endless, but the most important thing is to choose a style that suits your home.

Espag handles are usually fitted to uPVC window frames and are always the exact same size, with a 43mm centre. Cockspur handles range between 58mm and 62mm, but luckily there are replacements available for both sizes. Window handles from Cadenza are different in size because they feature an angled blade that functions an interlocking mechanism that is multi-point inside the window.

Another consideration when selecting the best window handle is knowing what hand you need to use. This is determined by the hand you use to open the door. Inline espag handles can be used with either left or right-handed windows. Cranked window handles are only used for windows that open in a single direction.

2. Take the handle off

A window handle that has fallen out can be frustrating, regardless of whether the handle has been damaged or worn out. The good news is, you can fix the uPVC handle yourself. All you require is a few basic tools and some time to complete the process.

The first step is to have to open the window and ensure that it's in an unlocked position. Then, take off the screw caps holding the handle in place. Once the screw caps have been removed, you will be able remove the handle.

The handle is connected to a spindle within the window frame. Based on the type the handle is held in place with a screw or pin. The most popular types of handles are inline Espagnolette handles and handles with cockspurs. Both kinds of handles can be found on casement windows, as well as aluminum ones. They can be locked by using keys to stop unauthorised opening of the window from the outside, or you can lock them by turning the handle clockwise.

To remove the handle you will require a flat-bladed screwdriver. Once the clip is released, the handle should slide off the spindle. Once the handle that was previously used has been removed, you'll need to determine the length of the spindle and make sure that your new handle will fit.

Once you've determined the correct size for the handle, you can screw it into the correct position. It is essential to ensure that the handle is securely attached and that it rotates in the proper direction (clockwise if the handle is open or counterclockwise if the handle closes). It is crucial to ensure that the handle has not been placed upside down.

Replace the screw caps. After you've done this then you can test the handle to make sure that it functions correctly. Also, you should test the locking mechanism by moving the handle until it is locked position and then back to the locked position.

3. Take off repairmywindowsanddoors is an essential element of any home and is the first item to show signs of wear or damage. This can be caused by natural causes or from regular use and sometimes even malicious damage caused by opportunistic criminals who may seek to open a closed window and gain entry to your property. But, a simple fix is a simple solution and stop the problem from occurring again.

UPVC handles can be difficult to open when the locking mechanism isn't working correctly. It is often possible to fix the issue by replacing the multipoint locking mechanism, rather than the whole handle. This could save you money.

Once you've removed your old handle, you'll need to remove the screws that held it in place. The screws are typically located on the inside of the handle's base. You may require a screwdriver for this and it's crucial that you don't over tighten the screw as this could cause the handle to loosen.

You will then need to find the fixing screws or pins that keep the new handle in place. They're usually on the inside of the handle base. You will need a screwdriver to take them off. If you'd like to replace them, you can do so by replacing the caps on the screws and check the handle to ensure it functions correctly.

Install the handle by aligning the spindle with the cutout in the window mechanism. Then screw it into. If you want to replace the screws, make sure the handle is in an open position and any screws are securely fixed. Then you can enjoy the newly installed window handle. This will hopefully help you avoid expensive window and door replacements in the near future. Contact us if need more information on this or any aspect of your uPVC window.

4. Install the New Handle

The procedure of replacing a damaged window handle or updating it is easy and can be accomplished in only a few simple steps. The first step is to determine the kind of handle, take measurements of its spindle, and determine what tools you'll need to complete the job. Always prioritise the safety of your windows and tools. It's also important to take your time and follow the steps with care to ensure that you have a functional handle that is safe to use.

The first step is to identify the screws that hold your existing window handle in place. Then, remove these, whilst keeping an appropriate grip on the handle to prevent it from falling and causing injury. Once the screws have been removed they can be repositioned in a secure location to be replaced in the future.


After you have removed the handle, you can now begin to install your new one. It is important that the handle fits perfectly so that it works properly and locks the window in position. The next step is to slide the metal square at the back of the handle into the hole of the window mechanism, making sure it is secure.

The last step is to replace the screws caps and test the handle to ensure it works. If you aren't satisfied with the result or if your window doesn't open and close as it should the next step is to contact our experts who can assist you.

Almost all homes in the UK have uPVC windows and as so, a large number of them will have to be replaced in the near future due to damage or wear. Anyone with a little DIY knowledge can complete the task. It is crucial that the handle you use matches the dimensions and style of the window. Contact us if you are unsure of the type of handle that you need. They will be able guide you through all the options.

Member since: Thursday, November 21, 2024

https://www.repairmywindowsanddoors.co.uk/andover-door-handle-repairs-near-me/