Greve User

How to Replace a UPVC Door Replacement Lock

If your door lock is jammed or doesn't work in the way it should, you might need to replace it. The procedure may seem complex but it is actually quite easy and doesn't require the help of a locksmith.

A few basic tools along with a bit of patience and a lot of care should suffice. Here's what you need to do:

Take a measurement of the door

If you're having trouble locking your uPVC door or it's not closing and lock, it's time to get a new lock. If you've recently moved into a new home, a tenant left without returning keys, or your multipoint gearbox is showing signs wear and tear, switching the lock barrel to an entirely new one will offer an additional layer of security.

You'll need to take measurements prior to buying a new lock. ilford front door locks replacement will ensure that the new cylinder will be a good fit and won't compromise the security of your home. The backset is the most crucial. It is the distance from the centre of the keyhole bore hole to the edge of the door. It's typically 2 3/8 or even 2 3/4 inches. Take the length of the measurement using measuring tape, and write down the results.

You will also need to know what the faceplate thickness is. This is the thickness of the part that covers the lock mechanism. If possible, purchase a replacement lock made by the same manufacturer since they'll be manufactured according to the same dimensions. If you are unable to locate the manufacturers name or mark, just take a measurement of the width of the current cylinder. You can also confirm this by placing a pencil over the keyhole and measuring from the end of the lock to the middle of the pencil mark on the opposite side of the cylinder.

Once you have the measurements you can begin the process of removing the old cylinder. Start by loosening the screw that holds the handle in place using a Phillips-head screwdriver. After that, loosen the screws holding the interior and exterior handles together. After removing these screws you can remove the barrel screw on the handle's exterior to release the cylinder.

If the cylinder becomes stuck in the lock you can try WD-40 or another oil or lubricant. It is important to not push it out. The forceful turning of the cylinder can damage your lock's internal gearbox. You might also think about upgrading to a lock with anti-snap or anti-bump protection, which is much more robust against attacks from thieves.

Source the Lock

When you are looking to purchase the latest door lock, you need to consider the following aspects. To ensure the quality and fit make sure you purchase the correct size cylinder and from an established manufacturer. You'll also need a few essential tools to complete the job, such as a screwdriver, tape measure and a rubber mallet.

There are many indications that your upvc door lock is in danger of wearing out and will require replacement. Common problems are visible damage to the lock or a handle that's loose and not fitting correctly. If the lock begins to jam or isn't locking at all then it's time to consider replacing it.

Installing the lock correctly is crucial once you've picked the right one. This will ensure that it locks and works properly. Always follow the manufacturer's instructions to secure the new multipoint lock mechanism to the door's upvc panel and then attach the appropriate faceplates and handles. Test the mechanism by locking the door and unlocking it from the inside and outside. If everything is in order you're ready to celebrate your achievement.

Changing a upvc door lock might sound daunting however, it's an simple DIY project that can be accomplished without the help of needing a locksmith. If you can recognize the indicators that your lock is in need to be replaced and having the necessary tools available it's a relatively simple process.

Keep in mind that a upvc lock can benefit from lubrication, just like any other moving part. A few sprays of silicone or graphite powder lubricant could assist in extending their lifespan by keeping them free from excessive friction that could cause premature wear and tear. Regular cleaning with a damp cloth and WD-40 can help in keeping your door lock mechanisms in tip top condition.

Remove the Cylinder

It could be time to change the lock barrel if you are having problems with your Upvc door. This is a simple DIY project that can be completed in only several minutes, and is an effective way to maintain home security. The most important part of this process is to identify the brand of your existing lock to ensure that you find a suitable replacement.

A damaged door lock can be a real nuisance and could be a security risk. Locks on uPVC door are prone to malfunction, which is why it is crucial to check them on a regular basis. In fact, experts suggest that you change your locks every seven years. If your lock is severely damaged or you are not satisfied with its performance, expert assistance may be worth considering.

In most cases, a simple pin-based system known as the euro cylinder is employed to construct uPVC doors. They are easy to use and rarely fail however they can be vulnerable to attack. In the end, it's worth replacing your lock's cylinder with one that is more modern and has anti-snap and anti-bump security to stop burglaries.

The first step to change your uPVC lock is removing the handle and exposing the old cylinder. It can be a challenge because screws are usually hidden beneath the handles. Make sure you have your screwdriver on hand. Next, you'll need to play around with gently moving the cylinder until it starts to loosen. When it does you can remove it from its socket.

When you have found a replacement that is suitable then simply screw it into place and reverse the removal process. Be cautious not to over tighten as this can cause the cylinder to get stuck inside the door and not function as it should. Once everything is back in place, test the uPVC door replacement lock by opening and closing it from both sides. It should be able to lock and unlock the door using your key. If you don't, check whether the screws are tight and try again.

Install the Lock

Do some research to be sure that the lock you pick is right for your door. You'll need to know the backset and faceplate measurements - which is the distance from the edge of the door to the centre of the handle or cylinder as well as the type of lock you choose to ensure the new lock fits properly without compromising security.

After you've done this, it's time to install the new lock. You should ideally prop the door open, or lock it so that it doesn't close during the installation process. To begin, use a Phillips-head driver to loosen the screws holding the handle in place. Once the screws are removed and the handle is free of screws, you can slide the internal handle and the outer handle away.


You can now remove the old cylinder by removing it. After removing the cylinder, install the new lock. Make sure to adhere to the guidelines that correspond to the model you have. After the lock has been installed, you can test it by opening and shutting the door from both the inside and outside, and locking and unlocking it from the inside and testing it again.

There are many reasons you may need to change the locks on your uPVC door. You might have recently moved in and not had an entry key. The previous tenant might not have returned it. You may also prefer to upgrade your lock to one that is more secure. It shouldn't take more than five minutes to replace the lock cylinder.

No matter if your uPVC doors are equipped with multipoint or single-point locks, they all have the same basic mechanism. They may have issues like the failure to close or jam. These problems could be caused by weather conditions or wear and tear or just everyday use. Luckily, most of these problems can be fixed by a little bit of maintenance or the assistance of a locksmith.

Member since: Saturday, November 30, 2024

Website: https://www.repairmywindowsanddoors.co.uk/ilford-door-locks-replacement-near-me/