Martensen User

Choosing the Right UPVC Door Handle Replacement

Replacing your upvc door handles is a relatively simple job but picking the right handle can be a challenge. Modern double-glazed handles are equipped with spring cassettes, however older handles aren't.

If the upvc handle of the multipoint lock is loose and floppy, there could be an internal issue. This article will discuss several possible issues and their causes.

Handles that sag or loosen

uPVC handles can sustain wear and tear, especially in older properties. The most frequent reason handles become floppy is due to a damaged spring cassette in the door lever. This is caused by excessive force and the spindle holding the cassette can be moved or rounded.


The good news is that a uPVC door handle replacement is a fairly simple task and can be done in a matter of minutes. The first step is to remove the old handle unit. To remove it, you must unscrew the fixing screws visible on the back of the lever. Once the handles have been removed you can then remove the cassette from the square spindle, and replace it with a new one.

On the internet, you can select from a range of uPVC handles available in a variety of finishes. Choosing the right finish will determine the length of time your handle will last as well as how it is easy to keep clean. Finishes like PVD, Stainless Steel or Resista are made to withstand corrosion and will last up to 25 years.

After selecting a colour or style, you are able to choose the type of handle you want. The most popular are lever and pad arrangements. Lever pads are often used to block access by unauthorised persons. They have an inside lever and a paddle on the outside.

The next step is to measure the dimensions of your existing handle and note them down. You'll need the PZ dimension (the distance from the screw hole to the centre of the lever) and the length of the handle, and the dimensions of the keyhole. Once you know the measurements, you can compare them with the handle sizes matrix to determine the right replacement.

Broken springs

Over time uPVC door handles may become wobbly or loose and at times the spring cassette inside may break. The springs are used to make sure that the lever of the handle is in a horizontal direction. Without them the doors won't lock properly.

Modern uPVC handles come with these cassettes built into the back plate. However older uPVC doors often contain these springs within the lock mechanism. This isn't something you can be fixed by yourself but it's worth asking your locksmith to look as this could be the reason behind the sagging or drooping uPVC door handles.

One of the most frequent problems with uPVC door handles is that they get loose or wobbly with time, and this is usually due to worn out springs which can be an easy fix. The reason for this is usually excessive handling of the handle. The square spindle in the handle wears down and cause the springs to move.

To fix this, you will need open the door to the handle plate and unscrew all the screws. This can be done with a Philips screwdriver. Once the screws have been removed, the handle can then be taken off. The handle plates can then be carefully taken apart. The springs that were used before can be removed and replaced with new ones.

Depending on the kind of handle you have the distance between the two fixing screws may differ and it is essential to know before buying an alternative. This measurement is referred to as the PZ measure and it is recommended that this measurement is taken with a calibrated tape measure for accuracy.

After replacing the springs, you should be able to operate the handle without any problems. It is important to oil the internal mechanism to ensure that everything is operating as it should. This will not only ensure that your uPVC doors are as safe as they can be but will also make them more comfortable to use for a long time.

Handles that slide around

Handles that slide around can be caused by a variety of reasons, but one of the most common is when the handle levers aren't aligned correctly with the lock. This can happen on both uPVC and composite doors, but it is typically more evident on older doors as they are usually made of cheaper materials that don't hold up to the elements.

A professional can fix this issue by re-aligning the handles to ensure they are in line with the lock. They will also look at the lock to see if there is anything that requires fixing. In many cases, a slight adjustment to the springs of the handle will solve this problem.

It's simple to replace your uPVC handle however, you must take measurements of the handle you have to ensure that the new one is the correct size. You'll need to take measurements of the distance between the two fixing screws as well as the size of the lever and key-hole position. Then, you can use this uPVC handles size guide to find an appropriate replacement for your home.

Once you have the measurements then the next step is to take off the current uPVC handles. It is usually quite easy and requires a screwdriver to reach the screws on the inside of the door. After the screws have been removed, you will need to take off the handle, and then put in the new handle.

Before starting making any changes, make sure that the door is securely open with a door wedge to stop it from closing during the course of your work. After you have removed the handle, you can access the parts underneath the door that are causing the door to move.

If you don't have time or the energy to complete this task yourself, a handyman from Fantastic Services can help. They will employ specialist locksmith opening methods to unlock the door without causing damage and then replace the handle that is damaged, ensuring that everything is working exactly as it should.

Damaged gearbox

A damaged gearbox can cause the upvc door handle to become stiff or lose its functionality. The lock may also not be able to opened by a key. This is a risk and must be addressed as quickly as is feasible. If you are unable to solve the problem yourself, it is important to contact a locksmith as they are experts and have the tools necessary to complete the task properly.

The first step is to remove the handle from the cover plate. This can be done using a screwdriver equipped with flat heads. After removing the handle, you need to remove the middle screw which holds the barrel. Once Repair My Windows And Doors have removed this middle screw, you can then loosen the two screws that hold the barrel. Then you can take the barrel from the door. You will have to prop the door open to accomplish this, so make sure to have someone available to help.

Once you have removed the cylinder from the handle, you can replace it with a fresh one. Make sure that the new cylinder has the same size as your old one. You might end up with an incorrectly aligned handle. This can cause a variety of issues, such as leaks and drips.

A lot of door handles made of upvc have slots that allow for adjustment. These slots can be used to tighten or loosen the handle. The slots are typically located on the inside of the doors, near the place where the handle connects with the cylinder. The slots for adjustment can be tightened by using an allen wrench. After you have made the adjustments then you can put the handle back on and screw it back in. Then, you can test the handle to ensure it functions as intended.

If the door handle made of upvc becomes loose or floppy when it is closed, this is usually a sign that the upvc gearbox has failed or the internal spring components are in the process of breaking down. This can cause the upvc multipoint lock to fail, leaving your door open to intrusion. If this occurs, it will be necessary to replace the gearbox. The cost will range from PS145 to PS280 including labor.

Member since: Sunday, November 24, 2024

Website: https://www.repairmywindowsanddoors.co.uk/york-door-handle-repairs-near-me/