Russell User

Replace Lock in UPVC Door

A professional locksmith is required if your upvc door locks aren't working correctly. They are quick, efficient and complete the task to a very high standard.

It's not difficult to change the bar lock made of upvc. You just need to know what you need to do and follow the steps below.

Removal of the Barrel Lock

uPVC windows and doors are common in many types of houses. They allow natural light to enter the home and can be opened easily with the correct key. The process of changing the barrel on a uPVC door is a straightforward task that can be completed in just five minutes. It's a simple fix if you have lost your keys, a tenant has left and has not returned it, or the lock barrel is damaged.

The first thing you have to do is to remove the handle screws. This is to get the handles removed from the way so that you can access the barrel screw for locking. You should not loosen the screws too quickly since this could cause damage to the handles.

After the screws have been removed After removing the screws, look for the screw on the inside of the door that is holding the barrel lock in place. The screw is different in color to the other screws on your door and is a bit higher out. With a Phillips screwdriver, remove this screw. Use the key you use to open the lock, and then insert it into the barrel. Then, turn it to the right as much as you can. This should free the barrel and make it easier to pull out of the door.

After loosening the screw, you are now able to break the pins that hold the Euro Cylinder in place. To do this, you will need strong pliers or mole grips. Grab repair window locks upvc RepairMyWindowsAndDoors protruding part of the euro cylinder and bend it from side to side and up and down. This will cause the support pins to break, thereby holding it in place.

Installing the new cylinder can be completed after the previous one is removed. First, you'll need to determine the size of the lock cylinder in order to make sure you have ordered the appropriate replacement. This can be accomplished by measuring the distance from the center of the circular part of the keyhole to the center of the square spindle. The measurement should be taken at the top of the spindle.

Modifying the Cylinder

The euro cylinder is the principal locking mechanism of a upvc door. It is simple to replace and does not require a handyman or locksmith. If your lock doesn't have this security, you need to replace it with one that has. They're inexpensive and could help you save money and time in the event that your locks are compromised.

To start you must open the door and stand in front of it so you are able to reach the handle retaining screw by hand or using an appropriate tool. It is possible to loosen this screw a bit, perhaps a quarter-turn to begin.

After this is completed, the cylinder should come out easily as it is no longer secured by the screw. The next step is to determine what size replacement cylinder you require. There are approximately 25 sizes available. It is a good idea to take the old cylinder along when you buy a new one, so that you can be sure it will fit.

If you aren't certain of the size then take a measurement from the center of the screw hole to the top of the cylinder. This is the only way to be sure you are getting the correct size cylinder for your upvc doors.

Insert the new cylinder into your door in the opposite direction you removed the old one. Aligning the lock cam can be difficult however it's usually just a matter of alignment.

Now you must screw the long screw for securing back into position. Once this is done you can test the new cylinder to ensure it is secure within the door. If you're satisfied that it is, you can then reattach the handle and close the door to test again. If everything is working properly your cylinder lock on your door made of upvc has been replaced and you have added an extra layer of security to the home.

Change the handle

There are several reasons why a door handle or door knob can become loose. It could be due to wear and tear on the handle itself, or it can be caused by the square spindle in the handle becoming worn or loose from the force or use. In this scenario, the door handle needs to be replaced.

It is important that the door be opened so that it will not close between removing the handle and replacing it. Then, remove the screws from the interior side of the handle plate using a screwdriver. This will free your handle from the plate. Do not lose these screws, as you may need to re-screw them later.

It is now possible to remove the handles to get access to the cylinder lock within the door. The cylinder lock is round or bulb-shaped and is only found in multi-point locks on upvc and some aluminum doors. The process of changing the cylinder is similar to that of changing the handle, however, you'll have to remove the old cylinder from the door and replace it with a brand new one.

When choosing a replacement handle it is important to consider the size. Be sure that the handle is similar in size to the original one as it will need to be able to slide over the existing screws that keep the handle in place. It is best to start by looking at the size table which provides the most popular sizes of replacement handle plates as well as their keyhole centers.

It is also worth upgrading your handles on your doors made of upvc to higher security standards like the Sold Secure SS301 or 2* Kitemark set of security handles. This will improve the security of your home as well as making it a lot easier to operate the door. These sets are a bit more expensive however the increased security and peace of mind is worth it. To constantly push the handle of the door up and down to open and shut it is not something you would like to be doing.

Change the Lock

The lock on your door made of uPVC could be a target for burglars. Upgrade your uPVC to a multipoint locking system to ensure its security. This will include a deadbolt as well as an open hook to keep out the intruders. A professional locksmith can help you with this, however it is also possible to complete the job yourself. You will need several tools, but the process is quick and easy.

The first step is to loosen the screws that hold the handle in the position. You can remove the screws using a screwdriver and store them in a secure place. You can then raise the handle and reveal the screw holding the cylinder. The screw can be removed and replaced with a brand new one. Make sure the screw is of the same size as the one you used before. It must be aligned with the barrel of the lock.

Changing the lock of your uPVC can be intimidating. It is vital to the security of your home. If you make a mistake, it could make it impossible to unlock the door. If you are able to figure it out, it's quite simple and is less expensive than calling an expert locksmith.


You will need to remove the faceplate on the inside of the lock to switch the lock. You will need to be able to see the screw on the inside of the door and the retaining bolt on the outside of the door. Once you have these screws in your hands, you are able to remove and replace the faceplate.

You may need to change the lock on your uPVC door for a variety of reasons. You might need to alter the lock on your uPVC door due to a number of reasons.

Anyone with a basic DIY skill can change the locking mechanism made of uPVC. You'll need to examine the hinges inside the mechanism, which could be difficult to do if the lock is sticking. If the hinges are lubricated, it should be simple to repair. If you aren't confident doing this, it is recommended to contact a professional.

Member since: Friday, September 20, 2024

https://www.repairmywindowsanddoors.co.uk/poole-window-lock-repairs-near-me/