Pennington User

UPVC Door Lock Replacement

UPVC doors are a great protection against burglaries. They do have their limitations, which can be overcome with the installation of deadlocks.

It could be time to change the lock's barrel if your uPVC door lock feels loose. This simple DIY project will enhance the security of your home and enhance its appearance.

Take off the lock cylinder that was in the old lock.

If you're noticing that your front door feels fragile when you lock it or that the key is struggling to turn, you could have a damaged lock cylinder. It will increase security and smooth operation by replacing it. The process is simple and will take around 30 minutes. The only tool you'll need is an screwdriver. Open your door and examine the door's edge near the lock cylinder. There should be a screw that is roughly parallel to the bottom of the cylinder. Take it off using an screwdriver and store it somewhere safe.

You'll have to know the size of the cylinder you have in place so you can choose a suitable replacement. The sizes typically range from 60mm up to 110mm. To determine the size, first, you'll need to locate the screw on the lock faceplate and remove it. You can also turn the handle while the cylinder is in place to gauge how much it moves.

The next step is to take measurements of the cylinder cam as well as the cylinder diameter. These measurements are crucial to making sure that the lock you choose will fit the existing door. The dimensions of the lock can differ based on the type of uPVC. You will need to select an alternative cylinder that is the same size or a bit larger than the one you have currently.

Once you have the measurements, it's time to remove the old cylinder from the door. It's an easy task however, you must perform it properly to avoid damaging your frame or door. Make sure the door is propped up or secured so that it won't shut between steps.

If you don't have the time to tackle it yourself, hiring a professional locksmith is a good alternative. They can provide expert advice, perfect execution, and peace of mind. They can also aid you in selecting a safe and secure lock system. DIY is a great option to save money as well as gain new skills. All you need is patience and the right tools such as a Phillips screwdriver. It's not as difficult as you think to change your uPVC locks.

Installing the new lock cylinder

When you are replacing the lock on your front door, it is essential to use the correct measurements and follow the steps to ensure that the new lock is installed correctly. This will not only help you avoid issues in the future but it will also keep your home secure and permit you to use a key on both sides of the door. You should measure the uPVC lock's overall length, backset and cylinder size before replacing it. These measurements will ensure that the lock cylinder will fit inside the uPVC and work effectively without gaps.

The first step is to remove the handle from the door by loosening it with the help of a screwdriver. The next step is to take off the barrel screw holding the cylinder lock. Then, you can take out the old lock cylinder by inserting a lock key into the cylinder and turning it both to the left and the right. You can take the cylinder out with the key if it is in one of these positions.

Installing the new cylinder into the front door is easy and will require the same steps as you followed to remove the old one. Be aware that the new cylinder won't fit in the space created by the old cylinder. This is because the cylinder must be aligned properly in order to be locked and closed with keys. To do this, you should ensure that the cylinder has an open keyway that is circular and centered in its slot.


Installing the latest uPVC lock in your front door isn't difficult, but you must be careful not to harm the handles or door frames. If you have any doubts regarding your ability to complete this project it is best to hire a professional locksmith who is Checkatrade Approved and has experience working with these kinds of doors. Locksmiths can save you time and money by completing the task quickly.

Attaching the door handle

You may want to change the lock on your front entrance for a variety of reasons. You might have lost a key to your lock or the previous tenant has not returned keys, or you want to upgrade to an extra secure lock. Change the barrel on a lock on the uPVC door is an easy job that can be done within five minutes. You'll need an Phillips head screwdriver and a new lock cylinder and an extra key for the barrel (if you're using one). Make sure that the door is opened or secured securely so that it doesn't close during the process.

There could be some issues with changing a uPVC front door lock mechanism, but they're not as difficult to repair as you may think. Start by identifying what type of lock you have on your front door, and determine the size you will need to replace it with. For older doors, there are strip locks as well as multipoint locks. It's easier to replace your uPVC door lock if you know the brand and type it is.

Once you've replaced the cylinder, you'll need to reconnect the door handle to it. To begin, you'll need to loosen a set screw on the spindle shaft of the handle using the help of a screwdriver. Then, take the handle off to expose the spindle shaft. If the shaft is threaded, you'll need to loosen it a bit before backing it up a bit with a screwdriver in order to ensure that it is properly fitted.

Test the lock after you have tightened the screws and lock cylinder. Make sure that the key turns easily and fits properly, and the locking mechanism of the handle is functioning properly. If you're not comfortable doing this on your own you can have a locksmith do the job for you.

Be double glazed door lock replacement that uPVC lock mechanisms and door handles require regular lubrication in order to function properly. This is especially true in areas that experience excessive wear and tear like those that are often used, or shut and locked. A small amount of lubricant will go far in ensuring that they function correctly and prolong their life.

Test the new lock

A Upvc lock is an essential element in the security of your home. Like all other devices it is possible for a uPVC lock to wear out or become compromised in time. Regular maintenance is essential to a functioning uPVC locking system. This will prevent malfunctions from occurring and compromising the security of your home. This can be achieved by lubricating internal mechanisms each six months with a dependable oil. This will keep the lock working smoothly and prevent it from rusting or becoming damaged.

You can use a silicon spray in addition to regular lubricant to loosen up the keyway. This makes it easier to insert the keys. This is a quick DIY solution that will save you money over the course of time. Make sure you don't use WD-40because it can leave oil residue that could potentially damage the lock.

After you have installed the new cylinder, it is important to test it out before you decide if it functions correctly. You can test this by testing the handle both from both sides of the door. You can now put the handles back into place and then re-insert the spindle screws to confirm that everything is in order. Replace all screws that were holding the handles in place. Give yourself a pat on the back for a good job!

A locksmith can also install additional features to improve the security of your home, like door chains or sash jammers. They can assist you in selecting the most appropriate locks for your home. A professional can assist you in determining what size of cylinder is ideal for your doors. This is important because a lock that is not properly matched could compromise your security.

The costs associated with replacing the uPVC door lock can differ dependent on the kind of lock you select and the number of doors in need of replacement. The cost for a professional locksmith will range from PS75-PS100 per hour, however this cost will vary depending on your location and the type of lock you need. It is also important to compare locksmith prices before choosing a locksmith.

Member since: Saturday, November 30, 2024

Website: https://www.repairmywindowsanddoors.co.uk/haywards-heath-door-locks-replacement-near-me/