Sexton User

How to Replace a UPVC Door Replacement Lock

If your door lock jams or isn't functioning in the way it should, you might want to replace it. It may seem complicated but the process is easy and doesn't require a locksmith professional.

A few basic tools, a bit of patience and a lot of love will suffice. Here's how to do it:

Take a measurement of the door

It could be time to replace your uPVC doors if you are having difficulty locking them or they won't close. If you've recently moved into a new home, a tenant moved out without returning keys, or if your multipoint gearbox is showing signs of wear and tear, changing the barrel on your lock to an entirely new one will offer an extra layer security.

Before buying a replacement lock, you'll need to make sure you have key measurements that will ensure the new cylinder fits correctly and won't affect your home security. The most important one is the backset. This is the distance that lies between the centre of your keyhole bore hole to the edge of your door. It's usually 2 3/8 or even 2 3/4 inches. Take the length of the measurement using measuring tape, and write the measurements.


You'll also have to know the faceplate's width. This is the size of the faceplate that covers the lock mechanism. If you can, purchase an alternative lock from the same manufacturer since they are made to the same dimensions. If you are unable to locate the manufacturers name or mark, simply take a measurement of the width of your existing cylinder. You can also determine the width of the current cylinder by placing a pencil over the keyhole.

Once you have the dimensions then you can begin to remove the old cylinder. Start by loosening the screw that holds the handle in place using a Phillips-head driver. Then, loosen the screws that connect the handles on the exterior and interior to one another. After removing these screws, you can remove the barrel screw on the handle's exterior to release the cylinder.

If the cylinder is stuck in the lock, you could try using WD-40, or another fluid. It is important not to make it go out in a forceful way - forceful turns can cause damage to the internal gearbox, which could cause further issues with the lock. You might also consider upgrading to a lock that has anti-snap and anti bump protection, which is more resistant to attacks from thieves.

Source the Lock

Whether you're replacing an old lock after a break-in or upgrading for better security, there are some things to consider when selecting a new door lock. To ensure quality and fit ensure you purchase the correct size cylinder and from an established manufacturer. You'll also require a few essential tools to complete the job, such as tape measure, screwdriver and rubber mallet.

There are several signs your upvc lock is wearing out and requires to be replaced. The lock could have visible damage or the handle might be loose and doesn't fit properly. If the lock is jamming or doesn't lock at all, it's time to consider a replacement.

Installing the lock correctly is essential once you've selected the correct lock. This will ensure that it is locked and functions properly. Follow the manufacturer's instructions to install the new multipoint lock mechanism into the door panel made of upvc and attach the correct faceplates and handles. Test the mechanism by locking the door and unlocking it from both the outside and inside. If everything looks good then it's time to celebrate your achievement.

A door lock made of upvc might sound daunting, but it's a fairly easy DIY task that can be accomplished without the help of a locksmith. It's easy to replace your lock if one is aware of the signs and have the right tools.

Remember that like any moving component that a door lock made of upvc will benefit from some lubrication to ensure it runs smoothly. A few sprays or graphite powder can help prolong their life by preventing excessive friction. Regularly cleaning your door's lock mechanisms with WD-40 and a damp cloth will help to keep them in good condition.

Remove the Cylinder

If you're having trouble with your upvc doors and windows, it could be time to change the barrel on your lock. This is a straightforward DIY project that can be completed in just a few moments and is a great way to ensure your home's security. This process requires that you identify the manufacturer of the lock to find an appropriate replacement.

A faulty door lock can be a major pain and also an extremely security risk. It's not uncommon for the locks on uPVC doors to fail and it's essential to keep up with regular maintenance. Experts recommend replacing your lock every seven to eight years. If your lock is suffering from severe damage or you're not happy with its performance, it's certainly worth seeking out the help of an expert.

For uPVC, a simple pin system called the euro cylinder will be employed in most instances. They are simple to use and are not likely to break down, but are still vulnerable. It is therefore recommended to replace your lock with a modern model that has anti-snap and anti-bump security to stop burglaries.

The first step in changing your uPVC locks is to remove the handle. This will expose the old cylinder. This can be a little difficult as there are typically several screws concealed beneath the handles, so be sure you have a screwdriver handy. The next step is to gently pull and wiggle the cylinder until you loosen it. When it does, you can remove it from its socket.

Once you have found a replacement that is suitable you can simply screw it in and reverse the removal process. Do not overtighten the lock as this can cause the cylinder in the door to get stuck and stop working as it should. Test the uPVC replacement lock by opening and closing it from inside and outside. door lock repairs andover should now be able to lock and unlock the door with your key. If not, ensure the screws are tightened and try again.

Install the Lock

Do some research to be sure that the lock you pick is the right one for your door. You will need to be aware of your faceplate and backset dimensions which is the distance between the edge of the front door and the centre of the handle/cylinder with the type of lock you want in order to ensure that the lock is properly fitted without compromising security.

Once you've completed this, it's time to install the new lock. It is recommended to prop the door open or secure it safely so that it won't close during the process. The first step is to loosen the screws that hold the handle together using a Phillips-head screwdriver. Once the screws have been removed, you can slide the internal handle and outer handle apart.

You can now begin to remove the old cylinder, which you'll be able to do by taking it from its barrel. After removing the cylinder, install the replacement lock. Make sure to adhere to the guidelines that are specific to your model. Once the lock is in place, you can test the new lock by removing and closing the door from the outside and inside by locking and unlocking it from the inside, and then testing it again.

There are a variety of reasons why you might need to change the locks on your uPVC door. It could be because you've recently moved into the property and don't have a key, the previous tenant didn't return it or perhaps you prefer a more secure lock. Whatever the reason changing the lock's cylinder is straightforward and should only take about five minutes.

If you own a multipoint lock or single-point lock, they all work with the same basic mechanism. They can have problems like the failure to close or a jam. These problems are caused by weather conditions or wear and tear or simply the use of everyday. Luckily, most of these problems can be solved with a little bit of maintenance or by enlisting the help of locksmith.

Member since: Friday, November 29, 2024

Website: https://www.repairmywindowsanddoors.co.uk/andover-door-locks-replacement-near-me/