Holm User

Ghost II Immobiliser

Guard your vehicle from key-cloning, hacking, and theft. It's silent and inaccessible by potential thieves because it doesn't make use of LED indicators or key-fobs to alert thieves to its presence.

It can also be temporarily disabled using Transport Mode in situations like transporting your vehicle or when your vehicle is being serviced.

Simple change of PIN code

Ghost is the next generation of security devices. It can secure your car without cutting wires, or adding aftermarket immobiliser or alarm key fobs. It is directly connected to the vehicle's CAN Data Network and a personalised PIN Code can be programmed into it using the factory buttons on the steering wheel and dash. This code blocks engine start and is indetectable to any scanners or code-grabbing techniques that are used by modern thieves.

The system comes with an emergency pin code override, in the event that a user forgets his/her code or a key to program ceases to function. The system also comes with a Service/Valet Mode which allows the vehicle to be temporarily started and driven without needing a valid code, making it ideal for transportation or for servicing.

The UK automotive aftermarket, while flourishing, isn't invincible to theft. Thieves can easily bypass the most common deterrents, such as locking your steering wheel and your wheels by hacking into the OBD port of your vehicle. This can be done with an laptop, a USB cable, and a low-cost OBD scanner that can be purchased online for under PS50.

It is important to protect your car with an immobiliser for Ghost II to prevent theft. It's a small device that will help to prevent theft of vehicles. Once you have your PIN code it's simple to use. The device is in a small, compact box which can be connected to the wiring harness that is on your vehicle. It is also weatherproof and can be placed anywhere in your vehicle which makes it difficult for thieves to find. The device is also easy to install and comes with a money-back guarantee.

Weatherproof, tiny device

The device is connected to the CAN data network in your vehicle without cutting any cables and is quiet. It can be programmed using a the unique PIN code that is entered using the buttons on the steering wheel and dashboard to stop theft. It also comes with an built-in GPS tracker. It is activated by an app that you can download on your phone and is recommended by numerous insurance companies for cars. It is weatherproof and is able to be hidden in the vehicle, making it nearly impossible for thieves to locate.

Ghost II is silent, unlike traditional systems that are audible to criminals. It requires 4 to 21 press on the buttons of the vehicle. This can be determined by the owner of the vehicle according to their preferences, and the sequence cannot be re-enforced. There is a mobile phone app that can be used to deactivate the system. If you are selling your vehicle, there's also a master reset code that can reset the immobiliser's CAN bus.

Modern thieves can make use of diagnostics to detect circuit breaks on modern vehicles however, the Ghost does not contain any circuit cuts. Our team of CANbus fitters can install this system on a vehicle with confidence.

Contrary to other CANbus immobilisers, which require the use of keys and a key fob, the Ghost is compatible with all types of vehicles. The technology behind it is so advanced that it protects against a variety of security threats, including signal relay attacks as well as ECU swapping. It is compatible with a wide range of smartphones and can issue notifications to owners when their vehicle is driven in a way that is not authorized.

Tested for each vehicle

Ghost is a revolutionary immobiliser that safeguards your vehicle from key cloning, hacking, and even key theft, unlike anything else on the market today. A criminal would need to physically remove the device from your car, take it away in an enclosed trailer, and then reinstall it on another vehicle to steal the Ghost secured vehicle. It also guards against the use of wheel locks as well as jumper cables and universal keys.

This simple to install system works silently and connects to the car's CAN data circuit enabling it to directly communicate with the ECU (Engine Control Unit). It is sealed and so small that it can be wrapped in the harness of your vehicle and put in any place, making it nearly impossible for thieves to recognize.

Once it is installed, it stops your vehicle from starting until the unique disarming sequence is activated by pressing the buttons on the steering wheel, door panels or centre console. You can make it up to 20 digits in length and decide on how secure you'd prefer to be. You can also use it to activate a service/valet option that lets you temporarily start your vehicle and drive it without entering your PIN.

Because it uses the CAN data circuit, there are no radio frequency signals as the traditional immobiliser relay which means that thieves can't listen to the relay to try to figure out the PIN code is being entered. It has no circuit breaks and cannot be detected using the diagnostic tools, RF scanning, or code-grabbing technologies.

Boundary Car Care is proud to be an authorized installer of this fantastic product. We are extremely satisfied with its performance and the peace-of-mind it offers our customers. It is an excellent solution for protecting your pride and joy during these troubled times.


Emergency Pin Code override

The Ghost immobiliser is a weatherproof and tamperproof device that blocks your vehicle from starting without an entered PIN code. It's hidden in the wiring harness of your vehicle and utilizes the buttons on your steering wheel/ dashboard to create an unique code sequence that has to be entered to start your vehicle. It's not a Thatcham device, as it does not have LED indicators and is connected to your vehicle via the CAN system. This makes it untraceable by professional thieves who can detect alarm/immobiliser systems in modern vehicles with accessible diagnostic tools.

Inputting an emergency override on the app on your phone will temporarily disable your Ghost immobiliser. This allows you to lend your vehicle to someone in your family, a friend or valet without sharing your pin. It's ideal for situations such as servicing or when you have to leave your vehicle at a valet or garage.

Ghost can also be used with a driver fob which allows you the option of starting your vehicle with either your key or app. This is a great option for those with a young child who wants to drive the car or you are unable to enter your pin code quickly or if you want to use the vehicle in an emergency like an accident.

ghost immobiliser 2 's no surprise that the Ghost immobiliser with its easy PIN-change process, user friendly interface, and numerous safety features, is recommended by many insurers. It is also backed by a security warranty. Its sleek, compact and seamless integration into your vehicle's existing systems makes it an essential addition to high-performance or vintage cars.

Service/Valet mode

The Ghost immobiliser can stop theft of vehicles by blocking communication between the key and the ECU. This means the engine cannot be started without a PIN number that is unique to the. It's also hidden in the wiring, allowing it to go unnoticed and it does not use LED indicators that can give away its presence. This is ideal when you have to hand over your car to valet parking or mechanic. Enter the code supplied by your engineer upon completion of installation to activate valet mode. This allows them to start your vehicle without the need to enter an arm-disarm sequence. To exit valet, return your vehicle to normal operation. The code will change automatically back to the pin you normally use.

Contrary to other security products that rely on your vehicle's buttons or key-fobs Ghost is designed to integrate into your car's CAN bus system. This provides unrivaled protection against the latest theft methods such as key cloning or hacking.

Once installed, your engineer will show how to arm, dearm, and clean your vehicle. All of this is done using your smartphone application. Your engineer will create your unique pin that is easy to remember and mathematically impossible for thieves to guess, but in the event that you forget it do not worry as every installation comes with an Emergency PIN Code override that allows you to get your vehicle back in action.

Our installers have been trained and are able to install your Ghost correctly. All of our installations are completed at the customers premises and we offer a demonstration on how to operate the device and mobile app. Once Ghost is installed, we are able to guarantee its performance.

Member since: Thursday, December 5, 2024

https://spikecoast5.werite.net/be-on-the-lookout-for-how-how-to-install-ghost-immobiliser-is-taking-over-and