Pontoppidan User

Double Glazing Door Lock Repairs

Are your uPVC door or window mechanism broken? Maybe the handles on your uPVC windows and doors aren't aligned properly or are difficult to use.

You'll lose energy in the event that your double-glazed doors fail to perform as they should. This can also increase the risk of burglary. Owen the Locksmith will be able to repair your door lock for an affordable price.

Snapped Key

When a key snaps off inside the lock, it can be extremely difficult. This can also be a security risk, as it may leave you vulnerable to burglars if your door is not locked. Fortunately, there are quick fixes that you can attempt to fix the problem and get your door functioning properly once more.

The first step is to remain calm. If you panic you may end up pushing the damaged key further into the lock.

Then spray WD-40 or another penetrating oil into the lock to help the broken piece slide out more easily. You can also use the screwdriver to break up any pieces that are stuck. If you have a piece of the key stuck out and is not being removed, grab it with a paperclip or other thin metal object and pull it. Both methods work, but be careful not to push the broken key further into the keyway.

Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades are also well for this. If you don't have any of these items then you can bend a hook with needle-nosed pliers. Finally, you can use a pair of tweezers grab and remove the last piece of broken keys.

If you are unable to get the broken piece of key out, you can try using a lock de-icer. It's usually found in most hardware stores. It is used to freeze any moisture or ice that might be in the lock.

If none of these tricks appear to be working you, it's the time to contact a locksmith. The experts at Fitlocks can quickly solve problems like broken handles or broken keys with uPVC locks and door mechanisms. They can also reconfigure the double glazing door mechanisms so that they are simpler to use. Book a double glazing repair via our website, or give us a phone call to discuss your needs.

Broken Cylinder


A broken cylinder can be an extremely risky security issue. It's fortunately a simple repair for professional locksmiths to complete. To fix the cylinder a locksmith will need to tap it. This can be accomplished with a hammer or other tool. However, the best method is to use a wire or a long match. Then, place the end of the match or wire close to the keyway. The locksmith will strike the lock to crack it open. This is more secure than using a hammer that could damage the lock.

Overheating is the most common reason for cylinder heads to crack. This can occur when the cylinder block and cylinder head are made of various metals, including cast iron and aluminium. Different metals can heat up and cool off at different rates. Double Glazing Window Repairs taunton Repair My Windows And Doors can cause localized hotspots to expand faster than the rest of the cylinder.

Corrosion can be a reason for cracks in the cylinder. If the head and block of a cylinder are not maintained properly, they can corrosion or rust, which can cause them to expand faster than expected. This could lead to cracks in the future.

If your uPVC window or door lock is brittle and requires a lot of pressure to turn it could be due to a variety reasons. This issue could result from a defective locking mechanism or misalignment, or a worn-out handle.

It is a quick and cost-effective fix that a majority of double glazing owners can do. A professional locksmith will typically be able solve this issue within a matter of hours of arriving at your home. They can fix the locking mechanisms, or replace the window handles and change the gearboxes, depending on your specific needs. A locksmith with experience will always be able to advise you on the most cost-effective solution for your home. They can also suggest upgrades to the highest-security 3 Star Euro cylinders, TS007, that will provide an extra layer of security against burglars. This is a small price to pay for the peace of mind that comes from knowing your uPVC doors are safe.

Broken Handle

It's not a surprise that window handle locks may break. They have complex mechanisms that become less effective over time. It isn't always easy to pinpoint the reason for a broken window handle lock and repair it correctly.

Fixing your broken handle, regardless of whether it's the internal latch or the locking mechanism will increase the security of your uPVC door and prevent draughts. When you aren't doing it right, replacing or repairing the handle could be expensive and can harm the door's frame as well as lock, so it's worth taking some time to do it correctly.

With the window open, loosen the screw holding the handle with a screwdriver. The screw should be on the inside of the back plate, which is usually hidden by a screw cover for aesthetic reasons. Be careful not to lose any internal components inside the handle, like the plates or levers on either side of the spindle. Ideally, keep these in the same place so you can replace them again in the event of a need.

Then, using another screwdriver take the screw off that connects the handle to the spindle at the back. Once this is released, you'll be in a position to pull the handle off and pull out the broken spindle. Replace it with a new one, making sure that it is the same length as the previous one (you can usually find these online or in hardware stores) and screw it securely into the right place. Don't over tighten the screw because this could harm the handle as well as the window frame.

Check that the new handle is correctly fitted Close the window and test the handle. The hope is that it will function smoothly and you'll be able open your window once more.

While you're working on the handle, make sure to make sure your uPVC windows are shut properly. If they're not closing properly, you could experience draughts and damp in your home, as and also affecting the efficiency of your home's energy usage. A local window company, like Core Sash Windows, will be in a position to adjust the hinges on your window frames to ensure they can shut properly.

Broken Spindle

It is quite common that the spindle inside a handle breaks rather than the handle itself. This is most common in uPVC tilt-and-turn windows. These windows require a handle that operates an electronic locking mechanism within the window frame. The handle is connected to a central rod that triggers the mushroom-shaped locking cams that lock into the window frame keep. If the dead latch mechanism fails to open when the handle is turned it is possible that the spindle is broken, this can be a very frustrating issue.

Fortunately, there are ways to rectify this issue. A good locksmith can quickly and efficiently solve the issue. A professional locksmith can disassemble the handle of the window by using a tool to remove the wheel portion that houses the spindle. This is done without causing any damage to the handle or causing any other damage to the frame of the window.

After removing the wheel, the technician can inspect the spindle to determine the reason for its break. This involves disassembling the spindle and examining every component, observing any damage or excessive wear. This procedure is usually done in a clean environment by skilled technicians.

The next step is to clean the damaged spindle. This will remove any dirt or other debris that may be obstructing it from working normally. The spindle can be replaced or repaired. If the technician is replacing the spindle he can use a dowel that is comparable in size to the original. Then, he will make holes in the same way into both pieces. This ensures that the new spindle has a precise fit with the handle.

If the damaged spindle can't be repaired, it could require replacement completely. Home centres sell generic replacements, but if the design of your window is unusual then it will be necessary to contact a wood worker or cabinet maker who can make the exact model for you. Once the new spindle is in place it can be fitted to the handle by lining up the screw holes on the handle with the frame's existing screws. Once the handle is securely in place, you can use your uPVC windows.

Member since: Tuesday, December 3, 2024

https://www.repairmywindowsanddoors.co.uk/taunton-double-glazing-repairs-near-me/