Paul User

Choosing the Right UPVC Door Handle Replacement

It's easy to replace your upvc handles however choosing the best handle can be difficult. Modern double-glazed handles come with spring cassettes, whereas older handles don't.

If the upvc handle of your multipoint lock is loose and floppy, there could be an internal problem. This article will discuss several possible problems & their causes.

Recommended Website that sag or loosen

UPVC handles are prone to wear and tear, particularly in older properties. The most common reason a handle becomes floppy is because of a broken spring cassette inside the door lever. This is usually due to excessive force, and the square spindle that supports the cassette can become displaced or round off.

It is good to be aware that a uPVC handle replacement can be done in a matter of minutes. The first step is to remove the old handle unit. To remove it, you must unscrew the fixing screws visible on the backside of the handle lever. Once the handles are removed you can remove the cassette from the square spindle and replace with an entirely new one.

You can find a wide variety of uPVC door handles to pick from online and many of them come in a variety of finishes. The finish you choose will determine the durability of your handle and how easy it will be to clean. Finishes such as PVD, Stainless Steel or Resista are designed to withstand corrosion and will last up to 25 years.

Once you have selected the colour or style you can choose the kind of handle you want. The most popular kinds are lever and pad arrangement. Lever pads are often used to stop access from unauthorised people. They feature a lever inside and a paddle out.

The next step is to determine the dimensions of your current handle and write them down. You will need to measure the PZ dimension, which is the distance between the screw hole and the middle of your lever. You will also need to be aware of how the handle's length is and the dimensions of its keyhole. You can compare the measurements to the handle size matrix to determine the correct replacement.

Broken springs

Over time, uPVC handles can become wobbly or loose. The spring cassette may also break. The springs are used to align the handle lever in a horizontal position. Without them the doors won't lock properly.

Modern uPVC handles are constructed with these cassettes integrated directly into the backplate. However, older uPVC doors typically include these springs in the actual lock mechanism. This isn't something you can do yourself, but it's worth having your locksmith examine the situation as this could be causing the loosening of uPVC handles.

The most common problem that is encountered with uPVC handles is that they become loose over time. This is usually due to worn-out springs that are easy to fix. This is usually caused by excessive handling of the handle. The square spindle in the handle will wear down and causes the springs to move.

To fix this, you will have to open the door to the handle plate and unscrew all screws. This can be done by using the Philips screwdriver. Once the screws have been removed, the handle can be removed and the handle plates ripped apart with care. Then, you can remove the springs from the old ones and replace them with fresh ones.

It is crucial to keep this in mind when purchasing a replacement handle. This measurement is referred to as the PZ and it is crucial to use a calibrated measuring tape for an accurate reading.

After replacing the springs, you should be able to operate the handle without any problems. It's worth lubricating the internal mechanism to make sure that everything is functioning just as it should. This will not just ensure that your uPVC doors are as secure as they can be but also make them more comfortable to operate over time too.

Handles that slide around

Handles that slide could be caused by a variety of factors. One of the most frequent causes is when the levers of the handle are not aligned with the lock. This is a problem that can occur with both uPVC and composite doors, however it is usually more noticeable on older doors since they are often made from less durable materials that don't hold up to the elements.

This issue can be fixed by a professional, who will realign the handles and ensure that they are in line with the door lock. They will also look at the lock itself to see whether there's anything that needs fixing. In many cases, a slight adjustment to the handle springs can solve the issue.


It's simple to replace your uPVC handle, but you need to measure the handle that you are replacing to ensure that the replacement is the correct size. You'll need to take measurements of the distance between the two fixing screws, and the size of the lever and key-hole position. You can then use this uPVC handle size guide to locate the right replacement for your home.

After you have taken the measurements, you can remove the current uPVC handle. It's usually a straightforward procedure and requires only the use of a screwdriver. Once the screws are removed, you can then remove the handle and then move onto installing the new handle.

Before starting the work, you should ensure that the door is securely open by a wedge to prevent it from closing during the course of your work. After you have removed the handle, you can now inspect the underside of the door to correct the issues that are causing it to slide.

A handyman from Fantastic Services will be able to help if you don't want to do the job yourself or aren't confident enough. They will employ specialist lock picking techniques to unlock the doors without creating damage. They will then replace the broken handle and make sure that everything is working just as it should.

Damaged gearbox

A damaged gearbox could cause the handle made of upvc to become stiff and lose its function. This could prevent the lock from being able to be opened using keys. This is extremely dangerous and should be dealt with promptly. It is essential to contact a locksmith if you are unable to resolve the problem yourself. They have the equipment and knowledge to get the job done right.

The first step is to remove the handle from its cover plate. You can do this with an instrument that has a flat-headed tip. After you have removed the handle, remove the middle screw that holds the cylinder. After you have removed the middle screw, you will then loosen the two screws that hold the barrel. Then you can take the barrel out of the door. To do this, you will need someone to prop the door wide open.

After taking the cylinder off, you can replace with a new cylinder. Make sure the new cylinder is the exact size as your old one. In the event that it isn't, you could end up with an unaligned handle correctly. This could lead to various issues such as leaks and draughts.

A lot of doors made of upvc have adjustable slots which can be used to tighten or loosen the handle. These are usually located on the inside of the door, near where the handle is connected to the cylinder. Allen wrenches can be used to tighten the slots of adjustment. After you've made all the necessary adjustments, you can screw the handle into and put it back in place. Then, you'll be able to test the handle to be sure it's working properly.

If the door handle of upvc becomes floppy or loose when closed, it's usually a sign that the upvc gearbox has broken down or internal spring components are breaking down. This could cause your multipoint locks made of upvc to fail, leaving your door wide open to burglars. In this case, the upvc gearbox must be replaced. The cost will range from PS145 to PS280 with the labor included.

Member since: Saturday, November 23, 2024

https://www.repairmywindowsanddoors.co.uk/solihull-door-handle-repairs-near-me/