menu
Daily Bits Email

The email you entered is already receiving Daily Bits Emails!

Virus Scan for FastPaste 3

Introducing... Super Clipboard!

So much more than copy-cut-paste, this powerful clipboard extender offers management of multiple, formatted elements. Not just "ctrl-V" now it's "ctrl" A through Z.

Our virus scan reports this download is 100% Clean Free Download

Download Virus Scan - FastPaste 3

We've scanned the download using a variety of antivirus software and can bring you the following results.

Virus ProgramResultScan Date
MicroWorld-eScan (v 12.0.250.0) Clean 1/17/2013
nProtect (v 2013-01-17.01) Clean 1/17/2013
CAT-QuickHeal (v 12.00) Clean 1/17/2013
McAfee (v 5.400.0.1158) Clean 1/17/2013
Malwarebytes (v 1.62.0.140) Clean 1/17/2013
K7AntiVirus (v 9.158.8121) Clean 1/17/2013
TheHacker (v None) Clean 1/17/2013
NANO-Antivirus (v 0.22.6.49175) Clean 1/17/2013
F-Prot (v 4.6.5.141) Clean 1/17/2013
Symantec (v 20121.3.0.76) Clean 1/17/2013
Norman (v 6.08.06) Clean 1/17/2013
TotalDefense (v 37.0.10254) Clean 1/17/2013
TrendMicro-HouseCall (v 9.700.0.1001) Clean 1/17/2013
Avast (v 6.0.1289.0) Clean 1/17/2013
eSafe (v 7.0.17.0) Clean 1/16/2013
ClamAV (v 0.97.3.0) Clean 1/17/2013
Kaspersky (v 9.0.0.837) Clean 1/17/2013
BitDefender (v 7.2) Clean 1/17/2013
Agnitum (v 5.5.1.3) Clean 1/17/2013
ViRobot (v 2011.4.7.4223) Clean 1/17/2013
ByteHero (v 1.0.0.1) Clean 1/17/2013
Emsisoft (v None) Clean 1/17/2013
Comodo (v 14947) Clean 1/17/2013
F-Secure (v 11.0.19020.35) Clean 1/17/2013
DrWeb (v 7.0.4.09250) Clean 1/17/2013
VIPRE (v 15072) Clean 1/17/2013
AntiVir (v 7.11.57.180) Clean 1/17/2013
TrendMicro (v 9.740.0.1011) Clean 1/17/2013
McAfee-GW-Edition (v 2012.1) Clean 1/17/2013
Sophos (v 4.85.0) Clean 1/17/2013
Jiangmin (v 13.0.900) Clean 12/21/2012
Antiy-AVL (v 2.0.3.7) Clean 1/17/2013
Kingsoft (v 2013.1.5.217) Clean 1/15/2013
Microsoft (v 1.9103) Clean 1/17/2013
SUPERAntiSpyware (v 5.6.0.1008) Clean 1/17/2013
GData (v 22) Clean 1/17/2013
Commtouch (v 5.3.2.6) Clean 1/17/2013
AhnLab-V3 (v 2013.01.18.00) Clean 1/17/2013
VBA32 (v 3.12.18.4) Clean 1/17/2013
PCTools (v 8.0.0.5) Clean 1/17/2013
ESET-NOD32 (v 7905) Clean 1/17/2013
Rising (v 24.45.02.03) Clean 1/17/2013
Ikarus (v T3.1.3.5.0) Clean 1/17/2013
Fortinet (v 5.0.26.0) Clean 1/17/2013
AVG (v 10.0.0.1190) Clean 1/17/2013
Panda (v 10.0.3.5) Clean 1/17/2013

SHA-256 Hash: f387dc9578103f9634212162376249964b35988239f3f3ab37578bcf3b66b6bd
Learn more about Virus Scan SHA-256 Hashes and Virus Scan False Positives

Website Malware/Phishing Scan - Dextronet

We've scanned dextronet.com using a variety of antivirus software and can bring you the following results.

Virus ProgramResult
CLEAN MX Clean site
Rising Clean site
OpenPhish Clean site
VX Vault Clean site
ZDB Zeus Clean site
AutoShun Unrated site
ZCloudsec Clean site
PhishLabs Unrated site
Zerofox Clean site
K7AntiVirus Clean site
SecureBrain Clean site
Quttera Clean site
AegisLab WebGuard Clean site
MalwareDomainList Clean site
ZeusTracker Clean site
zvelo Clean site
Google Safebrowsing Clean site
FraudScore Clean site
Kaspersky Clean site
BitDefender Clean site
Wepawet Clean site
Certly Clean site
G-Data Clean site
C-SIRT Clean site
CyberCrime Clean site
Websense ThreatSeeker Clean site
MalwarePatrol Clean site
Webutation Clean site
Trustwave Clean site
Web Security Guard Clean site
desenmascara.me Clean site
ADMINUSLabs Clean site
Malwarebytes hpHosts Clean site
Dr.Web Clean site
AlienVault Clean site
Emsisoft Clean site
Malc0de Database Clean site
SpyEyeTracker Clean site
malwares.com URL checker Clean site
Phishtank Clean site
Malwared Clean site
Avira Clean site
StopBadware Unrated site
Antiy-AVL Clean site
SCUMWARE.org Clean site
FraudSense Clean site
Opera Clean site
Comodo Site Inspector Clean site
Malekal Clean site
ESET Clean site
Sophos Unrated site
Yandex Safebrowsing Clean site
Spam404 Clean site
Nucleon Clean site
Malware Domain Blocklist Clean site
Blueliv Clean site
Netcraft Unrated site
PalevoTracker Clean site
CRDF Clean site
ThreatHive Clean site
ParetoLogic Clean site
Tencent Clean site
URLQuery Unrated site
Sucuri SiteCheck Clean site
Fortinet Clean site
ZeroCERT Clean site
Baidu-International Clean site
securolytics Clean site

Website 100% Clean Badges

Let your website visitors know that they can trust your download is 100% safe by using the following badges on your website.

FastPaste 3 Virus Scan Report
FastPaste 3 Virus Scan Report
FastPaste 3 Virus Scan Report
FastPaste 3 Virus Scan Report
FastPaste 3 Virus Scan Report

What are people saying about FastPaste 3

Michael Mortimer Since 2002 I have used a program called SureType by Rampell.

A few years back I guess RIM (the BlackBerry people) bought them because all of a sudden I saw SureType on the Blackberry Pearl. Now when I click in the program to go to SureType it goes to RIM's site. And once there there is no support for SureType product I have.

So for the past year I have been looking for a replacement for SureType since 1) there is no longer support for it; and 2) at some point it will not work with the newer operating systems, I assume (it works with Vista and XP).

So I will try this program out and post my impressions.

I'll tell you people, once you get used to this type of program it is impossible to go without it.

I use SureType to enter often repeated text, URLs, serial numbers for software, addresses in online forms, etc. One time I had about 50 final exams to grade. I promised comments on each students exams (submitted in Word format) on the questions they got wrong. Well after about three graded exams I said to myself "this is going to take forever."

What did I do? I copy and pasted a comment to each question into SureType and assigned it a shortcut number that corresponded to the exam question.

When a student gave a wrong answer all I had to do was type "01" and a backward slash (the key symbol I chose to tell the computer it was a SureType command) and the comment instantly was pasted into the student's exam. What a breeze.

Is this program the replacement for SureType that I am looking for? I'll get back to you on that.

Now I will type my SureType command that I use to end e-mails. I type "RMM" and the forward slash to insert:

Regards,

Michael Mortimer
Aug 27 2009 at 6:49pm Copy Link
1
Nick Kobe Hi!

Is the license per user or per computer? I have a desktop and a number of laptops that I frequently use and limit my software purchases to per user license.

Thanks!

Nick
Aug 27 2009 at 11:06pm Copy Link
0
Dextronet Hello Nick,

As long as you are the only person using the program, you can install it on all your computers. So it is per-user :)

Have a great day Nick!

Jiri Novotny, FastPaste author
Dextronet - Aug 27 2009 at 11:14pm Copy Link
1
Patrick J. FYI: last version update Dec 1, 2008
Jun 20 2011 at 12:07am Copy Link
0
Zsolt Szabo Oops, it doesn't sound good...
Jun 20 2011 at 2:49am Copy Link
0
DrTeeth Eeek! Very bad...deadware.
Jun 23 2011 at 12:44am Copy Link
0
Stan It seems to work so why should it be updated?
Jun 23 2011 at 1:31am Copy Link
0
Dextronet We still fully support the product. Many companies are still purchasing multi licenses for 10 or 20 computers.
Dextronet - Jun 23 2011 at 1:54am Copy Link
0
Barnet FYI for ya: I use FastPaste every day. This is NOT deadware. A simple, efficient, fast solution that indeed does work just fine.
Jun 23 2011 at 4:44am Copy Link
2
Steve McMahan Do I understand this correctly? I can use this program on my home AND office computer (as long as I'm the sole user)?
Jun 23 2011 at 5:09am Copy Link
0
Dextronet Steven: You need 2 licenses for that. You can transfer the license to another computer, but you can't use it on 2 different computers.
Dextronet - Jun 23 2011 at 5:13am Copy Link
0
Stan @Jiri Novotny: you wrote: "Hello Nick,
As long as you are the only person using the program, you can install it on all your computers. So it is per-user :)
Have a great day Nick!
Jiri Novotny, FastPaste author" (Aug 28 2009)

What is right?
Jun 23 2011 at 5:38am Copy Link
1
Dextronet We've changed our licensing since then, so it's now same for all of our products. The old licensing applies to customers who purchased FastPaste in the past.
Dextronet - Jun 23 2011 at 5:49am Copy Link
0
Staley Why the change it licensing? It seems like the other one would be easier and more beneficial for the user?
Since most users wouldn't be using the program concurrently.
Jun 23 2011 at 6:21am Copy Link
0
Dextronet Staley: As I said, we want the same licensing for all of our products. I think that the licensing is still quite beneficial. We don't online activation, and you can transfer the product to another computer if you need to. All licenses are life-time and will never expire. Plus we have crazy 90-day money back guarantee.
Dextronet - Jun 23 2011 at 6:30am Copy Link
0
Markus Meyer I've just downloaded it to look around and I don't quite get it. You get comparable software (e.g. Clipboard History from outertech.com or ClipX from bluemars.org) for free.
Jun 23 2011 at 2:35pm Copy Link
0
Steve McMahan I seemed to have opened a can of worms here. If I needed to use this program on two computers, I would not really save anything over paying the regular price under the old licensing, i.e., not really the greatest marketing. Having said that, EITHER price is peanuts compared to the amount of work it has saved me just since last week when I ordered it. Bottom Line: Still a great deal for a good program and should I decide I really need it on a second computer, I wouldn't mind a bit paying the regular price for a single license. My thanks to the creator of this little gem.
Jun 26 2011 at 5:01pm Copy Link
0
SoftCollector Reading the old comments... Has there been a new version published, or is this the 2008 one?

Kind Regards,
SC
Dec 11 2011 at 7:52am Copy Link
0
Dextronet Hi SoftCollector: This is the same version. There are not any known bugs, so we've not released an update for some time. However, we plan to add some new features in the near future, so if anyone has some suggestions or feature requests, definitely get in touch - http://www.dextronet.com/.../fastpaste
Dextronet - Dec 12 2011 at 1:02am Copy Link
0
Don Wilcox Is this special offer for the Standard or Professional version? If for Standard is there a special pricing for the Pro version also?

Is there a size limit to how large a clip can be saved? Sentence? Paragraph? Page?

Is there a 64-bit version or does both 64 and 32 bit use the same version?

Does FastPaste disable and replace Windows clipboard? Or will I have to learn new shortcut keys to cut, copy and paste? Does FastePaste work with context menu cut, copy and paste?

Thanks,
Don
Apr 11 2012 at 2:22pm Copy Link
0
Roger Thomasson @ Don

Both the Standard and Pro versions of FastPaste will be discounted :)

-r
BitsDuJour Admin - Apr 11 2012 at 2:22pm Copy Link
0
Dextronet Hi Don: There is no limit on clip size. It works on both 32 bit and 64-bit OS (it's a 32-bit executable). It does NOT replace or disable Windows clipboard. FastPaste does not work with the standard context menu - it just adds you ability to quickly insert text phrases and other things using multiple ways - global hotkeys, buttons in FastPaste window, notification area menu, etc.
Dextronet - Apr 11 2012 at 9:44pm Copy Link
0
Don Wilcox What will the Pro version price be?
Apr 11 2012 at 9:45pm Copy Link
0
shachar milo Hello,

Is this supporting at Hebrew ?

shachar
Apr 11 2012 at 10:21pm Copy Link
0
Dextronet Hi Schachar: We support Unicode, but right-to-left languages are not supported.
Dextronet - Apr 11 2012 at 10:26pm Copy Link
0
Software Guy This is a nice utility and it just became much better in this new version 3 which now sports multilines and supports form fill. Suggest you visit here
http://www.dextronet.com/fastpaste
and after checking that out read the features tab too - http://www.dextronet.com/...e/features
And yes, a more limited version of this feature is available in several popular clipboard managers... and yes, clipx is free and very cool with its plug ins, and so is orangenotes http://orangenote.littlesoftware.ca/ and others) but this is designed to work with your clipboard manger and has the continuous support of Dextronet - meaning top notch.
One more favorite that is somewhat similar conceptually are the keyboard expanders like Breevy by 16software, who also makes the excellent but specialized Icy Screen capture/send software.
OK, one more again - smart type assistant from http://blazingtools.com - free and interesting variant of a self learning breezy.
Not fond of the per computer licensing - hope that Dextronet would at least offer desktop plus laptop - but they do have a portable version. The new features of version 3 make this utility a must have, especially if you do any sort of repetitive typing - definitely recommended.
Apr 12 2012 at 9:19am Copy Link
0
Mary Wilson What are the differences between the standard vision and the proffessional vision. Could not find anything at your websight. Also, what exactly will your upgrade policy be for this addition.
Apr 14 2012 at 4:16am Copy Link
0
Dextronet Mary: You can find the differences here: http://www.dextronet.com/...e/editions

All 3.x upgrades will be free for existing customers, and v3 has been released just recently.
Dextronet - Apr 14 2012 at 6:10am Copy Link
0
lisba f You claim that this version includes Unicode support, and that's true for the names I give to clips, but on the bottom of the FP dialog box, in the Last Active Window, the name does not appear correct: some characters are replaced with question marks.
Also I cannot find the way to save clip-arts, images or a page of a PDF file. I tried copy/past; I tried to drag them on FP but neither works. Is it something I'm missing?
Another question. I press Ctrl-1 or 2 but the # 1 or 2 clip does not paste in my Word file.
Apr 14 2012 at 6:25am Copy Link
0
Dextronet Lisba: I will investigate the "Last Active Window" label. The actual clips can contain Unicode. PDF files can't be stored in FastPaste, but you can store images. Edit the clip, and select the Image type of the clip, and THEN paste the image. Do you have some content in the #1 or #2 clip?
Dextronet - Apr 14 2012 at 6:28am Copy Link
0
lisba f Of course I put some content in the clips and then tried to paste them; I put latin and non-latin text but then pressing Ctrl + the appropriate numbers nothing seems pasted.
Apr 14 2012 at 7:00am Copy Link
0
Dextronet Lisba: That is strange. No one else has reported this issue yet. Perhaps you've changed the hotkey to something else? If not, then try that (you can change the hotkey in the Edit Clip window.)

Or perhaps you've disabled the AutoPaste using menu Options - AutoPaste on Global Hotkey?
Dextronet - Apr 14 2012 at 7:59am Copy Link
0
VLM Software Guy - thanks, as always, for another informative review.

IIs this program Windows-8 ready?

s anyone familiar with both this product and ClipCache? Do they seem complementary, or do they seem to sit upon the same turf, so to speak?
Apr 14 2012 at 9:41am Copy Link
0
Kelly Major I'm going to give this software a quick trial. I've used ClipMate since the beginning of time (g). I wish I had more time to trial it and still take advantage of the sale price.

Also, the per computer license is something I typically avoid. As a software developer myself I have 3 workstations here, 2 laptops, and I don't even know ho many VMs that have. I find that I want my tools like this to be on every OS image where I work but unless the trial results are astonishing in the short time I have I can't see myself buying 12 licenses just for myself. We'll see...

- KEM
Apr 14 2012 at 12:27pm Copy Link
0
Robert Bull Does the "form filling" feature work like RoboForm and work out for itself what goes into what field, or does it require you to organise what to paste where yourself, like KeePass?
Apr 14 2012 at 12:50pm Copy Link
0
lisba f Problem solved with Ctrl + numbers: I reinstalled FP (who knows, I might have done some changes in Options). So, besides that little thing with Unicode everything else works fine.
Apr 14 2012 at 1:18pm Copy Link
0
Mary Wilson For upgrade, I meant when it goes to Version 4.0.
Apr 14 2012 at 1:43pm Copy Link
0
Chris Roy Jackson Jiri,
If I buy the Professional edition, what will be the (Functional) difference between using it on my computer (that it is installed on) and using the Portable version on a computer on which FastPaste has NOT been installed ???
Apr 14 2012 at 2:22pm Copy Link
0
VLM Can you create ALL your own shortcuts (modify existing FP shortcuts at will)? And can you decide freely which to make global and which to make app-specific?
Apr 14 2012 at 3:20pm Copy Link
0
Louis H Just purchased and was pleased to see the offer of a 1 user 3 pc license for either the standard or professional version at a very nice discount as well!
Apr 14 2012 at 7:24pm Copy Link
0
Dextronet VLM: Yes, you can customize all the shortcuts. All clips shortcuts are global though.

And yes, you can send key combinations, such as Win+1, then F then P.
Dextronet - Apr 14 2012 at 11:15pm Copy Link
0
Dextronet Chris: There will be no functional difference.
Dextronet - Apr 14 2012 at 11:16pm Copy Link
0
VLM Thanks Jim. Regarding the key combinations, is that true only of the pro version?

I missed the deal, because I went to sleep before your reply arrived. But I'd still like to know, as I am impressed with the product.

I do still wonder whether it would be seen as more complementary or competitive with something like ClipCache.
Apr 15 2012 at 5:54am Copy Link
0
Mary Wilson Really wished my questions had been answered in a timely matter. Due to them not being answered, I did not purchase the deal.
Apr 15 2012 at 7:26am Copy Link
0
VLM Mary Wilson - I share the same sentiment, all around.
Apr 15 2012 at 7:52am Copy Link
0
Dextronet VLM: The shortcuts can be customized in all editions. FastPaste is not a clipboard history tool - it's a tool for quick inserting of text and images and executing simple keyboard scripts.

The hotkeys are registered system-wide, which prevents most conflicts - FastPaste receives the registered key first, and Windows do not pass it to other applications. FastPaste does this in a smart way though - only the actually used keys are registered.
Dextronet - Apr 15 2012 at 11:06am Copy Link
0
VLM Thanks Jim, I appreciate your explanation. The conflict would still exist, though, but it would occur inside Outlook (or whatever other application). Honestly, though, there are so many applications with so many shortcuts, there are bound to be conflicts here and there. The use of global shortcuts exacerbates this problem for some, but I really don't see how you could make FastPaste work any other way.

I appreciate your comment about FP not being a clipboard history tool. FastPaste can/does pick up content from the clipboard though, yes?

Thanks again!
Apr 15 2012 at 3:18pm Copy Link
0
Jeff Titamer I've purchased Fast Paste with one lisence and absolutely love it! And I only use it for a couple of things... accessing my password safe and entering my email address, so far. I have arthritis so it helps ease the pain and makes things so much easier and faster! Another great utility that compliments this offer is StickyPassword Pro. Now that I use these two programs my fingers are starting to feel better.

Will FastPaste be going on sale again soon? I would like to get some more licenses. Hopefully it will go on sale again when I have some money in my bank for it. I get paid by SS Disability, once a month so I hope I don't miss out because it's on sale at the end of the month when I am most likely low on funds either.
May 17 2012 at 7:37pm Copy Link
0
Amit Hello,

Is it like a macro software ? Only the pro version can be thought of like a macro software or the standard as well ?

Also does it also store clipboards ever copied - and all clipboard data ever copied - even 2 months ago or there is the 300 clipboards data limit ?

And can all functions and clips or assigned texts be pasted from the system tray icon - i really dont like playing with too many hotkeys.

Can it be used to replace a password manager and form filler too - is it in that category too ?

Thanks.
Aug 5 2012 at 1:16am Copy Link
0
Dextronet Hi Amit,

The Pro version can execute keyboard scripts, the Standard version is only for inserting text/rich text/images.

In both Standard and Pro, you can use time tokens to construct your own time/date stamps.

Yes, you can access most functions via the system tray menu, directly from the window (which can be docked as a sidebar, or set always on top), or using a single global hotkey which displays global paste menu.

No, FastPaste doesn't store clipboard history.

And yes, you can use it for storing passwords and logging into applications.
Dextronet - Aug 5 2012 at 6:20am Copy Link
0
Danny Is this FastPaste software associated with free lifetime upgrade assurance?
Aug 6 2012 at 2:12pm Copy Link
0
Jason Howard @Danny - if you go to the FastPaste website the differences are explained there.

http://www.dextronet.com/...e/editions
Aug 8 2012 at 1:41am Copy Link
0
Dextronet Danny: FastPaste comes with free minor upgrades. We don't expect to release new major version anytime soon, so we will keep making all improvements as free upgrades.
Dextronet - Aug 8 2012 at 2:09am Copy Link
0
Glen Hilton RE Apr 11 at 2:22pm
"There is no limit on clip size"

I can't do better than a 32kb txt snippet limit. Sorry, others look more appealing even as a 3rd or 4th clipper than this, esp now with the updated FP user policy..
Aug 8 2012 at 2:44am Copy Link
0
Dextronet Glen: Plain-text clips are capped at about 32kB, which is something like 1000 lines of text. That should be plenty. But even if you need more, you can use the Rich-Text format (when you copy it, it is placed as plain-text into the clipboard as well).
Dextronet - Aug 8 2012 at 2:49am Copy Link
0
Roberto The autopaste feature does this in my computer:

1. i open notepad and fastpaste (side by side).
2. i press the copy button (the autopaste is checked in options)
3. it works 1 time each 5 or 6 (i have to press many times until the text is pasted)

is there some delay or script that i can set for proper paste?

im on xp sp3, and i think fastpaste 3 is pasting the text while the active window still is not active (only my guess)

i wish to use it side by side, with hotkeys works fine.
Aug 8 2012 at 5:21am Copy Link
0
VLM Jiri,

Can clips be stored in a hierarchy (folders, categories, or the like), so that s/he can effectively use keyboard sequences (combos) to navigate to a desired clip?

For example, I may have several hundred clips all related to a particular topic or activity. I would wish to get to that folder/category, where I would see subfolders/subcategories and perhaps a few common clips (common across all the subcategories). The next keystroke would open one of the subfolders/subcategories, etc., until I arrive at what I seek. Sort of like navigating a menu tree.

??
Aug 8 2012 at 5:36am Copy Link
0
Dextronet Robert: Unfortunately, I am unable to reproduce the issue on my Windows 7 machine nor Windows XP machine. Do you use any shell extension software which could slow-down application switching?

Specifying a delay is currently not supported, but we could probably add it in the future.
Dextronet - Aug 8 2012 at 5:53am Copy Link
0
Dextronet VLM: Because FastPaste is designed towards heavy keyboard use, it has rigid structure: 30 clips per file. It also has 10 hotkeys for switching files, so you can have up to 300 clips accessible via keyboard. There is no hierarchy.
Dextronet - Aug 8 2012 at 5:55am Copy Link
0
Roberto Jiri: i'll try to disable processes.

Would be great to allow setting some delays from scripting (some java applets that i use require "kind and paused" writing, not only sending "key by key" its paused enought.

for example after each "TAB" i insert a SLEEP 300 miliseconds until the caret travel and make the next entry active.
Aug 8 2012 at 6:33am Copy Link
0
Stephen Kreyling Is there a work around to have text and an image using the rich text editor? I had some text and wanted to add a picture, but the program warns that it will remove all text.

I would like to do a signature with a picture and text.
Aug 8 2012 at 7:05am Copy Link
0
Dextronet Stephen: Yes, you can paste both text and image. Use the Rich Text format, and paste the image inside the rich text editor.
Dextronet - Aug 8 2012 at 7:30am Copy Link
0
Amit Can i use fastpaste also as a launcher for files, folders, websites ?
The script functions seem to be limited for that - i cant find the way to do that.


And does form filling and password entering feature of fastpaste gurantee against capturing of the keystrokes or id and password sent from KEYLOGGERS as well ? or the encryption feature of database is not the thing to save from software based keyloggers monitors ?
Aug 8 2012 at 8:36am Copy Link
0
Dextronet Amit: No, it can't be used for launching files. It is designed for inserting clips.

There are other software products designed for protection against keyloggers - it is not inbuilt in FastPaste.
Dextronet - Aug 8 2012 at 11:17am Copy Link
0
Raymond Jiri, what script commands exist?
Aug 8 2012 at 11:51am Copy Link
0
Jeff Titamer I purchased the earlier version of the software last time it was promoted on here. Is there another price for previous version owners?
Aug 8 2012 at 12:30pm Copy Link
0
Stephen Kreyling Order receipt from BMT Micro, Inc.
Order ID: 5466279

Please advise on license.

Stephen
Aug 8 2012 at 2:58pm Copy Link
0
Brad Cannot Pay though PayPal via the BTMicro Order Summary screen, it just sits there, after I put in my PayPal password it acts likes it wants to login to PayPal to finalize the purchase. But invariably it fails to connect to PayPal. Tried 5 times with no success.

I checked to see if I could login into my PayPal account from another browser window on the same machine and I am able to get into my PayPal account just fine. But when I try to make the purchase through Buy Now it will not complete the purchase.

I kind of liked the program guess I catch it nextime.

Cheers Brad
Aug 8 2012 at 10:58pm Copy Link
0
Dextronet Raymond: You can send keys and key combinations. You can also use several tokens as described in the help file:

1) Token
2) Value
3) Example

%TIME%
Current Time, depends on system format
3:05:35 PM

%DATE%
Current Date, depends on system format
6/4/2012

%USER%
Current User
John

%YYYY%
Current Year, 4 digits
2009

%YY%
Current Year, 2 digits
09

%Y%
Current Year, 2 digits, no leading zeros
9

%MM%
Current Month
06

%M%
Current Month, no leading zeros
6

%DD%
Current Day
03

%D%
Current Day, no leading zeros
3

%HH%
Current Hour in 24h format
13

%H%
Current Hour in 24h format, no leading zeros
13

%GG%
Current Hour in 12h format
01

%G%
Current Hour, no leading zeros
1

%AMPM%
AM or PM depending on time
AM

%TT%
AM or PM depending on time
AM

%II%
Current Minutes
05

%I%
Current Minutes, no leading zeros
5

%SS%
Current Seconds
13

%S%
Current Seconds, no leading zeros
13
Dextronet - Aug 9 2012 at 2:24am Copy Link
0
Dextronet Jeffrey: Either purchase a new 1-user-3-PC-License, or contact us at support [at] dextronet.com and we will send you an upgrade link.
Dextronet - Aug 9 2012 at 2:25am Copy Link
0
Dextronet Brad: As far I know, dozens of PayPal payments were processed in the last 24 hours. Try the whole process with another browser then.

Stephen: You will receive your license code soon - or you've already received it by now.
Dextronet - Aug 9 2012 at 2:26am Copy Link
0
Danny What is difference between FlashPaste and FastPaste?
Aug 9 2012 at 2:56am Copy Link
0
Brad Hi Jiri,

Haven't had an issue paying with PayPal in the past, so it was likely a temporary connection hiccup. I decided to complete the purchase outside of PayPal via my Visa card last night so I wouldn't miss the offer. Nice little program.

Thanks, Brad
Aug 9 2012 at 5:45pm Copy Link
0
Danny A pretty interesting tool! This has a languages interface capabilities as Dutch?
Jan 13 2013 at 1:15am Copy Link
0
Dextronet Hi Danny,
FastPaste is currently in English, but it of course supports all languages (Unicode) for all the clips, scripts and pasted text.
Dextronet - Jan 13 2013 at 2:09am Copy Link
0
Danny I already have several clip boards, and if possession licenses softwares Clipmate Clipdiary and Clipstory. What function (s) this has what others don't have?
Jan 13 2013 at 4:57am Copy Link
0
Dextronet Danny: FastPaste is designed to help you save time, by enabling you to paste frequently used text, rich text and images using global keyboard shortcuts. You can also execute keyboard scripts (e.g. for filling forms). If your current software can't do this, FastPaste might be interesting to you.
Dextronet - Jan 13 2013 at 7:17am Copy Link
0
Danny @Jiri Novotny,

Thanks for your explanation. Am to testing, it is a promising application that are now proves!
Jan 13 2013 at 7:55am Copy Link
0
SoftCollector What is the license policy of this product with regards to duration: 1 year of upgrades, lifetime, etc.?
Jan 15 2013 at 12:53am Copy Link
0
Dextronet Minor upgrades (3.xx) are free, major upgrades are usually paid. Major upgrade likely won't be coming this year, though.
Dextronet - Jan 15 2013 at 1:10am Copy Link
0
Danny @Jiri Novotny,

"Probably" not. But if it is so, than it is for us when we have bought this Deal FastPaste BDJ 3 free, right?
Jan 15 2013 at 1:16am Copy Link
0
Jeff Titamer I bought this the last time it was on sale here and I can't imagine not having the program now. It's saving me lots of pain from repetitive typing due to having carpal-tunnel and beginning to get arthritis too! Thanks for such a great program that's so easy to use and very useful!!!
Jan 16 2013 at 1:04am Copy Link
0
bvssunnydale Hi, does this monitor keyboard activity and expand abbreviations (like Shortkeys, Phrase Express, Typemate) or insert text/scripts based on only predefined keyboard combinations (like ClipCache, or Spartan Clipboard)?
Jan 16 2013 at 3:10am Copy Link
0
Dextronet Hi, FastPaste does not monitor the keyboard activity. It works using the global hotkeys for pasting clips/images/rich-text or executing scripts. And you can setup the global hotkeys beforehand.

For example, the default global hotkey for the first clip is Ctrl+1. You can change it to anything else, too.
Dextronet - Jan 16 2013 at 3:13am Copy Link
0
Dextronet Jeffrey, thank you for your support. We really appreciate it.
Dextronet - Jan 16 2013 at 3:25am Copy Link
0
Ernest Kennedy I purchased this early last year from BDJ and it was my first purchase on BDJ and I love this app for its simplicity of use and the fact that the pro edition encrypts delicate info like passwords, email address's and such like.
Once you get to grips with the way this app works you'll wonder how you can do things like like pasting boiler-plate letters and other texts.
For the encryption capability of the pro edition alone makes the pro edition worth buying.
Enjoy!
Jan 16 2013 at 4:12am Copy Link
0
Mark Johnson Can a hotkey cause a list of choices to pop up?
i.e. you hit a hotkey, and instead of a single text item immediately inserting you get a list of several items to choose from?
Jan 16 2013 at 5:23am Copy Link
0
Dextronet Mark: Yes, this is the global menu. You can set hotkey for it in Options - Hotkeys.
Dextronet - Jan 16 2013 at 5:40am Copy Link
0
MagicTricks.com Downloaded the trial, and I'm very impressed. Before I purchase, though- my wife uses Photoshop on the same computer, and I know she makes use of that program's hotkeys. Do I have to be careful to assign unique hotkeys in your program so they don't conflict with the Photoshop hotkeys?

By the way, your product name is brilliant!
Jan 16 2013 at 9:37am Copy Link
0
Mary Wilson I miss the interface from Fast Paste 2 but it seems all right. Only reason I purchased it was that it was on sale here and that it says that I can put it on a USB. My main complaint is that it does not uninstall the old version.
Jan 16 2013 at 11:13am Copy Link
0
Chris Roy Jackson Jiri, I've been a very happpy user since I purchased the Pro (3 Computer) Version last April with only ONE Exception.
I was wondering if you could make one small change in the installation Process.
(Actually One of two)
Either
1. Change the File Extension for the data File (" .fp ").
OR (I think you'd rather go with this 2nd option)
2. Do NOT Hijack the (" .fp ") extension as a file association during Install. It is NOT Necessary.

The reason I'm requesting this is that for almost 20 years I have been using a program called FinePrint. It's File extension has always been (" .fp "). I need that association when I want to open a saved file from a shortcut (or recent documents).
When I spotted the problem, I went into File Associations and changed the reference BACK to FinePrint, and now it works fine WithOUT ANY adverse Effect in FastePaste.

Again I LOVE this Software and recommend it to everyone I know. I purchased it here last April 15th and never looked back.
Thanks for a great product Jiri !!!
Jan 16 2013 at 11:38am Copy Link
0
Dextronet Hi MagicTricks. I recommend using unique hotkeys - but it is necessary only if you want to run FastPaste all the time. If you have your own user account, you don't need to worry about this at all. If you share it with your wife, just full exit FastPaste before you leave the computer.
Dextronet - Jan 16 2013 at 12:08pm Copy Link
0
Nico Westerdale Great News! Dextronet has agreed to extend this deal for another day - Enjoy!
BitsDuJour Admin - Jan 17 2013 at 12:11am Copy Link
0
Danny What is the percentage price upgrades for the future?
Jan 17 2013 at 6:48am Copy Link
0
bvssunnydale Hi, can the global menu be set by program, for example one global menu for "Wordperfect" and another for "Excel"? or can there be multiple global menus that the user can define?
Jan 17 2013 at 8:04am Copy Link
0
Dextronet Major upgrades are usually discounted by 40-60%.

There is only one global menu, but you can bring up FastPaste with a hotkey, then switch to a different set of clips (project) with a hotkey, and you will get a global menu for the newly opened project.
Dextronet - Jan 17 2013 at 8:09am Copy Link
0
Steven Avery How about a full - Mouse, no keyboard option to accomplish the same end. Using some sort of launch point, etc.

Steven
Jan 17 2013 at 10:18pm Copy Link
0
Dextronet Steven: 1) It is possible to use mouse only. That's what the notification area icon, or the Copy buttons are for.

2) The scripts have various uses. You can use them to fill forms, send series of shortcuts, or enter current date in specific formats, log-in into applications and websites, and more. Encryption is hand you you have sensitive data in your database.

3) Is the clip's format "Image"? Also, please note that not all applications can have images pasted into them (e.g. Notepad).
Dextronet - Jan 18 2013 at 2:11am Copy Link
0
Noggin The Nog What functions are available for use in the creation of 'scripts' in the pro edition? Could I for example have a script that would create a new email in outlook as well as add to that email the usual salutation, valediction, etc.
Jul 25 2013 at 2:36am Copy Link
0
Dextronet Noggin The Nog - You can use regular letters and numbers in the scripts. Any text you type into the script, the script will send key-by-key when executed.

Beside the regular letters, you can also utilize token codes.

There are 2 kinds of tokens: Keyboard tokens, and time/date tokens.

Keyboard tokens represent keys on your keyboard. For example, the token {ENTER} represents the Enter (Return) key.

The answer is yes, you could create a script that would create a new email in Outlook as well as add text to the email.
Dextronet - Jul 25 2013 at 2:59am Copy Link
0
Noggin The Nog Here is my attempt at a script to create a new email with some standard stuff in, not knowing how to work the program. I could do with some help here, rather than having to grope around the program.

{CONTROL} {SHIFT} m
Dear ,
{ENTER}
{ENTER}
Thank you for your email (of which a copy is attached).
{ENTER}
{ENTER}
{ENTER}
With kind regards,
{ENTER}
yours sincerely,
{ENTER}
{ENTER}
{ENTER}
My Name
Jul 25 2013 at 3:14am Copy Link
0
Dextronet Noggin The Nog - just add a few {TAB} tokens and I believe it will work. The tab tokens are there to go through the To, CC, and Subject fields (you can add text between the {TAB} tokens if you want the script to also fill the above fields.

Do not hesitate to contact me via mail or the built-in contact form, if you require further assistance.

---

{CONTROL}{SHIFT}m
{TAB}
{TAB}
{TAB}
Dear ,
{ENTER}
{ENTER}
Thank you for your email (of which a copy is attached).
{ENTER}
{ENTER}
{ENTER}
With kind regards,
{ENTER}
yours sincerely,
{ENTER}
{ENTER}
{ENTER}
My Name
Dextronet - Jul 25 2013 at 3:54am Copy Link
0
Noggin The Nog Ps I had first tried to start with control, shift, m, which worked, and then simply added in the text I wanted, which did not work, and neither does the above work, which replaces each line space with {enter}. So what do I have to do to get this to work?
Jul 25 2013 at 3:56am Copy Link
0
Dextronet I just tried it and it works for me. Please follow these instructions:

In FastPaste edit the first clip.

Set the clip Type to Script.

Insert there the script with {TAB}s from the post above.

Press OK (the edit window has to be closed for the clip to work).

Open Outlook and press the Global Copy Hotkey for the first clip (Ctrl + 1) by default.
Dextronet - Jul 25 2013 at 4:32am Copy Link
0
Noggin The Nog Thanks Jiri.

There seems to be some other problem.

I have gone back to the beginning and created a new script - {ctrl}{shift}m - but it only works occasionally, whereas the same done from the keyboard always seems to work to open a new email in outlook.
Jul 25 2013 at 4:47am Copy Link
0
Dextronet It should work every time, unless the Edit window for the corresponding clip is open.

The can't activate last active application message appears in scenarios where the clip can not be pasted to the last active application (if auto-paste is active). If you open outlook and press the clip's global copy hotkey, there shouldn't be any problem.
Dextronet - Jul 25 2013 at 5:04am Copy Link
0
Noggin The Nog But it works in fact only occasionally. Also, if I use the hotkey to run the script - ctrl 1 - I get different message - "Cannot paste into this application".
Jul 25 2013 at 5:12am Copy Link
0
Dextronet It pastes the script to the currently active application (window). I believe you get the Cannot paste into this application message when you're trying to run your script when FastPaste window is active.
Dextronet - Jul 25 2013 at 5:15am Copy Link
0
Noggin The Nog I think you are right. Thank you. It works now. It should be a most useful tool for creating new emails and word documents, using hotkeys, tokens etc to enter things like current date etc

Is it possible to paste a section of text or html into a script by selecting at the point of insertion the text or html button, instead of having to type it all in with scripted {enter} commands? In other words, can you select different modes at different points in the clip?
Jul 25 2013 at 6:06am Copy Link
0
Dextronet That's not possible as the script is send key-by-key when executed.

However you can create another clip with Rich text formatting.
Dextronet - Jul 25 2013 at 6:58am Copy Link
0
Noggin The Nog Is there any way of getting word to align right and then insert the current date in the format of 25 July 2013, and then align left again?
Jul 25 2013 at 7:06am Copy Link
0
Dextronet Yes, the aligning is easily done in the WYSIWYG editor for Rich Text clips, however not on the same line. You can formate the text as you would in Word.

If you use the %DATE% token it will insert the date in your system format. You could also use %DD% %M% %YYYY% but you would get 7 instead of July. You can currently get FastPaste to write the month as a word only if you set your default Windows format to that - or change the clip manually at the beginning of each month to write July/August etc.
Dextronet - Jul 25 2013 at 10:51am Copy Link
0
Noggin The Nog Do you mean that it cannot easily be included in the script clip?

My system long format date is fine, but word uses the short format instead of the long. How do I get it to choose the long format?

Writing a new key into the registry as described in http://support.microsoft.com/kb/134910 did not seem to help. And word appeared in office 12 not office 8.

I could use the %Date% token, but that invokes the short date format, and requires me to use both script and copy clips.

Alt+Shift+d inserts the date in my long format, which is fine, but Control+R, which according to http://office.microsoft.c...47626.aspx should Switch a paragraph between right-aligned and left-aligned does not seem to apply so as to right justify the date field.

Where now?
Jul 25 2013 at 11:56am Copy Link
0
Dextronet The %DATE% token works in both, the Rich Text and Script clips.

I think for Word Alt+Shift+D = CTRL+R = ENTER = CTRL+L is what you're aiming for.

If you require further assistance, please contact me via email (or use the support contact form in FastPaste). I believe this is not the right place for this kind of conversation.
Dextronet - Jul 25 2013 at 12:29pm Copy Link
0
Noggin The Nog Ok - I'll email you.
Jul 25 2013 at 12:47pm Copy Link
0
Fadi I have fast paste standard, can I upgrade to the pro version with this discount?
Jul 26 2013 at 3:58am Copy Link
0
D I downloaded your trial but it's not grabbing anything from the clipboard; i.e. ctl+v doesn't put any text into FastPaste but it is on the clipboard. The only way I can get text into the FastPaste app is by manually pasting them there. This can't be the way it's supposed to function. FastePaste can pull from the clipboard, right? I'm on Win 7 Pro and downloaded the latest trial. I also tried restarting and reinstalling the trial.
Jul 26 2013 at 12:54pm Copy Link
0
Dextronet Fadi - No, this promotion is only for new licenses. Please contact me via mail or our support form regarding upgrades.

D - I'm not sure I understand what you're trying to accomplish. FastPaste is a clipboard utility that allows you to quickly paste predefined clips (text, images, rich text) using a hotkey into any Windows application. You have to set-up the clips first. You can also create scripts in FastPaste.
Dextronet - Jul 26 2013 at 2:25pm Copy Link
0
D So it isn't able to grab clips from the clipboard history? If it had that additional functionality I would definitely buy it. As is, it looks interesting but there are so many other applications that actually interact with the built in clipboard as well as allowing for predefined items. Thanks for responding!
Jul 26 2013 at 6:24pm Copy Link
0
Dextronet You can check FastPaste's features here - http://www.dextronet.com/...e#version3

You're right, it doesn't let you grab clips from clipboard history.
Dextronet - Jul 27 2013 at 12:16am Copy Link
0
Roderick Nicolson Going back to the last conversion, why do you call FastPaste a clipboard extender if it has nothing to do with capturing information from the clipboard? In what way then does it actually extend the clipboard?
Jan 8 2014 at 1:51am Copy Link
0
Dextronet Aside from the clips, FastPaste also has tools that you can use to work with the text in your clipboard. That could be called a clipboard extension. For example you can turn the text in your clipboard to upper/lower-case, remove diacritics, reverse text, capitalize words, make sentences or insert time/date into your clipboard.
Dextronet - Jan 8 2014 at 2:05am Copy Link
0
Roderick Nicolson Thanks.
Jan 9 2014 at 12:45am Copy Link
0
John Van Hulst It does not seems to copy hyperlinks across. Am I doing something wrong?
Jan 10 2014 at 7:14pm Copy Link
0
Nico Westerdale Great News! Dextronet has agreed to extend this deal for another day - Enjoy!
BitsDuJour Admin - Jan 11 2014 at 12:11am Copy Link
0
John Van Hulst Hyperlinks? Please respond
Jan 11 2014 at 4:32am Copy Link
0
Dextronet No hyperlinks in clips.
Dextronet - Jan 11 2014 at 4:54am Copy Link
0
Thriyambaka Nota A software called Phrase Express is a freeware and does this free.
Jan 11 2014 at 11:34am Copy Link
0
Ralph Bressler The only PhraseExpress I could find was not freeware and costs about $50! I suppose the name is pretty generic but I could not find a free version. There are a number of good program some of which are free and many of which are commercial that perform the same function. This is one of the best in my opinion.
Jan 11 2014 at 5:56pm Copy Link
0
Jaap Aap Just trying this out. I was expecting there would be a simple way to fill the project entries (say from a text editor) by just copying phrases to the clipboard in sequence, but this does not seem to be the case?
Jun 27 2014 at 5:08am Copy Link
0
Dextronet You have to paste the copied text into the individual clips in Fast Paste, there is currently no way for the clips to automatically pickup phrases from the clipboard.
Dextronet - Jun 27 2014 at 9:56am Copy Link
0
Gabriel Zastawnik Hi guys. Can you tell me if your program suffer from "break clipboard chain" problem ie. when bad written application from another vendor is run and clipboard chain is destroyed?
Jun 27 2014 at 10:16am Copy Link
0
Dextronet Possibly, however you can prevent that by changing settings. If you go to menu Options - Options - Pasting, you can change the pasting method to Key by key (emulate typing) and the clipboard isn't utilized then.
Dextronet - Jun 27 2014 at 11:19am Copy Link
0
Matt Spam?

Lexa Imqerov's only three comments on BDJ, (two of them on Dextronet's pages), have all been links to Ami Pages.
Jun 28 2014 at 8:49am Copy Link
0
Jaap Aap When using the standard version as a trial I can edit a script but then get all kinds of nag screens when trying to use it, telling me to update to the pro version -can't even delete the non-functioning script. Will this annoying 'feature' be removed when using a non-trial version and will the whole script editing part (and the encryption) just be taken out of the menus and toolbars?
Jun 28 2014 at 9:27am Copy Link
0
Dextronet If you click the edit button in the clip with the script, it should ask you if you want to delete the script.

If you try to add a script in the standard edition, it will ask you if you'd like to upgrade.
Dextronet - Jun 28 2014 at 9:38am Copy Link
0
Jaap Aap Thanks for that fast reply Jiri. I am afraid that I am not offered the option to delete the script, only the 'you can't edit scripts, would you like to upgrade' screen comes on. While I understand that you want to inform users on the option to upgrade, leaving the disabled options active in the menus and toolbars to me really gives the SW a 'shareware' feel. Just my 2 cents, I do like the application and the clarity of the interface BTW.
Jun 28 2014 at 9:48am Copy Link
0
Dextronet After clicking Edit and then selecting No in the 'you can't edit scripts, would you like to upgrade' dialog you're asked if you want to delete the script.
Dextronet - Jun 28 2014 at 9:50am Copy Link
0
Steve M. Like Jaap Aap, I would also like automatic clip archiving (call it "Fast Copy"). I would also like the ability to have more than 30 clips per projects. I've been using the freeware Clipboard Magic and it allows both.

Unfortunately, Clipboard Magic only supports plain text, so no Rich Text, no images and no scripting.

I'm considering FastPaste, but I don't want to lose function, especially if I'm paying. If FastPaste had that Fast Copy option (maybe an "auto-capture" project) and the ability to define the size of my projects, you might have a buyer.
Jun 28 2014 at 1:20pm Copy Link
0
Petr Hello Jiri,
Are you saying that pressing Ctrl-C does not load the selected text to FastPaste? If I want to utilize FastPaste, I would do as follows:
#1. select text, graphics, rich text or URL
#2. Use Ctrl-C to copy to clipboard
#3. open FastPaste, create a new 'item' and usDe Ctrl-V to paste to the new item in FP

Can you direct me to a video showing how it is used. I don't like installing trails on my main computer. I just want to understand it's use before deciding if I want to purchase.

If I buy the 3 PC license, is there a way to copy my FP library or database to another PC easily?

How else does FP differ from a Clipboard Manager utility?
Thank you
Jun 28 2014 at 2:55pm Copy Link
0
Dextronet Steve, you can create hotkeys to switch between different projects (up to 10) so you can basically have 300 clips accessible via shortcuts.

Petr, Ctrl+C loads the text into Clipboard and you can do a few operations with it (reverse, lower/upper case, capitalize, make sentences) using FastPaste. However if you wish to store the text in a clip, you have to open FastPaste (you can do so using a global hotkey) and paste it into a clip. You don't have to create clips, these are already there, like you can see on the first screenshot above.

You can easily move your clips between computers. Simply move the project file to another computer (or use Dropbox) and open it.

I don't know which Clipboard Manager you want to compare FastPaste to, however you can also have rich text and images in your clips. If you decide to go with the Professional edition you can create scripts. You can create a script that will for example open Outlook, create a new email and write the subject and email body, all with a single press of a shortcut triggering the script.
Dextronet - Jun 29 2014 at 10:56am Copy Link
0
Petr Jiri,
Thank you for answering my questions. Although, now the deal has expired. I am interested in the FastPaste 3 Professional 1-user-3-PC Pack. Can you extend the deal?

Peter
Jun 29 2014 at 11:47am Copy Link
0
Matt Hi Jiri,

Can FastPaste 3 be used to paste a 'long' time and date format such as:

8:30 AM Friday, March 13, 2015

I would really like to be able to paste the day and month names. I tried experimenting with the tokens but couldn't see a way to do this.

If not, could this be an option you can add in the future?

Thank you.
Mar 13 2015 at 6:36am Copy Link
0
Fadi Does FastPaste support Drag and Drop?
Mar 13 2015 at 8:56am Copy Link
0
Dextronet Fadi, no, you can't drag and drop things to FastPaste. You can of course use the clipboard though.
Dextronet - Mar 13 2015 at 10:35am Copy Link
0
Dextronet Matt, there is currently only the short date format token. You could change your short date format in Windows to a long date via the Region and Language settings, but then it would be used everywhere.

A long date token would come in handy, it's certainly something we can add.
Dextronet - Mar 13 2015 at 10:41am Copy Link
0
Matt Thanks Jiri. I will be purchasing soon.
Mar 13 2015 at 2:55pm Copy Link
0
Steve M. The description is confusing. The main FastPaste page lists encryption and scripts as if they're part of the Standard edition, but the editions page implies that encryption and scripts are only in the Professional edition.

Which is it?
Mar 13 2015 at 11:43pm Copy Link
0
Dextronet Scripts and Encryption are only available in the Pro version.
Dextronet - Mar 14 2015 at 1:48am Copy Link
0
singularity Is this a clipboard manager too? That saves all that is copied? Or a tool to manage favorite and commonly used clips?
How is the license designed? For an year or for all version 3?
Mar 14 2015 at 4:05am Copy Link
0
Dextronet The license is for life time (for version 3).

FastPaste isn't a clipboard extension tool, it doesn't save clipboard history.
Dextronet - Mar 14 2015 at 6:25am Copy Link
0
Chris Roy Jackson All I can say is GET it !!!
I've been using this for about 2½ years now and I'm VERY happy with it!
FYI: Then current Version is v 3.131
and I started with version 3.03 ( FastPaste 3 Professional 1-user-3-PC Pack @ $35.98 ), so it is highly unlikely that you will be "pushed" into a new version upgrade purchase anytime soon!
The program has several hotkeys available and allows for multiple "Databases", so that you could switch Databases for different purposes, languages, etc. (Use your imagination!
NO !!! I have NO relationship with the creator... just a satisfied customer!

By-the-way ( for the Jiri ):
I haven't upgraded to Windows 10 YET... Will this current version function well on the Windows 10 Platform ???
Thanks to Jiri and Bits for a GREAT Product !!!
Oct 29 2015 at 2:06am Copy Link
1
fpi fpi http://www.dextronet.com/...change-log
The current version is: 3.14 (Feb 17, 2015)
The previous version was: 3.131 (Mar 06, 2014)
The version: 3.03 (Apr 11, 2012)
The last Major Upgrade: 3.0 (Mar 02, 2012)
Upgrades to future versions of the software will be free for minor versions only.
The version 4.0 (Major Upgrade) is awaiting for ?
Oct 29 2015 at 2:46am Copy Link
0
Dextronet Chris, thanks - you shouldn't have issues using FastPaste on Windows 10.

fpi fpi, we currently have no plans for version 4. FastPaste currently isn't our priority.
Dextronet - Oct 29 2015 at 3:50am Copy Link
0
Chris Roy Jackson Jiri, For some reason My "Check for Update" shows that I have the "latest version". So should I just download the "Trial Version" from your site ( http://www.dextronet.com/fastpaste.exe ) and it will recognize my License ???
Thanks again!
Oct 29 2015 at 4:52am Copy Link
0
Dextronet I'm not quite sure I understand, perhaps you could contact me on our support email.

If it says you're on the latest version, you most likely are.

There are no separate full/trial version installations. The trial is fully functional, the 30 day trial limit is removed once you enter your license. So you can simply download FastPaste from our website.
Dextronet - Oct 29 2015 at 6:36am Copy Link
0
Tim Parsons How is this better than (say) PhraseExpress (free, portable) or ClipboardHelpAndSpell (donationware, portable)? Not trying to be confrontational here, genuinely interested in what this brings to the table that's particularly helpful or useful.
Oct 29 2015 at 7:14am Copy Link
1
Chris Roy Jackson @Tim Maybe someone else can compare... I'm NOT familiar with those programs.
Oct 29 2015 at 9:04am Copy Link
0
wts Jiri, I use some old programs at work such as Paradox for DOS that live in Cmd under various versions of Windows. Can FastPaste directly copy/paste between a DOS program running under Cmd.exe and normal Windows programs? Thanks.
Oct 29 2015 at 9:10am Copy Link
0
Dextronet Tim, I don't really know these programs. Nevertheless FastPaste can also be fully portable. You can see FP features here: http://www.dextronet.com/fastpaste

Perhaps the other programs don't allow you to create scripts? From a quick glimpse they have some extra features, and miss some that FP has, so it really comes down to what you're personally looking for and which software allows you to do it in the most convenient way for you.

wts,FP doesn't allow direct copying/pasting from anywhere. FP allows you to paste clips, which you have to create first.
Dextronet - Oct 29 2015 at 10:14am Copy Link
0
Kimmo Lahtinen I looked and PhraseExpress is terrible expensive, but there seems to be little more features. Also the other one is not free for office use.
Oct 30 2015 at 12:02am Copy Link
0
MK I have FastePaste and PhraseExpress Pro.
PhraseExpress is a lot more powerful (e.g. you can copy field codes from MS Word and add them to PhraseExpress, and PhraseExpress will retain the formatting for field codes when you later past them into Word. So a refresh in Word and the fields update. Tables, Figures, etc., are so easy to add and automatically number).
Downside is PhraseExpress is a lot more expensive and a bigger memory overhead.
So I keep FastPaste running for quick stuff; and PhraseExpress for more complicated stuff like technical authoring.
You pays your money...
Oct 30 2015 at 10:11am Copy Link
0
Joe M Kimmo. Look for the FREE version of PhraseExpress. I have been using it for years with good results. You don't really need the paid version. I will get a notification about minor updates about 2 to 3 times a month.
Oct 30 2015 at 1:19pm Copy Link
0
Robert Crombie I wrote my clipboard program years ago with VB6. It is called "ClipBuddy"
I even have the domain (www.ClipBuddy.com) which I have never used
Never got around to selling the program (my middle name is Lethargy)
However I use it all the time.
I perused your screenshots, and you do not appear to have an important feature (may I say vital feature) -
The ability to click a stored clip, and your program gets out of the way (returns to where it came from), and pastes the clip into the textbox (or whatever) on the active form.

Just sayin,
Rob
PS The program does not require installation. You just put it into a folder such as C:\ClipBuddy\
Oct 30 2015 at 10:06pm Copy Link
0
J Hello,

It seems like there might be a problem with the current version (3.14).

When I check for updates, it says that there is a new version available:

Current Version: 3.14

Latest Version: 3.14

Released on: 2/17/2015

The 'Download Update' button is enabled, allowing you to download the 'new' version, which is the same as the current version.

Thank you.
Mar 9 2016 at 7:43am Copy Link
0
Petr I have your Swift To-Do list and am impressed with your very thoughtful use of hot-keys and improvements to work-flow with minimal effort. Very intuitive software.

For this reason, you have my interest in today's deal for FastPaste. I would appreciate your answers to my pre-sale questions below:

Q1: Does FastPaste have a "history of my Clipboard" feature? I would like to view and re-use items I've previously had in my clipboard.

Q2: I currently have Windows 8.1 Pro. I will be upgrading to Windows 10 Pro soon via in-place upgrade (Microsoft's free upgrade). Can I leave FastPaste and Swift-To-Do-List installed such that the Win 10 upgrade will not be affected (and FastPaste + Swift TDL continue to operate)?

Q3: Is the 1 User Pro for FP just for one of my own PCs? Or, do I need the 1-user-3-PC package for more than one of my own personal machines?
Mar 10 2016 at 8:00am Copy Link
0
Dextronet Hi Petr,

Q1: No, FastPaste doesn't keep a history of your clipboard.

Q2: Our software is fully supported by W10.

Q3: Yes, a single license is for 1 user and 1 computer. Unless it's the 1-User-3-PC Pack.
Dextronet - Mar 10 2016 at 8:33am Copy Link
0
J Hello Jiri,

Could you please respond to my comment above?

Thank you.
Mar 11 2016 at 5:00am Copy Link
0
Dextronet Hi J,

yes, it seems that even if you're on the latest version 3.14 the updater says 3.14 is available.

Thank you for bringing my attention to this.
Dextronet - Mar 11 2016 at 6:49am Copy Link
0
Frank E. I missed your sale. Will you be offering this again soon?
Thank you,
Frank
Mar 12 2016 at 2:54am Copy Link
0
J Thanks Jiri!
Mar 12 2016 at 3:19pm Copy Link
0
Petr Hi Jiri, I purchased your FastPaste while it was on sale. It's great and complements your other software on my system (Swift Todo List). But, I can say I'm missing a feature in FastPaste. Please add this to your list of future features for FastPaste:

#1. Clipboard History to enable auto-adding 'Copied' or 'Cut' items to an editable history.

#2. Paste from History or from FastPaste items.

Alternatively, if you are not adding these features, can you recommend a Clipboard Manager that is compatible with FastPaste3 ?

Thanks.
Mar 12 2016 at 5:40pm Copy Link
0
Dextronet Frank, FastPaste should be on BDJ again this year, but not too soon.

Petr, thank you for the suggestions.
Dextronet - Mar 13 2016 at 12:11am Copy Link
0
brenda adams Gee, it's a great program. I bought it March 2015 when it was offered here at Bits.
I'm hoping that it will be on sale again. I'd like one more copy of it.
Please?
May 4 2016 at 12:15am Copy Link
0
CFGuy Hi- this program looks like it offers some excellent features at a very good price-point. My question is: I am a current, longtime user of the Thornsoft companies' "ClipMate" clipboard program, which although very robust, does not offer some of the nice features that "FastPaste 3" does. Can the 2 programs be used together, at the same time, or would there be conflicts and interference between the two? If you would please let me know, I would really appreciate it. Thanks so much for your help with this. -CFGuy.
Oct 6 2016 at 4:48am Copy Link
0
Andreas Hoffmann Hi CFGuy, long-time user of ClipMate, too, and still like it. And no problems using FastPaste simultaneously. You have keep in mind that global hotkeys can be used only for/in one program.
And FastPaste is a fine program, like it since I bought it here in 2012.
Oct 6 2016 at 7:03am Copy Link
0
Ivo Stika I am using shortkeys as I can define shortcuts for every phrase (xby followed by enter expands to "Sincerely,"
I have bought fastpaste as well, it is suitable for longer text template pasting.
Oct 6 2016 at 7:30am Copy Link
0
Roger Fine I have been looking for software with just these features. I tried out the trial and was very pleased with all the features. I ordered the $11.98 version above not realizing that some features were missing that are in the Pro version. I requested a refund and less than 20 minuets later is was issued the refund. I have purchased the Pro version and it is great!

I was quite frankly shocked by such great customer service! I have purchased a lot of software over the years and never had such prompt and courteous service!
I'm impressed.
Oct 6 2016 at 9:43am Copy Link
0
twm One of the concerns for users is that it only supports Windows 7 libraries.
Why hasn't the developer re-compiled the software with the latest libraries used by Windows 10?
Oct 6 2016 at 10:48am Copy Link
0
Dextronet twm, I don't think I understand your concern. FastPaste runs on Windows 10 without any issues.
Dextronet - Oct 7 2016 at 1:13am Copy Link
0
SoftCollector The difference between standard and professional? Anything with a lifetime update?
Apr 14 2017 at 10:46am Copy Link
0
Robert Crombie I am trying the Trial before purchasing. Two questions -
1) Can I toggle Capture ON/OFF ?
I do not wish to capture remember everything all the time. If I am about to capture something that I feel is "Storing Worthy", I would like to Toggle capture on. I would probably Toggle capture off straight after. If you really wanted to please me, a Toggle for single capture only would be terrific.
2) Can we control where the database of clips is stored ?
I would like to do this for two reasons -
So I can keep an eye on the size of the file(s)
So I can back them up
Apr 15 2017 at 12:44am Copy Link
0
Dextronet SoftCollector, the Professional edition allows you to create and run scrips, and also to encrypt your database.

Robert, FastPaste doesn't capture anything automatically.so I don't think I understand your capture question. You can create as much databases with clips as you like and you can store them wherever you like, you can also get a fully portable version of FastPaste and carry it with you.
Dextronet - Apr 16 2017 at 12:24am Copy Link
0
PeterLi Another abandonned Dextronet software title
Only Swift To-Do List has their priority
Jul 17 2018 at 5:36am Copy Link
1
Barnet I have been using FastPaste for over 8 years both version 2 and up to the current 3.14. While there has not been a recent update, I have not missed any feature. What I like is the simple and efficient program that just works as it is. If it fits your needs it is perfect.


Also, Jiri, if you do update FastPaste, please do not screw up the platform! :)
Jul 20 2018 at 10:55am Copy Link
2
Alexandre Emeriau It's deprecated, last release in 2016
Jul 21 2018 at 4:12am Copy Link
0
. zyria After reading a comment from 2011: "FYI: last version update Dec 1, 2008", the time between releases doesn't bother me.

Buying a title that is long in the tooth and then having to pay for a new version soon after (within 1 year) does bother me (happened to me twice).

With that in mind:
- Will those of us purchasing today be able to upgrade to v4 as part of the purchase?
- Do you offer a lifetime upgrade option?
Jul 21 2018 at 11:01am Copy Link
0
William Henry Is this similar to the old NetSnippets program, where whole web pages or parts of web pages can be "snipped" and edited using WYSIWYG?
Jul 21 2018 at 5:08pm Copy Link
0
Dextronet Hello, FastPaste is our most stable product so we didn't have to release any new fixes etc. It's true that Swift To-Do List is our main priority, but we are ready to provide an active support to any of our core products whenever it's needed (FastPaste being one of them). So while there were no new features for some time, we think it's safe for you to purchase the software if you like what it does. Thank you!
Dextronet - Jul 22 2018 at 1:15am Copy Link
0
Felix User FastPaste needs Microsoft .NET Framework 3.5 to install and run.
It is Inpossible to install Microsoft .NET Framework 3.5 on my windows 10 pro.
I tryed to install it via DISM. But nothing goes ! Error 3 and 2 !
So Fastpaste can't run on Windows 10 ?
Jan 4 2019 at 2:40pm Copy Link
0
Nico Westerdale Great News! Dextronet has agreed to extend this deal for another day - Enjoy!
BitsDuJour Admin - Jan 5 2019 at 12:11am Copy Link
0
Dennis McKay @Felix User You can't install .NET framework 3.5 because it is part of Windows 10 Programs and Features. When you open Programs and Features in control panel select Turn Windows Features On or Off and there is the .Net Framework 3.5 (includes 2 and 3). You will need to be logged on as an Administrator.
Jan 5 2019 at 8:51am Copy Link
0
Felix User To Denis. Loged on as Admin : Control Panel>Programs>Turn Windows features on off-> X Net FW 3.5 (includes 2 and 3) => Windows need to reboot->Restart now |
fastpaste.exe=>need FW 3.5=>install this feature=>reboot |
Always the same!?
I don't know how to install/activate this Framework 3.5!
Jan 5 2019 at 10:28am Copy Link
0
William Henry Can this product edit "snippets" cut from websites into HTML format?
Jan 5 2019 at 10:46am Copy Link
0
Dennis McKay @Felix User Sometimes You have uninstall the software package that requires the updated .NET because it sets a key that looks for something. I would recommend using RevoUninstall Pro Trial (unless you own it) to uninstall Fastepaste since it will search for registry keys and leftovers after uninstalling. Then check Features to make sure it shows FW 3.5 installed. Reboot and install Fastpaste. If that doesn't work you may have a problem with Windows 10. I don't run 10, removed it from all my computers, even the new ones I just bought. I have been running Windows since version 1.03 and 10 is the absolute worst, IMHO.
Jan 5 2019 at 12:10pm Copy Link
0
Dextronet @Felix User, please try uninstalling and reinstalling FastPaste as @Dennis McKay suggests after you've added the .NET Framework 3.5 support into your system. Thanks @Dennis McKay!
Dextronet - Jan 5 2019 at 11:11pm Copy Link
0
Dextronet Hello @William Henry. No native support for HTML parsing. Sorry!
Dextronet - Jan 5 2019 at 11:12pm Copy Link
0
MK I've been trying quite a few clipboard managers recently, and have came back to FastPaste 3. I have PhraseExpress and PhraseExpander also, but these are heavyweights with a heavy cost. Something quick just to drop in frequently used phrases, in formatted Rich Text.

There are cheap and also free managers out there, but I like FastPaste's approach.
You can have as many "project" files as you need. And you can have up to 10 favourite files quickly selectable from the menu icon bar. So switching between files for specific uses is quick and easy. And you can have up to 30 clips in each project file.

Clips can be plain, rich text, script and images. Hotekys can be assigned to clips too. You can select a clip from within the main window, or Ctrl+Shift+V makes a pop-up window appear beside your cursor, with a menu of clips to quickly select from.

Downsides: you can't mix Rich Text + images in the same clip.

In Swift-To-Do (by Dextronet who make FastPaste) the Rich Text editor can support MS Word field codes. But FastPaste does not. So if you want to insert a clip with a formatted table and Table caption, MS Word won't see the Table as being a caption and so won't number it accordingly. (Same with other field codes, e.g. it doesn't recognise field codes from EndNote, whereas Swift does).
Use the same Rich Text editor used in Swift To Do that can handle MS Word field codes, and FastPaste would be great.
Jun 26 2019 at 5:26am Copy Link
1
Jon Spain The website includes Windows 10 but BdJ promotion doesn't?
Jun 27 2019 at 1:20am Copy Link
0
Karl M. @MK: Thank you for your post.
Have you ever tried the free clipboard manager Ditto? If yes, are there any advantages of FastPaste over Ditto?
Jun 27 2019 at 3:01am Copy Link
0
MK @Kark M: Yes, Ditto is very good. But I did not like the way the view of the Group disappeared after a clip was used and you had to View Groups again (although there is quick hotkey to show it) . FastPaste "groups" by project file which can be quick accessed by menu icon (a drop down menu showing project file would have been better).
Also Ditto editor is very small on a 3200 x 1800 laptop, whereas FastPaste looks fine.
If you want something for free, Ditto is highly recommended.
Jun 27 2019 at 12:27pm Copy Link
0
bvssunnydale Hi, according to the FP website, there's been no development since Oct 2016 [the current version was released then] - is this an ongoing project or is it in limbo? Thanks much.
Jun 27 2019 at 1:06pm Copy Link
0
Dextronet Thank you all for your questions. We have some updates prepared for a new release and the product is covered by our 24-hour support. FastPaste is compatible with Windows 10.
Dextronet - Jun 28 2019 at 1:41am Copy Link
0
Robert Crombie Do you have a web page showing comparison between Standard and Pro versions ?
Is the download of a Trial, for the Pro version ?
Jun 28 2019 at 2:49am Copy Link
0
Steven Avery Amazing. I did a new download and went to register my 2013 Bits and FastPaste said:

Success! FastPaste has been successfully unlocked. Thank you for your support, Steven and have a great day!

Did I even have this puter in 2013? Anyway, I was pleased overall. I have a valid Pro licence for 3.18 (2013 was 3.03) for one puter.
Jun 29 2019 at 12:01am Copy Link
0
Bertie Brummel Checked their website: Last Update dates Oct 2016. Dead project?
Dec 25 2019 at 2:25pm Copy Link
2
Daniel User What a bad idea to refer the webpage ... Version 3.16 as of Oct 2016. OMG. Three years not even maintenance.
DEAD project, just a nice webpage to gain as much dollars as they can.
I will not use this app even for free. But to ask $12 or $30 is just shamefull.
Sorry to be straight - but this is an extremely bad deal proposition
Dec 26 2019 at 2:13pm Copy Link
2
HJ User There are modifications that improve software and their are modifications that fix bugs The fact that software has not been modified for a few years does not, in itself, mean that the software is of poor quality. Maybe, just maybe, the software does what it says it will do. If so, it may be for the best that it is not going through modifications of style or substance. The old adage is "If it's not broke, don't fix it".

I do not use this program, but I wish that those who complain about there not being any updates would specify what kind of update is warranted and why.

HJB
Dec 26 2019 at 6:12pm Copy Link
2
Nico Westerdale Great News! Dextronet has agreed to extend this deal for another day - Enjoy!
BitsDuJour Admin - Dec 27 2019 at 12:11am Copy Link
0
Brenda Adams The program works fine. I've had it for years (and just recently upgraded to Pro version). WHO CARES ABOUT FIXES AND UPDATES IF THE PROGRAM WORKS JUST FINE AS-IS? SHEEEESH! It's a good program at a good price so...be happy! :)
Dec 27 2019 at 1:29am Copy Link
2
MK Correct @HJ User. Some people seem to need to have faux outrage over trivial things. FastPaste works under Windows 10 x64, and works well. For someone to state they would "not use this app even for free" is just churlish.
Dec 27 2019 at 3:08am Copy Link
2
Dextronet Hi all! It's been some time since we've released the last maintenance version but what can I say, the software simply works. We've fined tuned it, it's got a great code base which makes it stable and compatible even with the latest Windows versions. Of course, the software is covered continuously by our highly-rated support.
Dextronet - Dec 27 2019 at 12:32pm Copy Link
1
Konarsky The domain dextronet.com does not even have an SSL certificate...
Jan 2 2020 at 7:41pm Copy Link
1
bvssunnydale Hi, I'd like to purchase the PORTABLE pro version so I'm wondering if that's the same as the "FastPaste 3 Pro" version listed above? Thanks.
Apr 16 2020 at 9:29am Copy Link
0
Dextronet Hello @bvssunnydale. Yes, the portable version is included in FastPaste 3 Pro.

Also yes to your second question. With the Pro version, you can setup a macro that can do the steps you need in Excel.
Dextronet - Apr 16 2020 at 11:50am Copy Link
0
Brenda Adams [Scrambling around to see if I already have this version or not.] :) Nice program!
Apr 16 2020 at 12:37pm Copy Link
0
MANOEL User quero comprar com 60% desconto perdi a promoção
Apr 20 2020 at 7:12pm Copy Link
0
Constantin Florea @MANOEL User, I am sorry but the promotion with the discount you mentioned ended 4 days ago. Once a promotion ends, we can't bring the same discounted price so soon.
BitsDuJour Admin - Apr 21 2020 at 4:39am Copy Link
0
Cary Adams Clipdiary does this (and more) for free (personal use).

Why should I pay for FastPaste? What am I missing?
Sep 1 2020 at 12:02pm Copy Link
1
MK Clipdiary is only free under certain conditions. FastPaste has a very useful Projects tabs allowing easy access to specific "project" clips.
I have paid for both Clipdiary and FastPaste and prefer FastPaste. Horses for courses. No one is asking you to pay or use FastPaste.
Sep 1 2020 at 2:21pm Copy Link
1
Dennis McKay I'm confused. Company says licensed to 1 user for 3 PC, and it also says licensed to computer not user, and also that you can install it on a usb thumb drive and run it on as many computers as you want. Which is it? Also noticed on their homepage it hasn't been updated in 3 yesrs 11 months.
Sep 2 2020 at 5:23am Copy Link
0
HJ User Does Fast Paste provide any particular function(s) not available in other paste applications?
Jan 8 at 9:26am Copy Link
0
TROY User Can I enter a simple phrase and and fast paste replace it with a phrase? For example, I type ‘Me2’ and it is replaced with ‘Bob Smith’
Or I type ‘Address’ and it is replaced by ‘123 Main Street’. I currently use Phrase Expander but the Yearly renewal Is expensive.

Also, can Fast Paste add images and formatted text.

Thanks
Jan 8 at 7:36pm Copy Link
0


Our virus scan reports this download is 100% Clean Free Download



BitsDuJour is for People who Love Software
Every day we review great Mac & PC apps, and get you discounts up to 100%
© Copyright 2021 BitsDuJour LLC. Code & Design. All Rights Reserved. Privacy Policy